QNAP QSW-M408 Series User Guide
- June 6, 2024
- QNAP
Table of Contents
QSW-M408 Series
Quick Installation Guide
Package Contents
Hardware Overview
Front Panel Ports
- Console port
- 1GbE RJ45 ports
- 10GbE SFP+ ports
- 10GbE SFP+/RJ45 Combo ports
- Reset button
Top Panel
Power Input
Hardware Installation
Accessing the Web User Interface
The QSW-M408 series supports DHCP clients by default. When connected to a network, the switch will obtain an IP address from a DHCP server automatically. You can then use Qfinder to locate the switch and access the web user interface. If your network is not connected to a DHCP server, you can access the web user interface by changing your computer’s IP address to 169.254.100.102. The default IP address of the QSW-M408 is 169.254.100.101
Note : After configuration, ensure that you change your computer’s IP address back to the original setting.
Web User Interface Login
Default username: admin Default password: same as MAC Address
When logging in for the first time, you will be prompted to set a new username and password. QNAPstrongly recommends setting a new username and password for security purposes.
LED Behavior
| LED | Status | Description |
|---|---|---|
| 0 System Status | Flashing | Device is booting. |
| Green | Device is booted. | |
| Off | Device is powered off. | |
| 12145 | Green (Left) | Link is operating at 1 Gbps. |
| Amber (Right) | Link is operating at 100/10 Mbps. | |
| Flashing | Network is active. | |
| Off | No link. | |
| CO SEP+ | Green | Link is operating at 10/1 Gbps. |
| Flashing | Network is active. | |
| Off | No link. | |
| 0 SFP+/12145 Combo | Green (SFP+) | Link is operating at 10/1 Gbps. |
| Green (RJ45) | Link is operating at 10 Gbps. | |
| Amber (RJ45) | Link is operating at |
5Gbps/2.5Gbps/1Gbps/100Mbps.
Flashing| Network is active.
Off| No link.
Specifications
| Model | QSW-M408-4C | QSW-M408-2C | QSW-M408S |
|---|---|---|---|
| Dimensions (H x W x D) | 42.5 x 290 x 127 mm | ||
| Net weight | 1150 g | 1150 g | 1145 g |
| Input voltage range | 100 – 240VAC | ||
| Switching capacity | 96 Gbps | ||
| R145 ports | 8 | ||
| SFP+ ports | N/A | 2 | 4 |
| Combo ports (SFP+/R145) | 4 | 2 | N/A |
| Operating temperature | 0°C to 40°C (32°F to 104°F) | ||
| Relative humidity | 5% to 95% |
(non-condensing)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Class B Notice:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
Modifications:
Any modifications made to this device that are not approved by QNAP Systems,
Inc. may void the authority granted to the user by the FCC to operate this
equipment.
This QNAP NAS complies with CE Compliance Class B.
According to the requirement of the WEEE legislation, the following user information is provided to customers for all branded QNAP products subject to the WEEE directive. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.
Printed in Taiwan
P/N: 51000-024679-RS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>