EDIMAX GP-102IT Gigabit 60W PoE Injector Installation Guide

: June 6, 2024
: EDIMAX

Table of Contents

Product Information
Package Contents
Hardware Overview
LED Status
Hardware Installation
COPYRIGHT
Federal Communication Commission Interference Statement
Safety
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EDIMAX GP-102IT Gigabit 60W PoE Injector Installation Guide

Product Information

The Edimax PoE Injector GP-102IT complies with IEEE 802.3af/at/bt standard and provides both power and data to any IEEE 802.3af/at/bt compliant devices. Users can easily set up a reliable wired network in your home or office.

You can find all supporting documents from the link below or via QR Code:
https://www.edimax.com/download

(Once you’ve visited the Edimax official website, please enter the model no.
“GP-102IT” into the search box to search for your product.)

Package Contents

Before start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s):

PoE Injector
QIG
Power Cord
Robber Pad
Screws

System Requirements

Support 10/100/1000M BASE-T RJ45 port
Support IEEE802.3 af/at/bt standard and 60W PoE Power

Hardware Overview

No.| Description|
---|---|---
1| DATA| Port
2| PoE/DATA Port| The PoE/DATA port sends power and Ethernet data to your PoE PD
3| Power Socket| The DATA port doesn’t deliver power

LED Status

Function	Color	Status	Description
PWR	Green	On	Power off or fail
Off	Power on
PoE	Green	On	Power output on
Off	Power output on

Hardware Installation

This section will guide you through the steps to set up the GP-102IT PoE injector. To connect a PoE Injector, please follow the steps below,

Plug injector power cord into a wall outlet.
Plug an Ethernet cable from the the DATA port to the router or switch.
Plug an Ethernet cable from the PoE/DATA port to the device or any devices that base unit Ethernet port.

COPYRIGHT

Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.

Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of Their respective holders.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

R &TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal equipment and the mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.

Warning: Operation of this equipment in a residential environment could cause radio interference.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.

EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.

EU Countries Not Intended for Use
None

EU Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 2014/30/EU.

Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives.

Equipment: 1-port Giga Ethernet 60W PoE Injector
Model No.: GP-102IT

The following European standards for essential requirements have been followed:

Directives 2014/30/EU

EMC : EN 55032:2015
EN 61000-3-2:2014 Class A
EN 61000-3-3:2013
EN 55035:2017
Safety (LVD) : EN 62368-1:2014+A11:2017

Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands

a company of :
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd.,
Neihu Dist., Taipei City,
Taiwan

Signature:

Printed Name: David Huang
Title: Director Edimax Technology Europe B.V.

Date of Signature: May, 2020
Signature:
Printed Name: Albert Chang
Title: Director
Edimax Technology Co., Ltd.

WEEE Directive & Product Disposal

At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.