Kogan T3 True Wireless Earbuds KATWST3LHSA User Guide
- June 6, 2024
- Kogan
Table of Contents
T3 TRUE WIRELESS EARBUDS WITH WIRELESS CHARGING CASE
KATWST3LHSA
OPERATION
Bluetooth pairing
Remove both earbuds from the charging case: they enter pairing mode within
approximately 10 seconds with an audio tone and “Pairing” prompt.
Activate Bluetooth on your device, search for devices, and select T3. The
earbuds will give a “Connected” prompt after a successful connection.
Enter 0000 if prompted for a password.
Earbud Controls
| Function | Left | Right |
|---|---|---|
| Play/Pause | Tap xl | Tap xl |
| Previous Song | Tap x2 | |
| Next Song | Tap x2 | |
| Volume + | Touch and hold | |
| Volume – | Touch and hold | |
| Answer/End a call | Tap xl | Tap xl |
| Reject call | Touch and hold for 3 seconds | |
| Voice assistant | Tap x3 |
Low Battery
Your earbuds let you know your battery level is low. Every 20 seconds you will
hear “Battery Low” when there is 5 minutes of battery level.
Charging the Earbuds
Insert the earbuds into the case and connect a charging cable to the case to
charge the earbuds. The earbud LEDs will be a solid blue.
When the earbuds are fully charged, the earbud LEDs will off and the charging
case LED will be a solid red LED.
Earbud LED Status Indicators
| Charging | Solid blue |
|---|---|
| Full charge | Off |
| Pairing | Flashing blue |
Charging the Case
Connect an adapter with 5V output with a type C charge cable.
| Charging | Flashing blue |
|---|---|
| Full charge | Steady blue light |
Notes:
The earbuds will turn off automatically after 5 minutes if there is no
connection to another device.
The earbuds will exit pairing mode automatically after 3 minutes if there is
no connection to another device.
SPECIFICATIONS
Earbud
| Size | 23.4 x 18.5 x 21mm (one earbud) |
|---|---|
| Weight | 6.3g (one earbud) |
| Earbud charging port | Magnetic type |
| Earbud charging current | 80mA |
| Earbud charging time | 2 hours |
| Working voltage | 3.3V-4.2V |
| Standby time | Approx. 160 hours |
| Operation time | Music Time:11 hours I Talk Time:11 hours |
| Operation time w. charging case | Music Time: 60 hours I Talk Time: 60 hours |
| Bluetooth version | Bluetooth 5.0 |
| Bluetooth chip | BES2300 |
| Supported profiles | HSP, HFP, A2DP, AVRCP |
| RF transmit | class 2 |
| RF input impedance | 50ohm |
| RF emissive power | 9dBm |
| Receive sensitivity | -89dBm |
| Transmission range (Hz) | 2.40GHz-2.48GHz |
| Transmission distance | Approx. 10m |
| True Wireless Stereo | Yes |
| Audio sampling accuracy | 16bits |
| Audio sampling rate | Up to 96kHz |
| Audio encoding format | CVSD, MSBC, SBC, ACC |
| SNR | >95dB |
| Working temperature | -15°C–+60°C |
| Working humidity | 10%-85% (varies according to temperature) |
| Water resistance rating | IPX6 |
Speaker
| Speaker specifications/mode | 0 9mm |
|---|---|
| Impedance | 16ohm/type |
| Frequency (Hz) | 20Hz – 20KHz |
| Sensitivity | 93±3dB |
| Input power | 2mW ( normal), 5mW ( maximum) |
Microphone
| MIC sensitivity | -42±3dB |
|---|---|
| SPL | 130dB |
Charging Case
| Size | 23.4 x 18.5 x 21mm |
|---|---|
| Weight | 44.3g |
| Charging port | Micro USB |
| Battery | Li-polymer Battery 1000mAh 3.7V/3.7Wh |
| Input voltage | DC5V |
| Charging current | 330mA |
| Output voltage | DC5V |
| Discharge current | 160mA |
| Working temperature | -15°C-+60°C |
| Working humidity | 10%-85% (varies according to temperature) |
Need more information?
This is a Quick Start Guide, and we hope that this has given you the
assistance needed for a simple setup.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>