Stadler Form S08KXZE87K Roger Little Air Purifier Instruction Manual

Stadler Form S08KXZE87K Roger Little Air Purifier

Congratulations! You have just acquired the exceptional air purifier ROGER/ROGER LITTLE / ROGER BIG. It will give you great pleasure and improve the indoor air for you.
As with all domestic electrical appliances, particular care is also needed with this model in order to avoid injury, fire damage or damage to the appli- ance. Please study these operating instructions carefully before using this appliance for the first time and follow the safety advice on the appliance itself.

Description of the appliance

The appliance consists of the following main components:

1. Textile pre-filter with integrated Sanitized® antimicrobial hygiene function
2. Dual filter (HEPA, Activated Carbon)
3. Housing
4. Mains cable for power supply
5. Connection for mains cable
6. On/off button
7. Air quality indicator
8. Button for the selection of the speed level
9. Button for auto mode
10. Button for timer
11. Button for night mode (air quality indicator in normal mode or switched off)
12. Button for HEPA RESET (Dual Filter-timer und exchange reminder)
13. Button for WiFi (only Roger and Roger big)
14. Air inlet
15. Position of the gas sensor (Roger little), gas and particle sensor (Roger / Roger big)
16. Fan
17. Air outlet
18. Carrying handle

Important safety instructions – SAVE THESE INSTRUCTIONS

Please read through the operating instructions carefully before you use the appliance for the first time and keep them safely for later reference; if necessary pass them on to the next owner.

• Stadler Form refuses all liability for loss or damage which arises as a result of failure to follow these operating instructions.
• The appliance is only to be used in the home for the purposes described in these instructions. Unauthorized use and technical modifications to the appliance can lead to danger to life and health.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Only connect the cable to alternating current. Observe the voltage information given on the appliance.
• Do not use damaged extension cords.
• Do not run the power cord over sharp edges and make sure that it does not get trapped.
• Do not pull the plug from the socket with wet hands or by holding on to the power cord.
• Do not use the appliance in the immediate vicinity of a bathtub, a shower or a swimming pool (observe a minimum distance of 3 m). Place the appliance such that a person in the bathtub cannot touch the appliance.
• Do not place the appliance near a heat source. Do not subject the power cord to direct heat (such as a heated hotplate, open flames, hot iron sole plates or heaters for example). Protect power cords from oil.
• See to it that the appliance is properly positioned to ensure high stability during its operation and make sure that no one can trip over the power cord.
• The appliance is not splash-proof.
• For indoor use only.
• Do not store the appliance outdoors.
• Store the appliance in a dry place inaccessible to children (pack the appliance).
• If the power cord is damaged, it must be replaced by the manufacturer or a repair shop authorized by the manufacturer or by similarly qualified persons in order to avoid a hazard.
• Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug the mains cable from the socket.
• Always disconnect the power cord from the socket before installing or replacing fuses.
• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
• Open fuse cover. Slide open fuse access cover on the top of attachment plug towards blades.
• Remove fuse carefully.
• Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse
• Close fuse cover. Slide closed the fuse access on top of the attachment plug.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

Filter description

Textile Pre-filter (1) The textile pre-filter (1) removes coarse dust particles and dirt from the air. By doing this, it protects the Dual FilterTM and prolongs its service life. The integrated Sanitized® antimicrobial hygiene function protects the textile pre-filter. The textile pre-filter (1) must be cleaned regu-larly, once or twice a month depending on the level of soiling, using the tex-tile brush attachment for your vacuum cleaner. In the case of heavy soiling, the textile pre-filter (1) can also be washed in a washing machine at 30° on a gentle cycle. The Sanitized® antimicrobial material protection is guaranteed for at least 20 washes. Allergy sufferers are recommended to wash the textile pre-filter once a month and all other users every 3 months. Let the textile pre-filter (1) dry completely before attaching it to the appliance again. Sanitized® is the worldwide leading Swiss producer of antimicrobial hygiene function and material protection for textiles and polymers.

Dual filter: HEPA, Activated Carbon (2)

The Dual filter is the heart of the air purifier. It is a combination of a HEPA filter and an Activated Carbon filter.
The HEPA filter part of the Dual FilterTM filters pollutants out of the air, such as fine dust and pollen.
The Activated Carbon filter absorbs gases present in the air (bad odors, to- bacco smoke, formaldehyde, toluene, volatile organic compounds, etc.) and filters them out of the air. The capacity of the Dual FilterTM is limited, which means that it must be replaced every 8–12 months, depending on its exposure to air and gases. Should you notice before eight months has passed that bad odors are no longer being eliminated, this is an indication that the filter needs to be changed.

