EDIMAX BT-8500 USB Bluetooth Adapter User Manual
- June 2, 2024
- EDIMAX
Table of Contents
User Manual
BT-8500
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan
Email: support@edimax.com.tw
Edimax Technology Europe B.V.
Fijenhof 2, 5652 AE Eindhoven, The Netherlands
Email: support@edimax.nl
Edimax Computer Company
530 Technology Drive Suite 100, Irvine, CA 92618, USA
Email: support@edimax.us
Product Information
I-1. Package Contents
I-2. Hardware Overview
I-3. Supported System
– Windows 8.1 / 10 / 11
– Linux
- Additional version information may be announced on the EDIMAX website.
Windows Plug-and-Play Installation
II-1. Insert the USB Adapter
Insert the USB adapter into your computer and then switch on your computer.
Never use force to insert the USB adapter.
Please disable all the existing Bluetooth devices before inserting the device
into your computer. (Refer to IV. FAQ -> Q1)
II-2. Bluetooth Plug-and-Play
If your Windows OS supports Plug-and-Play, the Bluetooth icon will be
displayed on the bottom-right taskbar. (If Bluetooth icon doesn’t display,
please refer to IV. FAQ -> Q2)
Notice that if the Bluetooth icon does not show up, continue to click the
arrow-up icon.
If your Operating System does not recognize the USB adapter, you need to
install an additional driver on your computer. Please refer to “Section III”.
II-3. Pair with the Bluetooth Device
- Click “Add a Bluetooth Device”.
- Select existing Bluetooth devices from the list or click “Bluetooth & other devices” to add an new Bluetooth device.
- Select the Bluetooth device in “Paired” status you want to pair with and click “Connect”.
- Once the status is “Connected”, the connection is established.
Windows Driver Installation
III-1. Insert the USB Adapter
Insert the USB adapter into your computer and then switch on your computer.
Never use force to insert the USB adapter.
Please disable all the existing Bluetooth devices before inserting the device
into your computer. (Refer to IV. FAQ -> Q1)
III-2. Download the Driver
-
You can find the USB adapter driver from the Edimax website.
https://www.edimax.com/download
If your computer can not access the Internet directly, please use an Internet- Enabled device to download the driver instead. -
Enter the model number and click to continue.
-
Click on the model number.
Ensure the model number corresponds with your USB adapter. -
Scroll down the web page and select the correct OS version. Move the cursor to the “Download icon” and save the driver on the computer desktop or a location you prefer.
Ensure you download the correct version. Copy the driver to the USB flash drive first if you downloaded the driver on another Internet-Enabled device and insert the USB flash drive to the computer you will use the USB adapter
- Move the cursor to the driver you just downloaded and extract the file.
III-3. Pair with the Bluetooth Device
-
To install the Bluetooth, once it’s uncompressed fully, access the folder “Bluetooth” and click “Setup.exe” to continue.
-
Click ick “Next” to continue and follow the instructions on-screen until installation is completed.
-
When the installation is completed, you will be asked to select whether you wish to restart your computer now or later. Select “Yes” and click “Finish” to continue.
-
Click the Bluetooth icon displayed on the bottom-right taskbar to pop up the menu. (If Bluetooth icon is not displayed, please refer to IV. FAQ -> Q2)
Notice that if the Bluetooth icon does not show up, click the arrow-up icon. -
Click “Add a Bluetooth Device”.
-
Select the existing Bluetooth devices from the list or click “Bluetooth & other devices” to add new Bluetooth devices.
-
Select the Bluetooth device in “Paired” status you want to pair with and click “Connect”.
-
Once the status is ”Connected”, the connection is established.
Frequently Asked Question (FAQ)
Q1. How to disable the existing Bluetooth device?
A. Right-click the Windows Start button , and select the “Device Manager”.
Expand all the Bluetooth devices. Right-click on target device and disable the
bluetooth device one by one.
Q2. Why doesn’t the Bluetooth icon display on the Windows taskbar?
A1. Click Windows Start button , and click “Setting” , select “Device and
other setting” , and set the stauts as “On” to enable thbluetooth service.
A2. If the Bluetooth icon still doesn’t appear, you may need to install the driver and try again. Please go to section III-2, to download and install the driver and try again.
More Information
For more information, please visit our website with the following URL or scan the QR code:
https://www.edimax.com/download
Please search the model number to enter the referred page.
Safety Instructions
The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details.
- This product is designed for indoor use only.
- Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product.
- The device contains no user serviceable parts. Do not attempt to service the product and never disassemble the product.
- Do not spill food or liquid on your product and never push any objects into the openings of your product.
