StarTech USB-C 10Gbps Single Monitor Mini Docking Station User Guide

Quick-Start Guide

USB-C™ 10Gbps Single Monitor Mini Docking Station with HDMI, DP, or VGA | PD | 24cm Wrap Around Cable
Product Diagram (DKT31CHDVCM)

Station.
Note: The connected Host Laptop must be enabled with DP ALT Mode.
3| HDMI Port| • Used to connect a Display Device to the Docking Station.
Note: The connected Host Laptop must be enabled with DP ALT Mode.
4| VGA Port| • Used to connect a Display Device to the Docking Station.
Note: The connected Host Laptop must be enabled with DP ALT Mode.
5| USB-A Port x 2| • Used to connect a USB Peripheral Device to the Docking Station.
• Allows you to fast-charge devices that comply with USB Battery Charging Specification Revision 1.2.
• Supports up to 5V at 1.5A, 7.5W charging.
6| USB-C Port| • Used to connect a USB Peripheral Device to the Docking Station.
• Supports up to 5V at 1.5A, 7.5W charging.
• Can also be used for PD Pass-Through.
7| USB-C Connector| • Used to connect the Docking Station to a Host Laptop.

Requirements
For the latest requirements, please visit www.startech.com/DKT31CHDVCM
Host

•  A Laptop with USB-C or Thunderbolt 3 port and with DP ALT Mode enabled x 1

Display

• VGA, HDMI, or DisplayPort compatible x 1

Cables (depends on configuration)

•  VGA Cable x 1
• HDMI Cable x 1
• DisplayPort Cable x 1
•  CAT5e/6 Cable x 1

Powering the Docking Station

1. Unravel the Wrap Around Cable from the Docking Station Housing, by holding onto the USB-C Connector and gently pulling the cable outward, away from the Docking Station Housing.
2.  Connect the USB-C Connector to a USB-C or Thunderbolt 3 port on the Host Laptop.

Connecting a Display to the Docking Station
When more than one Display is connected to the Docking Station, the first Display that was connected will be the active Display until the Display is disconnected from the Docking Station. The priority when you have three monitors connected to the Docking Station is as follows: DisplayPort -> HDMI -> VGA.

DisplayPort

• Connect a DisplayPort Cable (sold separately) to the DisplayPort Port on the Docking Station and the other end to a DisplayPort port on a Display Device.
  HDMI
  

• Connect a HDMI Cable (sold separately) to the HDMI Port on the Docking Station and the other end to an HDMI port on a Display Device.
  VGA

• Connect a VGA Cable (sold separately) to the VGA Port on the Docking Station and the other end to a VGA port on a Display Device.

Connecting Peripherals to the Docking Station
RJ45

• Connect a CAT5e/6 Cable (sold separately) to the RJ45 Port on the Docking Station and the other end to an RJ45 port on a Network Device.

USB-A

• Connect a USB Peripheral’s Connector to the USB-A Port on the Docking Station.

USB-C

• Connect a USB Peripheral’s Connector to the USB-C Port on the Docking Station.

Product Resolution

• Only supported when host port supports DP 1.4

Product Dimensions

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Warranty Information

This product is backed by a three-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.

StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
---|---|---

References

• holders.fr
• USB C Multiport Adapter - HDMI/DP/VGA - USB-C Multiport Adapters | StarTech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>