Setting up / operation

1. Remove the textile pre-filter (1) by taking hold of the top on both sides and pulling it forwards. Take the Dual FilterTM (2) from its housing (3) and remove the plastic film. Set the Dual FilterTM (2) in place so that the two textile tabs are visible on the front side. Arrows on the top of the filter (2) indicate the direction in which the filter must be inserted. Important: Roger big has a textile pre-filter on both sides and a Dual FilterTM, there-fore both Dual FilterTMs must be unpacked and inserted.
2. Refit the textile pre-filter (1) by inserting the positioning aids near the bottom of the textile pre-filter (1) into the notches on the housing (3) and then tilting the textile pre-filter (1) towards the housing until it is locked into place at the top by the magnets on the housing (3). Make sure that the LED cylinder at the front towards the bottom of the appliance is inserted in the hole on the pre-filter.
3. Place Roger/Roger little / Roger big to the desired location on a flat surface, ideally centered in the room. This allows air to be supplied from all sides.
4. Connect the mains cable (4) to its connection (5) on the unit and then to a suitable power outlet.
5. Turn on Roger/Roger little/ Roger big by pressing the on/off button (7). The controls and the display light up in sequence from right to left. If no further buttons are pressed within 10 seconds, the display goes out again. Otherwise, visibility is extended by a further 10 seconds. Pressing the on/off button (6) or the controls lights them back up. To turn Roger/Roger little / Roger big off, press the on/off button (6) for two seconds.
6. Air quality is measured by means of various sensors (Roger / Roger big = gas and particle sensor PM2.5 / Roger little = gas sensor) and is indicated by the air quality indicator (7) in front of the textile pre-filter (1). The blue LED means good air quality. The orange LED shows medium air quality, and the red LED shows poor air quality. If the device is switched on again, the display will light up in orange for the first three minutes. The display then changes to the air quality currently measured (blue, orange or red).
7. You can change the speed level by pressing the button for the selection of the speed level (8) (one LED for level 1, two LEDs for level 2, etc.). Increasing the speed level is useful when the air quality indicator (7) indicates decreasing air quality (blue for good air quality, orange for medium air quality, and red for poor air quality). For optimal air purification, we recommend activating auto mode (9).
8. Pressing the button for auto mode (9) automatically adjusts the speed level to the current air quality (steps 1–4). If the air quality deteriorates, the device automatically selects a higher speed level. The display shows “Auto” when auto mode is activated.
9. By pressing the button for the timer (10) you can set the operating time for between one and seven hours (for example, 3 h = 1 h and 2 h LEDs lit, 7 h = 1 h, 2 h and 4 h LEDs lit). The selected time is displayed above the timer button with white LEDs. Press once to set the operating time to 1 h, press the button again for 2 h, and so on. The remaining time is indicated by the illuminated LEDs above the timer button. The unit switches off automatically after the set operating time has elapsed. If no LEDs are lit above the timer, the unit is set to continuous operation.
10. If you are bothered by the brightness of the LEDs and the air quality indicator (7) (in a bedroom, for example), you can switch these off by pressing the button for night mode (11) once. The controls cannot be switched off completely, but go out automatically after 10 seconds without input. Press the button for night mode again to return to normal mode.
11. Above the button for HEPA reset (12), four LEDs indicate the life span of the Dual filter (2). If all four LEDs are flashing, the Dual FilterTM must be replaced. Reset the timer for the Dual Filter by pressing and holding the button for HEPA reset (12) (for about 3 seconds). If all 4 LEDs light up continuously, the timer has been successfully reset.
12. Press the WiFi button (13) to connect Roger/Roger big to the “Smart Life – Smart Living“ App von Tuya Inc. (available in the App Store and via Google Play) on your smartphone. The illuminated LED above the WiFi button indicates the connection between Roger/Roger big and your smartphone. You can control all the functions of the appliance via the app and monitor the air quality in real time, even when you are not at home. For more detailed information on how to connect your Roger/Roger big to your smartphone, see the enclosed „WiFi – Quick Setup Guide“.

Cleaning and filter exchange

Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug the mains cable (4) from the socket. To access the various filters, please refer to Point 1 of “Setting up / operation”.
Attention: Never submerge the appliance in water (danger of short- circuit).

