Kogan 27″ Full HD IPS Freesync Monitor KAMN27F7SA User Guide

: June 6, 2024
: Kogan

USER GUIDE

Kogan 27 Full HD IPS Freesync Monitor KAMN27F7SA

27″ FULL HD IPS FREESYNC

MONITOR (75Hz,1920 x 1080)

KAMN27F7SA

SAFETY & WARNINGS

Read all instructions before using the appliance and retain for reference.
Unplug the monitor before cleaning it.
Use a clean, slightly dampened cloth to wipe the main monitor body.
To clean the screen: Turn it off, unplug it and wait for it to cool completely, then wipe it with a dry microfiber cloth.
Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
Do not insert any object or spray any liquid into the vents.
Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking adequate ventilation.
Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
Unplug the monitor if it is not going to be used for an extended period.
Do not place heavy objects on the monitor, its power cord or any connected cable.
Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.

KAMN27F7SA - HDMI | The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
---|---

PARTS

|
---|---
Monitor| Stand connector
| | **
Stand base| Screws(x5)| VESA connectors(x4)
KAMN27F7SA - Parts - HDMI Cable | **|
HDMI cable| Power cable| User guide

OVERVIEW

Monitor Controls

KAMN27F7SA - Monitor Controls
1. Menu button: Press to display the OSD menu or enter sub-menus.
2. Down button: Press to move down in the menu.
3. Up button: Press to move up in the menu.
4. Exit button: Press to exit.
5. Power button: Press to turn the monitor ON/OFF.
Monitor Ports
KAMN27F7SA - Monitor Ports
6. Power connector
7. Audio out
8. VGA connector
9. HDMI connector

STAND ASSEMBLY

Attention: Panel is fragile. Keep the foam underneath the monitor while assembling the stand.

1. Remove the stand base and connector from the packaging and assemble them with the included screws.

KAMN27F7SA - Stand Assembly 1

1 Stand
2 Screw
3 Base

2. Remove the upper piece of foam from the monitor and attach the stand to the monitor with the included, then place the plastic cover over the connection.

KAMN27F7SA - Stand Assembly 2

4 Base Plastic Cover
5 Screw x 3

VESA MOUNT

1. Remove the monitor from the packaging with the protective form attached and gently place on a desktop or table. Press the release button to remove the stand plate. If the monitor was already attached to the stand, remove the stand.

KAMN27F7SA - VESA Mount 1

2. Remove the original screws from the opening in the back of the monitor as per (1) below.
Follow the directions received with your mount, stand or accessory to connect. Use the included 4 screws when mounting the monitor.

KAMN27F7SA - VESA Mount 2c

KAMN27F7SA - VESA Mount 2a

Screw x 4

3. Follow the directions received with your mount, stand or accessory and install the monitor on the wall or fixture as desired.

Mount (Not included)

KAMN27F7SA - VESA Mount 3a KAMN27F7SA - VESA Mount
3b

CONNECTIVITY

Power Cable

Connect the included power cable to the monitor power port and then connect the other end to a power outlet.

KAMN27F7SA - Connectivity - Power Cable

Earphones (Audio Out)

You can connect earphones or another audio device to the 3.5mm output on the monitor. You may need to set the Kogan monitor as your PC’s sound output device.

KAMN27F7SA - Connectivity - Earphones

HDMI

Connect an HDMI cable from the computer’s display output to the monitor’s display input.

KAMN27F7SA - Connectivity - HDMI

VGA

Connect a VGA cable from the computer’s display output to the monitor’s display input.

KAMN27F7SA - Connectivity - VGA

OPERATION

Connect the monitor to your input device via HDMI or DisplayPort.
Connect the power cable to your monitor and then connect the other end directly to a power socket.
Use the power button to turn the monitor on.

The On-Screen Display (OSD) may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing the “M” button.

When using the monitor for the first time, the monitor will configure optimal settings automatically.

1. Press “Menu” to enter the OSD menu.

2. Press or to browse functions.
With the desired function highlighted, press “Menu” to enter the sub-menu.
Press or to browse sub-menus, then press “Menu” to highlight the desired function.
Press or to highlight an option, then press “Menu” to confirm the settings and exit the current screen.

3. Press “Exit” to exit the current screen.

List of Functions

Main Menu	Sub-Menu	Options	Description
Image	Brightness	~0-100	Adjust display brightness
Contrast	~0-100	Adjust display contrast
Black equalizer	~0-100	Adjust display Black equalizer
Low blue	On	Enable/disable blue light reduction

ECO MODES & GAMEPLUS SWITCHING

1. Press “Exit” button to activate the navigation window.

KAMN27F7SA - Eco Modes & Gameplus switching 1

2. Press “Menu” button to switch Gameplus modes. These overlay icons are primarily designed to assist aim during FPS games, though they can be used for other scenarios.

KAMN27F7SA - Eco Modes & Gameplus switching 2a

SPECIFICATIONS

Screen Size	27″
Aspect Ratio	16:9
Brightness	250cd/m2 (Typ.)
Panel	IPS
Resolution	1920×1080
Refresh Rate	75Hz
Response Time	14ms
Viewing Angle	≥178°(H)/178°(V)
Contrast Ratio	1000:1
VESA Mounting	75x75mm
Colours	16.7M
Signal Input	HDMI1.4×1, VGAx1
Power	AC 100-240V ~50/60Hz 1.1A

NOTES

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com