QNAP QMiro-201W AC2200 Next Generation Tri Band Wifi Mesh Router Installation Guide
- June 6, 2024
- QNAP
Table of Contents
QNAP QMiro-201W AC2200 Next Generation Tri Band WIFI Mesh Router Installation Guide
QMiro-201W
Setup your QMiro-201W
The default IP address of QMiro-201W web management is 192.168.100.1
Radio Information for CE
Frequency band(s) in which the radio equipment operates BT:2402MHz-2480MHz
WLAN 2.4G: 2412MHz-2472MHz
WLAN 5G:5150MHz-5850MHz
Maximum tune-up e.i.r.p
BT:7.5dBm
WLAN 2.4GHz:20dBm
RLAN 5GHz(5150MHz-5350MHz, 5470MHz-5725MHz): 30dBm
Fixed broadband data transmitting systems(5725 MHz ~ 5850 MHz):25dBm
Getting Started
Install QNAP Qu Router App, by scanning QR code printed on packaging label, or search for QNAP Qu Router in the Google Play Store or Apple App Store
Getting Started
Download Center www.qnap.com/download
Visit Download Center for our full guides and utilities.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device mayn’t cause harmful
interference, and (2) This device must accept any interference received,
including interference that macaques undesired operation. This equipment has
been tested and complies with the Class B digital device limits, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used according to the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference cannot occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by taking one of the following actions:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. RF
Modules installed in this product must not be co-located or operating in
conjunction with any other antenna or transmitters, except when installed in
accordance with FCC multi-transmitter product guidelines. FCC Radiation
Exposure Statement This equipment complies with FCC radiation exposure limits
set forth for uncontrolled environments. This equipment must be installed and
operated with a minimum distance of 21cm between the radiator/antennas and the
general public
This device complies with CE compliance Class B.
CE Marking
The equipment described in this document faithfully complies with: European
Union Radio Equipment Directive (RED) 2014/53/EU. The Declaration of
Conformity is provided to customers with other technical documents upon
request and is accessible from https://www.qnap.com/en/contact-us/ to
authorized users. Radiation exposure statement This equipment complies with
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 21 cm between
the radiator and your body. For operation within 5.15 ~ 5.35GHz frequency
range, it is restricted to indoor environment. The equipment is stationary,
and fixed to be using in conjunction with the termination of end user terminal
Hereby, QNAP Systems, Inc. declares that the radio equipment type QMiro- 201W/QMiroPlus201W is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.qnap.com
ISED Compliance Statement
Note: Industry Canada has been renamed Innovation, Science, and Economic
Development Canada (ISED) following the issue of RSP-100 Issue 11 and DC-01
Issue 06. Equipment certifications previously issued by Industry Canada remain
valid and do not require updating. Meaning you may see the names used
interchangeably in documentation. The following statement is applicable to
ASiR-pRRH which has Innovation, Science and Economic Development (ISED)
approval: This device complies with ICES-003 of Industry Canada’s license-
exempt RSSs. Operation is subject to the following two conditions
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement
This product comply with IC radiation exposure limits set forth for an
uncontrolled environment. To comply with RSS 102 RF exposure compliance
requirements, a separation distance of at least 21 cm must be maintained
between the antenna of this device and all persons.
The device for the band 5150-5350 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.
According to the requirement of the WEEE legislation the following user information is provided to customers for all branded QNAP Electronics products subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
RED 2014/53/EU Article 10 Compliance
RED 2014/53/EU requires that for products which could potentially have an
issue with a non-harmonized frequency in a specific EU country, the product
documentation must list the restrictions, and the packaging must carry a label
reflecting that country’s code.
EU RoHS statement
This equipment complies with the European Union RoHS Directive 2011/65/EU on
the restriction of the use of certain hazardous substances in electrical and
electronic equipment. The directive applies to the use of lead, mercury,
cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and
polybrominated diphenyl ethers (PBDE) in electrical and electronic equipment.
www.qnap.com/regulatory/
www.qnap.com
service.qnap.com
download.qnap.com
P/N: 51000-024896-RS Made in China
References
- download.qnap.com
- Contact Us | QNAP
- Customer Service - QNAP
- QNAP (US) | Experts in NAS, Networking, and Smart Surveillance
- Download Center | QNAP (US)
- QNAP (US) | Experts in NAS, Networking, and Smart Surveillance
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>