StarTech HB30C1A1CPD 2-Port USB 3.0 Hub with USB Power Delivery User Guide
- June 6, 2024
- StarTech
Table of Contents
Quick-Start Guide
2-Port USB 3.0 Hub with USB Power Delivery
Product Diagram (HB30C1A1CPD)
| **** | Component | Function |
|---|
| USB-C Connector| Used to connect the Hub to a Host Computer.
2.| USB-A Port| Connect a USB Peripheral to the Hub (mouse,
flash drive, etc.).
3.| USB-C Port| • Connect a USB Peripheral to the Hub (mouse, flash drive,
etc.).
• Connect a USB-C Power Adapter to the Hub to power the Hub.
• USB Power Delivery 2.0 will deliver 60 watts of power through a USB-C or
Thunderbolt 3 port on the Host Laptop.
• Data transfer 5Gbps.
Requirements
For the latest requirements, please visit www.startech.com/HB30C1A1CPD
- A laptop with a USB-C or Thunderbolt 3 port that supports Power Delivery (PD) 2.0 (If your laptop does not support PD 2.0, you can not use the hub to pass power through to a laptop).
- (Optional) A USB-C Power Adapter
- (Optional) An AC Electrical Outlet
Connecting the Hub to a Laptop (Bus Powered)
1. Connect the USB-C Connector on the Hub to a USB-C port on a Host Laptop.
2. Connect a USB Peripheral to the USB-A Port on the Hub.
3. Connect a USB peripheral to the USB-C Port on the Hub.
Connecting the Hub Using PD 2.0
Make sure that the USB-C port on the Host Laptop supports USB Power Delivery 2.0.
- Connect the USB-C plug on the USB-C Power Adapter to the USB-C Port on the Hub.
- Connect the USB-C Power Adapter to an AC Electrical Outlet.
- Connect the USB-C Connector on the Hub to a USB-C port on a Host Laptop.
- Connect a USB Peripherals to the USB-A Port on the Hub.
Troubleshooting
I can not use the Hub to charge a Laptop
- To use the hub to power and charge your laptop, make sure that the USB-C port on your laptop supports USB Power Delivery 2.0.
- Some laptops require 60W or more to support USB Power Delivery 2.0. If your laptop requires 60W or more, you won’t be able to use the USB Power Delivery 2.0 feature.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and
more, visit www.startech.com/support.
Manual Revision: January 31, 2020 3:55 PM
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by
StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept
any interference, including interference that may cause undesired operation of
the device.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way
to StarTech.com. Where they occur these references are
for illustrative purposes only and do not represent an endorsement of a
product or service by StarTech.com, or an endorsement
of the product(s) to which this manual applies by the third-party company in
question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained
in this manual and related documents are the property of their respective
holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
Safety Measures
If the product has an exposed circuit board, do not touch the product under
power.
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
The U.S.A.
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>