StarTech Dual-4K Monitor Hybrid Docking Station User Guide
- June 6, 2024
- StarTech
Table of Contents
StarTech Dual-4K Monitor Hybrid Docking Station
Product Diagram (DK30A2DHU/ DK30A2DHUUE)
| Port/LED | Function |
|---|---|
| 1 | 3.5mm Audio Port |
• 4 Position Audio Jack for Headset use
2
|
USB-A Ports x 2
| • Connect a USB Storage Device (e.g. flash drive), or USB Peripheral Device
• USB-A 3.1/3.0 (5Gbps)
3| Power LED| • Solid: The Docking Station is connected and
receiving power
Port/LED| Function
---|---
4| DC 20V Port| • Connect the Universal Power Adapter to supply
power to the Docking Station
• Type-N barrel connector
• 20V 2A
5| USB-B Host Port| • Connect the Host Computer
6| Video 1 Ports| • Connect a DisplayPort Enabled Display Device
• DisplayPort Version 1.2
–Or–
• Connect an HDMI Enabled Display Device
• HDMI Version 2.0
7| Video 2 Ports| • Connect a DisplayPort Enabled Display Device
• DisplayPort Version 1.2
–Or–
• Connect an HDMI Enabled Display Device
• HDMI Version 2.0
8| RJ45 Port| • Connect a Network Device
9| RJ45 LEDs (above the RJ45 Port)| • Green: The Docking Station
detects a link speed of 10 Mb, 100 Mb, or 1 Gb
• Flashing Amber: Indicates network activity
10|
USB-A Ports x 4
| • Connect a USB Storage Device (e.g. flash drive), or USB Peripheral Device
• USB-A 3.1/3.0 (5Gbps)
Requirements
Depending on the Host Laptop’s operating system, the required drivers will
automatically be installed when the Docking Station is connected and powered
on. For the latest drivers, requirements, and instructions, please visit:
www.startech.com/DK30A2DHU
Note: If the drivers do not automatically install, navigate to the
Support tab to locate the driver installation instructions and downloads.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Installation
Connecting a Host
Connect the USB-C to USB-B Cable (included) or the USB-A to USB-B Cable
(included) to the USB-B Host Port on the rear of the Docking Station and the
other end to a USB Port on the Host Computer.
Connecting the Display Devices
1. Connect a DisplayPort or HDMI Cable to the DisplayPort or HDMI Enabled
Display Device and to the Video 1 DisplayPort Port or Video 1 HDMI Port on the
rear of the Docking Station.
2. Repeat step 2 to add a second DisplayPort or HDMI Enabled Display Device
to the Video 2 Ports on the rear of the Docking Station.
Connecting Peripherals
1. Connect an Audio Device to the 3.5 mm Audio Port on the front of the
Docking Station.
2. (Optional) Connect a USB-A Storage Device or other USB-A Peripheral to the
USB-A Ports on the front and/or rear of the Docking Station. Connect up to 6
total USB Devices (2 front, 4 rear).
3. Connect a CAT5e/6 Cable to the RJ45 Port on the rear of the Docking
Station and to an RJ45 Port on a compatible Network Device.
Powering the Docking Station
1. Select the appropriate regional Power Cord and connect it to the Universal
Power Adapter.
2. Connect the Universal Power Adapter to the DC 20V Port on the rear of the
Docking Station and to an AC Electrical Outlet.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by
StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 0.5cm
between the radiator and your body.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way
to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service by
StarTech.com, or an endorsement of the product(s) to which this manual applies
by the third-party company in question. StarTech.com hereby acknowledges that
all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Operation
Configure the Displays
Use the Windows or macOS operating system to adjust display settings for
multiple DisplayPort and/or HDMI Enabled Display Devices.
Warranty Information
This product is backed by a three-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Safety Measures
If product has an exposed circuit board, do not touch the product under power.
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>