• When cleaning the outside, rub the non-textile parts of your appliance with a damp cloth and then dry thoroughly.
• The textile pre-filter (1) must be cleaned regularly, once a month depending on the level of soiling, using the textile brush attachment for your vacuum cleaner. In the case of heavy soiling, the textile pre-filter (1) can also be washed in a washing machine. The Sanitized® antimicrobial material protection is guaranteed for at least 20 washes. Allergy sufferers are recommended to wash the textile pre-filter once a month and all other users every 3 months.
• The textile pre-filter will need to be removed from its plastic frame before it can be washed in a washing machine. In order to do that, all the material will need to be removed from the two positioning aids, the two pin, the 4 tabs and the two corner tabs at the top. The textile pre-filter can be washed at 30° on a gentle cycle. Let the textile pre-filter (1) dry completely before attaching it to the appliance again. To do that, stretch the material over the plastic part so that the washing label is at the top and on the inside. All openings in the material to be threaded through are marked with bright-colored thread. In addition, the material should be lifted over the two corner tabs at the top of the appliance. Caution: Never put the textile pre-filter, filter or other parts of the housing in the dishwasher!
• The Dual FilterTM (2) cannot be cleaned and must be replaced after 8–12 months. If all four LEDs flash above the button for HEPA reset (12), the filter must be replaced. Should you notice that bad odors are no longer be-ing released, this is also an indication that the filter needs to be changed. After replacing the filter, reset the timer for the Dual FilterTM by pressing and holding the button for HEPA reset (12) (for about 3 seconds). If all 4 LEDs light up continuously, the timer has been successfully reset.

Repairs

• Repairs to electrical appliances must only be carried out by a qualified electrical technician. If improper repairs are carried out, the warranty lapses, and all liability is refused.
• Never operate the appliance if the adaptor or plug is damaged, after it has malfunctioned, if it has been dropped or has been damaged in any other way (cracks/breaks in the casing).
• Do not push any object into the appliance.
• If the appliance is beyond repair, make it unusable immediately by cutting through the cable and hand it in at the collection point provided for the purpose.

Disposal

• Do not dispose of electrical appliances in the domestic waste. Please use the communal collection points.
• Ask your local authority if you do not know where the communal collection points are located.
• If electrical appliances are disposed of thoughtlessly, exposure to the elements may cause hazardous substances to find their way into the groundwater and from there into the food chain, or to poison the flora and fauna for many years to come.

Specifications Roger

• Rated voltage 100–120 V / 50–60 Hz
• Rated power 4–100 W
• Room size up to 420 sq.ft / 39 m2 with 5x/h air exchange (heavy air pollution and for allergy sufferers) up to 710 sq.ft / 66 m2 with 3x/h air exchange (moderate air pollution/normal use)
• CADR up to 275 cfm/ min / 465 m3/h (Clean Air Delivery Rate according to AHAM)
• Dimensions 16.5 x 20.3 x 7.8 inch / 420 x 516 x 200 mm (width x height x depth)
• Weight 15 lbs / 6.8 kg
• Sound level 28–65 dB(A)
• Complies with regulations cETL

FCC regulation notes (for Roger & Roger big)

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
  interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• To satisfy FCC&IC RF exposure requirements, a separation distance of 7.8 inches/20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer to this distance is not recommended.

Warranty

1-year Limited Warranty

• A. This 1-year limited warranty applies to the repair or replacement of products found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. SWIZZ STYLE IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.
• B. At its option, Swizz Style will repair or replace this product if it is found to be defective in material or workmanship. A defective product should be returned to the place of purchase in accordance with store policy. Thereafter, while within the warranty period purchaser should contact Swizz Style at 1-877-663-7895 Monday – Friday 9 am – 4 pm EST for product return information.
• C. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual.
• D. If the product has replaceable filters, these are not covered under this warranty, except for material or workmanship defects.
• E. The following must accompany all products returned for service: 1) Proof of purchase 2) Brief description of the problem 3) Full contact information (including return shipping address) 4) Check or money order for $10 ($15 if in Canada) for return handling, packaging and shipping charges. All funds are in US dollars.
• F. Swizz Style is not responsible for items lost, stolen or damaged during return shipping.

References

• Stadler Form Review Products | Stadler Form
• Stadler Form USA - Ensuring Your Optimal Indoor Climate

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>