Stadler Form 239716 Peter Little Table Fan User Manual

: June 6, 2024
: Stadler Form

Table of Contents

Description of the appliance
Important safety instructions - SAVE THESE INSTRUCTIONS
Setting up / operation
Cleaning
Repairs
Disposal
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Stadler Form 239716 Peter Little Table Fan User Manual

Operating instructions

READ AND SAVE THESE INSTRUCTIONS

![Stadler Form 239716 Peter Little Table Fan

Overview 2](https://manuals.plus/wp-content/uploads/2021/11/Stadler- Form-239716-Peter-Little-Table-Fan-Overview-2.jpg)

Share your feedback about Peter little on: www.stadlerform.com/Reviews

For frequently asked questions go to: www.stadlerform.com/Peter- little/support

Download instruction manual: www.stadlerform.com/Peter- little/manual

Learn more about the product Peter little: www.stadlerform.com/Peter- little

FB, Twitter, Pinterest, Instagram, YouTube

Stadler Form Aktiengesellschaft, Chamerstrasse 174, 6300 Zug, Switzerland
Phone +41 41 720 48 48, Fax +41 41 720 48 44, www.stadlerform.com/contact

Congratulations! You have just purchased the exceptional PETER little fan. He will give you great pleasure and improve the indoor air for you.

As with all domestic electrical appliances, particular care is needed with this model also, in order to avoid injury, fire damage or damage to the appliance. Please study these operating instructions carefully before using the appliance for the first time and follow the safety advice on the appliance itself.

Description of the appliance

The appliance consists of the following main components:

Network adapter
Connection for network adapter
On/off button
Control panel
Button for the selection of the speed level: 14
Button for swing mode
Button for the selection of “Natural Breeze” mode
Air outlet
Air inlet with washable air filter

Important safety instructions - SAVE THESE INSTRUCTIONS

Please read through the operating instructions carefully before you use the appliance for the first time and keep them safely for later reference; if necessary pass them on to the next owner.

```
*       * Stadler Form refuses all liability for loss or damage which arises as a result of failure to follow these operating instructions.
```
- The appliance is only to be used in the home for the purposes described in these instructions. Unauthorised use and technical modifications to the appliance can lead to danger to life and health.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Never leave any parts of the packing within the reach of children.
- If the supply cord is damaged, it must be replaced by the manufacturer, or its service agent, or a qualified person in order to avoid a hazard.
Never insert objects into the grille of the fan. Do not cover the appliance during operation.
Always disconnect the power cord from the socket before removing the protection grille.
Only connect the cable to alternating current. Observe the voltage information given on the appliance.
Do not use damaged extension cords.
Do not run the power cord over sharp edges and make sure that it does not get trapped.
Do not pull the plug from the socket with wet hands or by holding on to the power cord.
Do not use the appliance in immediate vicinity of a bath tub, a shower or a swimming pool (observe a minimum distance of 3 m). Place the appliance such that a person in the bath tub cannot touch the appliance.
Do not place the appliance near a heat source. Do not subject the power cord to direct heat (such as a heated hotplate, open flames, hot iron sole plates or heaters for example). Protect power cords from oil.
See to it that the appliance is properly positioned to ensure a high stability during its operation and make sure that no one can trip over the power cord.
The appliance is not splash-proof.
For indoor use only.
Do not store the appliance outdoors.
Store the appliance in a dry place inaccessible to children (pack the appliance).
Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug the mains cable from the socket.
Repairs to electrical appliances must only be carried out by a qualified electrical technician.
Only use the adapter provided by the manufacturer.

Setting up / operation

Place Peter little in the desired location on a flat surface. Connect the power adapter (1) to the appliance (2) and insert the adapter into a suitable mains socket.
Switch on the appliance by pressing the On/Off button (3). The appliance gives an audible signal when a setting is changed via the control panel (4).
Press the button for the selection of the speed level (5) to change the fan speed (levels 14). Pressing once increases the speed by one level. If you would like to increase the speed by another level, press again.
Activate swing mode by pressing the swing mode button (6). The appliance now swings at an angle of approx. 70° to ensure optimum distribution of cooling air throughout the room. Press the swing mode button (6) again if the appliance is to remain at a certain angle.
Press the button for the selection of “Natural Breeze” mode (7) for natural wind conditions. The blue LED beneath the button (7) will now light up. This mode provides an even more pleasant cooling effect, simulating a natural breeze. The fan speed of this breeze automatically varies depending on the selected speed level.
Switch off the appliance by pressing the on/off button (3).

Cleaning

Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug the mains cable (1) from the socket.

Attention : Never submerge the appliance in water (danger of short- circuit).

For external cleaning, rub with a damp cloth and then dry thoroughly.
Make sure that the air inlet (9) and air outlet (8) are cleaned regularly to prevent the build-up of dust. The air outlet (8) can be cleaned with a dry brush or a vacuum cleaner. The air inlet screen (9) is fitted with an air filter which can be removed and cleaned with a damp cloth. Remove the filter by removing the screw on the air inlet screen (9). After cleaning, ensure that the air filter is completely dry and that the screw is firmly tightened again.

Repairs

Repairs to electrical appliances must only be carried out by a qualified electrical technician. If improper repairs are carried out, the warranty lapses and all liability is refused.
Never operate the appliance if the adaptor or plug is damaged, after it has malfunctioned, if it has been dropped or has been damaged in any other way (cracks/breaks in the casing).
Do not push any object into the appliance.
If the appliance is beyond repair, make it unusable immediately by cutting through the cable and hand it in at the collection point provided for the purpose.

Disposal

Do not dispose of electrical appliances in the domestic waste. Please use the communal collection points.
Ask your local authority if you do not know where the communal collection points are located.
If electrical appliances are disposed of thoughtlessly, exposure to the elements may cause hazardous substances to find their way into the groundwater and from there into the food chain, or to poison the flora and fauna for many years to come.

Specifications

Rated voltage — DC 24 V
Rated power — 9 W
Dimensions —
Housing: 4.3 x 14.2 inch / 109 x 361 mm (diameter X height)
Foot: 4.6 inch / 117 mm (diameter)
Weight — 2.6 lbs / 1.2 kg
Sound level — 28–54 dB(A)
Complies with regulations — cETL

All rights for any technical modifications are reserved

Stadler Form 239716 Peter Little Table Fan - Retailer’s
stamp Retailer’s stamp

Stadler Form 239716 Peter Little Table Fan - Design by Bernhard &
Burhard Thanks to all people involved in this project: Charly Liu for his engagement and organization, Richard Hu and Danny She for the coordination, Alan Ai and Mr. Li for the main engineering and CAD work, Mario Rothenbühler for the photos, Fabian Bernhard and Thomas Burkard for the cool design, Matti Walker for the graphic work.