- Do not use this product near water, areas with high humidity, or condensation.
- Keep the product away from radiators and other heat sources.
- This device is not designed to be operated by children.
- Always unplug the product from mains power before cleaning and use a dry lint free cloth only
Simplified EU Declaration of Conformity
Hereby, Edimax Technology declares that the radio equipment type, Wi-Fi USB
Adapter, is in compliance with Directive 2014/53/EU, 2014/35/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
https://www.edimax.com/download/doc
COPYRIGHT
Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or
by any means, electronic, mechanical, magnetic, optical, chemical, manual or
otherwise, without the prior written permission from Edimax Technology Co.,
Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and specifically
disclaims any warranties, merchantability, or fitness for any particular
purpose. Any software described in this
manual is sold or licensed as is. Should the programs prove defective
following their purchase, the buyer (and not this company, its distributor, or
its dealer) assumes the entire cost of all necessary servicing, repair, and
any incidental or consequential damages resulting from any defect in the
software. Edimax Technology Co., Ltd. reserves the right to revise this
publication and to make changes from time to time in the contents hereof
without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. The software and specifications are
subject to change without notice. Please visit our website
www.edimax.com for updates. All brand and product
names mentioned in this manual are trademarks and/or registered trademarks of
their respective holders.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter. This device complies with Part 15 of
the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 5mm between the radiator & your body.
RED Compliance Statement
Compliance with 2014/53/EU Radio Equipment Directive (RED)
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table
provides information on the frequency bands used and the maximum RF transmit
power of the product for sale in the EU:
| Frequency range (MHz) | Max. Transmit Power (dBm) |
|---|---|
| 2412-2472 | 9.97 |
A simplified DoC shall be provided as follows: Article 10(9)
Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type
Bluetooth 5.0 USB Adapter is in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the
following internet address: http://www.edimax.com/edimax/global/
Safety
This equipment is designed with the utmost care for the safety of those who
install and use it. However, special attention must be paid to the dangers of
electric shock and static electricity when working with electrical equipment.
All guidelines of this and of the computer manufacture must therefore be
allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in
Austria, Belgium, Bulgaria ,Croatia, Cyprus, Czech, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Turkey, and United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member
states: Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries Not Intended for Use
None
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept
any interference, including interference that may cause undesired operation of
the device.
The products are compliant with SAR for general population/uncontrolled
exposure limits in IC RSS-102 and has been tested in accordance with the
measurement methods and procedures specified in IEEE 1528. Maintain at least
0.5 centimeters distance for body-warn condition.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and operated
with a minimum distance of 0.5 centimeters between the radiator and your body.
CAN ICES-003（B）/ NMB-003（B）
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU, 2014/35/EU.
WEEE Directive & Product Disposal
**** At the end of its serviceable life, this product should not be treated
as household or general waste. It should be handed over to the applicable
collection point for the recycling of electrical and electronic equipment, or
returned to the supplier for disposal.
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility,
that the equipment described below complies with the requirements of the
European Radio Equipment directives.
Equipment: Bluetooth 5.0 USB Adapter
Model No.: BT-8500
The following European standards for essential requirements have been
followed:
Directives 2014/53/EU
Spectrum : EN 300 328 V2.2.2 (2019-07)
EMC : EN 301 489-1 V2.2.3 (2019-11) Class B
EN 301 489-17 V3.2.4 (2020-09)
EMF : EN 62479:2010 and EN 50663:2017
Safety (LVD) : IEC 62368-1:2018 and/or EN IEC 62368-1:2020+A11:2020
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Date & Place of Issue: 31/March/2023, Eindhoven
a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Date & Place of Issue: 31/March/2023, Taipei
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that
the equipment described below complies with the requirements of the United
Kingdom Radio Equipment directives.
Equipment: Bluetooth 5.0 USB Adapter
Model No.: BT-8500
The following European standards for essential requirements have been
followed:
Radio Equipment Regulations 2017 (S.I. 2017/1206)
Spectrum : EN 300 328 V2.2.2 (2019-07)
EMC : EN 301 489-1 V2.2.3 (2019-11) Class B
EN 301 489-17 V3.2.4 (2020-09)
EMF : EN 62479:2010 and EN 50663:2017
Safety (LVD) : IEC 62368-1:2018 and/or EN IEC 62368-1:2020+A11:2020
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Date & Place of Issue: 31/March/2023, Eindhoven
a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Date & Place of Issue: 31/March/2023, Taipei
References
- EDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart Home
- EDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart Home
- EDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart Home
- EDIMAX - Download
- EDIMAX - Download