EDIMAX EK-2U2C 2 Ports USB KVM Switch with Cables User Manual
- June 3, 2024
- EDIMAX
Table of Contents
EK-2U2C 2 Ports USB KVM Switch with Cables
User Manual
Introduction
This Edimax USB KVM Switch allows you to ccutrd two computers from one USB
Keytoerd, USB Mouse and Video Monitor.
Features
- USB bus powered
- Fully complant with USB 1.1 specifications and delivers a 12Mbps data eansmission rate
- USB Hot keys switching and hardware switch button for manual switching
- LED display for easy status =Waiting
- No drivers or firmware needed for Windows and Mac OS
Installation
Specifications
| Max. PC Connections | 2 |
|---|---|
| PC Port Connector | HD-15M x2, USB A type x2 |
| Console Port Connector | HD-15F x1, USB A type x2 |
| PC Selection | Hot Key / Switch button |
| KVM Cable | 2 x 1.2 meters |
| VGA Cable | VGA HD-15F |
| VGA Resolution | 1920 x 1440 |
| Scan Intervals | 510,15,20,25,30 Sec. |
| Bandwidth | 250M Hz |
| Operation Temperature | 0-40 Degrees Celsius |
| Dimensions | 130x 76x 43 |
| Weight | 320g |
Introduction
| No. | Feature | Function |
|---|---|---|
| 1 | USB A Type | For USB Mouse |
| 2 | HD-15F | For Monitor |
| 3 | USB A Type | For USB Keyboard |
| 4 | LEDs | Indicate Activity |
| 5 | Switch button | Select a PC |
| 6 | PC1 Cable | To connect to PC1 |
| 7 | PC2 Cable | To connect to PC2 |
Keyboard hot key
Hot-key Definition
Scroll + Scroll + 1| Switch to PC1
Scroll + Scroll + 2| Switch to PC2
Scroll + Scroll + or| Switch to other PC
Scroll + Scroll +| Switch to other PC
Scroll+Scroll+S| Auto-scan mode every 10 second
When shutting down a PC, please switch to the other PC before the power
shuts down.
Notes:
-
Each USB port is purpose specific. Plug your USB keyboard into the keyboard port and your USB mouse into the mouse port as indicated by the symbols on the KVM switch.
-
You can use a keyboard-hub (USB keyboard port).
-
You cannot attach other USB devices to the KVM switch. If you’re using a keyboard-hub. DO NOT plug other USB devices into it.
-
Before you turn on a computer, connect it to the KVM switch. Also make sure that the mouse, keyboard and computer screen are plugged Into the KVM switch.
-
DO NOT use the KVM hardware switch button or hot keys to switch between computers before the mouse and keyboard are activated. If you do. you may lose keyboard and mouse control. Two helpful notes:
A. When restarting a computer, hot keys are the better way to switch between computers.
B. When plugging a keyboard or mouse in or out, hot keys are the better way to switch between computers. -
To wake a PC up from sleep mode, press F12 on the keyboard or move the mouse.
Limited Warranty
IN NO EVENT WILL THE DIRECT VENDORS LIABILITY EXCEED THE PRICE PAID FOR THE
PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDEN-TAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, OR ITS DOCUMENTATION.
The direct vendor makes no warranty or representation, expressed. implied, or
statutory with respect to the contents or use of this documentation, and
specially disclaims Its quality, performance, merchantability, or fitness for
any particular purpose. The direct vendor also reserves the right to revise or
update the device or documentation without obligation to update. For further
inquiries please contact your direct vendor.
Preventing Radio & TV Interference
WARNING!!! This equipment generates, uses.and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions MANUAL, may cause Interference to radio communications. It has
been tested and found to comply with the limits for a Class A computing device
pursuant to Subpart J of part15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area could cause
interference in which case the user at his own expense will be required to
take whatever measures may be required to correct the interference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>