EDIMAX EN-9320TX-E V2 10 Gigabit Ethernet PCI Express Server Adaptor Installation Guide
- June 6, 2024
- EDIMAX
Table of Contents
EN-9320TX-E V2 & EN-9225TX-E
Quick Installation Guide
05-2021 / v1.1
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist , Taipei City, Taiwan
Email: support@edimax.com.tw
Edimax Technology Europe B.V.
Fijenhof 2, 5652 AE Eindhoven, The Netherlands
Email: support@edimax.nl
Edimax Computer Company
530 Technology Drive Suite 100, Irvine, CA 92618, USA
Email: support@edimax.us
I. Product Information
The two hyper speed Edimax 10G EN-9320TX-E V2 and 2.5G EN-9225TX-E Network Cards each ensure backward compatibility with your network infrastructure.
The 10G EN-9320TX-E V2 Network Card provides and supports fast 10G speed with backwards compatibility of 10GbE, 5GbE, 2.5GbE, 1GbE and 100MbE networking standard that delivers a speed of up to 10Gbps which is 10 times faster than standard gigabit Ethernet. The other 2.5G 3 speeds EN-9225TX-E Network Card provides 2.5GbE, 1GbE and 100MbE networking standard.
And what’s more, both of the network cards support QoS that helps improve your router’s Internet traffic management capabilities through better bandwidth allocation.
You can find all supporting documents from the link below or via QR Code:
https://www.edimax.com/download
(Once you’ve visited the Edimax official website, please enter the model no. “EN-9320TX-E V2 or EN-9225TX-E” into the search box to search for your product.)
Download
To select your product and find related download materials, enter the model
number into the search box on the right side or follow the simple steps below:
*Feel free to contact us anytime if you need help or if you can’t find your product.
I-1. Package Contents
Please refer to your product for the illustrations below,
EN-9320TX-E V2 or EN-9225TX-E
Low Profile Bracket QIG
I-2. Driver Support / System Requirements
EN-9320TX-E V2:
– Windows 7, 8, 8.1,10 (32/64-bit)
– Linux kernels support to 3.0 ~ 4.9
EN-9225TX-E:
– Windows 7, 8, 8.1,10 (32/64-bit)
– Linux kernels support to 3.1, 3.12, 3.2, 4.2, 4.4
I-3. LED Indicator
EN-9320TX-E V2:
| Color | LED Status | Description |
|---|---|---|
| Yellow | On | 5Gbps / 2.5Gbps / 1Gbps/ 100Mbps |
| Green | On | – 10Gbps |
– No data transmission
Blinking| Green light blinking when transmitting data
EN-9225TX-E
| Color | LED Status | Description |
|---|---|---|
| Yellow | On | 1Gbps / 100Mbps |
| Green | On | – 2.5Gbps |
– No data transmission
Blinking| Green light blinking when transmitting data
I-4. Hardware Overview
EN-9320TX-E V2 & EN-9225TX-E:
| No. | Description |
|---|---|
| 1 | RJ45 Port |
| 2 | Standard Profile Bracket |
| 3 | PCI-E (EN-9320TX-E V2 X4/EN-9225TX-E X1) |
II. Hardware Installation
Please follow the instructions below to install the network adapter in your PC,
1. Turn off the PC and unplug the power cord.
2. Remove the side panel of the computer by unscrewing it and identify empty
PCI-E slot.
3. Install the card by firmly pressing it into the expansion slot,
4. Reattach the side panel and put the power cord back
III. Install Driver
Please follow the instructions below to install and uninstall the driver.
III-1. Driver Installation
You can find diver from the Edimax website below or via QR Code:
https://www.edimax.com/download
(Once you’ve visited the Edimax official website, please enter the model no. “EN-9320TX-E V2 or EN-9225TX-E” into the search box to search for your product.)
Click on download button to visit download page:
III-2. Driver Uninstallation
For Windows 10:
1. Open Control Panel using the Start menu or Search function.
2. Select “Uninstall a program” under the programs category.
3. Select “Edimax” (or similar) and click “Uninstall)
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the authority to operate equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Safety
This equipment is designed with the utmost care for the safety of those who
install and use it. However, special attention must be paid to the dangers of
electric shock and static electricity when working with electrical equipment.
All guidelines of this and of the computer manufacture must therefore be
allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in
Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg,
Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Turkey, and United Kingdom. The ETSI version of this device is also
authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.
EU Countries Not Intended for Use
None
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU.
FOR USE IN AT BE BG CZ DK DE
EE IE EL ES FR HR IT CY LV LT
LU HU MT NL PL PT RO SI SK FI
SE UK UK(NI) TR IS LI NO CH RU UA
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives.
Equipment: 3-speed 2.5GBase-T / NBASE-T Network Adapter Card
Model No.: EN-9225TX-E
The following European standards for essential requirements have been followed:
Directives 2014/30/EU
Spectrum : EN 55032:2015+AC:2016 Class B
AS/NZS CISPR 32:2015 Class B
EN 55035:2017
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Printed Name: David Huang
Title: Director
Edimax Technology Europe B.V.
a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd.,
Neihu Dist., Taipei City,
Taiwan
Date of Signature: Jan., 2020
Signature:
Printed Name: Albert Chang
Title: Director
Edimax Technology Co., Ltd.
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives.
Equipment: 5-speed 10GBase-T / NBASE-T Network Adapter Card
Model No.: EN-9320TX-E V2
The following European standards for essential requirements have been followed:
Directives 2014/30/EU
Spectrum : EN 55032:2015+AC:2016 Class B
EN 55035:2017
AS/NZS CISPR 32:2015 Class B
CISPR 32:2015+C1:2016 Ed. 2.0 Class B
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Printed Name: David Huang
Title: Director
Edimax Technology Europe B.V.
a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd.,
Neihu Dist., Taipei City,
Taiwan
Date of Signature: Jan., 2020
Signature:
Printed Name: Albert Chang
Title: Director
Edimax Technology Co., Ltd.