EDiMAX BT-8500 Bluetooth 5.0 Nano USB Adapter Installation Guide
- June 6, 2024
- EDIMAX
Table of Contents
BT-8500
Quick Installation Guide
07-2020 / v1.0
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan Email:
support@edimax.com.tw
Edimax Technology Europe B.V.
Fijenhof 2, 5652 AE Eindhoven, The Netherlands Email:
support@edimax.nl
Edimax Computer Company
3444 De La Cruz Blvd., Santa Clara, CA 95054, USA Email:
support@edimax.com
Product Information& Safety Information
The Edimax BT-8500 dual-mode (BR/EDR + LE) real Bluetooth 5.0 is a Nano USB
adapter that supports a data rate maximum of 3 Mbps and can be connected up to
a distance of 300 meters.
The BT-8500 is a portable ultra-small design USB adapter with USB 2.0, you can
plug it into any USB port and enjoy incredible high-speed Bluetooth 5.0.
Please install the unit with the safety restrictions outlined below:
– Do not place the USB adapter in or near hot/humid places, such as a kitchen
or bathroom.
– There are no user-serviceable parts inside the USB adapter. If you
experience problems with the USB adapter, please contact your dealer and ask
for help.
– The USB adapter is an electrical device, if it becomes wet for any reason,
stop using it immediately.
https://www.edimax.com/download
You can find all supporting documents from the link below or via QR Code:
https://www.edimax.com/download
(Once you’ve visited the Edimax official website, please enter model no.
“BT-8500” into the search box to search for your product.)
Package Contents
System Requirement
– Windows 8.1/10 32bit/64bit or above
– Linux: kernel 2.6.32~4.15, suggest 4.4 (after)
– 1 x USB 2.0 Type A
Hardware Interface
| No. | Description |
|---|---|
| 1 | Case |
| 2 | USB 2.0 Type A |
Hardware Installation
Please follow the steps below to install your Bluetooth USB adapter,
-
Turn on your PC.
If your PC or laptop has Bluetooth capability, please disable Bluetooth before using the Bluetooth USB adapter. -
Insert the USB adapter into an available USB port of your computer.
Never use force to insert the USB adapter.
Driver Installation
Please follow the steps below to install the driver,
- Go to the Edimax website (https://www.edimax.com/edimax/global/).
- Enter model no. “BT-8500” into the search box to search for your product, and Go to Download, and download the driver.
- Open the folder and double-click to install the driver.
- Click “Next” to continue and follow the instructions on-screen until installation is complete.
- Select restart your computer now or later and click “Finish”.
Adding Devices
Please follow the steps below to add the Bluetooth devices,
- Go to Windows Bluetooth settings by using the search bar, or by right-clicking the Bluetooth icon in the taskbar and choosing Add a Bluetooth Device.
- Select your Bluetooth device and click Pair and then confirm the passcode.
- Your device is now ready to use when it shows “Connected”.
Uninstall A Driver
Please follow the steps below to uninstall a driver for your USB adapter,
- Open Control Panel using the Start menu or Search function.
- Select Uninstall a program under the Programs category.
- Select Edimax BT-8500 (or similar) and Edimax Bluetooth 5.0 (or similar) and click Uninstall.
- Click Yes to continue.
- Select restart your computer now or later and click “Finish”.
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and specifically
disclaims any warranties, merchantability, or fitness for any particular
purpose. Any software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and
not this company, its distributor, or its dealer) assumes the entire cost of
all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Edimax Technology Co., Ltd.
reserves the right to revise this publication and to make changes from time to
time in the contents hereof without the obligation to notify any person of
such revision or changes.
The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. The software and specifications are
subject to change without notice. Please visit our website
www.edimax.com for updates. All brand and product
names mentioned in this manual are trademarks and/or registered trademarks of
their respective holders.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter. This device complies with Part 15 of
the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate the equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall not
be less than 0.5cm during normal operation.
Federal Communications Commission (FCC) RF Exposure Requirements
SAR compliance has been established in the laptop computer(s) configurations
with PCMCIA slot on the side near the center, as tested in the application for
certification, and can be used in a laptop computer(s) with substantially
similar physical dimensions, construction, and electrical and RF
characteristics. Use in other devices such as PDAs or lap pads is not
authorized. This transmitter is restricted for use with the specific antenna
tested in the application for certification. The antenna(s) used for this
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
RED Compliance Statement
Compliance with 2014/53/EU Radio Equipment Directive (RED)
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table
provides information on the frequency bands used and the maximum RF transmit
power of the product for sale in the EU:
| Frequency range (MHz) | Max. Transmit Power (dBm |
|---|---|
| 2412-2472 | 15.03 |
A simplified DoC shall be provided as follows: Article 10(9)
Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type
N150 Wi-Fi Nano USB Adapter is in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the
following internet address: http://www.edimax.com/edimax/global/
This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Safety
This equipment is designed with the utmost care for the safety of those who
install and use it. However, special attention must be paid to the dangers of
electric shock and static electricity when working with electrical equipment.
All guidelines of this and of the computer manufacture must therefore be
allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in
Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg,
Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Turkey, and United Kingdom. The TSI version of this device is also
authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.
EU Countries Not Intended for Use
None
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU, 2014/35/EU.
W EEE Directive & Product Disposal
****At the end of its serviceable life, this product should not be treated as
household or general waste. It should be handed over to the applicable
collection point for the recycling of electrical and electronic equipment or
returned to the supplier for disposal.
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that
the equipment described below complies with the requirements of the European
Radio Equipment directives.
Equipment: Bluetooth 5.0 USB Adapter
Model No.: BT-8500
The following European standards for essential requirements have been
followed:
Directives 2014/53/EU
Spectrum: EN 300 328 V2.2.2 (2016-11)
EMC: EN 301 489-1 V2.2.3 (2017-02)
EN 301 489-17 V3.2.2 (2017-02)
EMF: EN 62311:2008
Safety (LVD) : IEC 62368-1:2014 (2ndEdition) and/or EN 62368-1:2014+A11:2017
Edimax Technology Europe B.V. a company of :
Fijenhof 2, Edimax Technology Co., Ltd.
5652 AE Eindhoven, No. 278, Xinhu 1st Rd.,
The Netherlands Neihu Dist., Taipei City, Taiwan
Signature:
Printed Name: David Huang
Title: Director
Edimax Technology Europe B.V.
Date of Signature: July 2020
Signature:
Printed Name: Albert Chang
Title:
Director
Edimax Technology Co., Ltd.
References
- EDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart Home
- EDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart Home
- EDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart Home
- EDIMAX - Download
- EDIMAX - Wi-Fi Router, Extender, Access Point, IP Cam, Wi-Fi Smart Plug, IoT, Smart Home, SMB Wi-Fi
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>