Stadler Form SIMON 3D Air Circulator Instruction Manual

Stadler Form SIMON 3D Air Circulator

Congratulations! You have just purchased the exceptional SIMON 3D air circulator. He will give you great pleasure and improve the indoor air for you. As with all domestic electrical appliances, particular care is needed with this model also, in order to avoid injury, fire damage or damage to the appliance. Please study these operating instructions carefully before using the appliance for the first time and follow the safety advice on the appliance itself.

Description of the appliance

The appliance consists of the following main components:

1. Fixing screw for foot and pole
2. Pole
3. Foot
4. Cable with power adapter
5. Foot-operated switch with On/Off switch
6. On/Off button
7. Button for the selection of the speed level: 1–10
8. Button for vertical swing mode: -5°–85°
9. Button for horizontal swing mode: 60°, 90° or 180°
10. Button for the selection of „Natural Breeze“ mode
11. Button for the selection of timer function: 1–7 h
12. Remote control (radio) (incl. 2 x type AA batteries)
13. Air inlet with removable grille
14. Air outlet with removable grille
15. Fan blade
16. Screw for removing the air outlet grille
17. Knob for fixing the fan blade in place
18. Textile cover
19. Screws for removing the air inlet grille
20. Holes for fixing the textile cover
21. Hole in textile cover for pole
22. Cover plate for textile cover
23. Shaft for fan blade

How your product works

A 3D air circulator optimally circulates both cool and warm air. The vertical and horizontal swing modes of a 3D air circulator distribute the air throughout the whole room. Ideal for summer and winter as it enhances the effectiveness of air-conditioning and heating systems. This device can be set up on the floor.

Important safety instructions

Please read through the operating instructions carefully before you use the appliance for the first time and keep them safely for later reference; if necessary pass them on to the next owner.

• Stadler Form refuses all liability for loss or damage which arises as a result of failure to follow these operating instructions.
• The appliance is only to be used in the home for the purposes described in these instructions. Unauthorized use and technical modifications to the appliance can lead to danger to life and health.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Never leave any parts of the packing within the reach of children.
• If the supply cord is damaged, it must be replaced by the manufacturer, or its service agent, or a qualified person in order to avoid a hazard.
• Assemble the appliance in accordance with the instructions for Assembly. Follow the instructions for assembly exactly and ensure that all screws are firmly tightened so as to avoid damage and hazards.
• Never insert objects into the grille of the fan. Do not cover the appliance during operation.
• Always disconnect the power cord from the socket before removing the protection grille.
• Only connect the cable to the alternating current. Observe the voltage information given on the appliance.
• Do not use damaged extension cords.
• Do not run the power cord over sharp edges and make sure that it does not get trapped.
• Do not pull the plug from the socket with wet hands or by holding on to the power cord.
• Do not use the appliance in the immediate vicinity of a bathtub, a shower, or a swimming pool (observe a minimum distance of 3 m). Place the appliance such that a person in the bathtub cannot touch the appliance.
• Do not place the appliance near a heat source. Do not subject the power cord to direct heat (such as a heated hotplate, open flames, hot iron sole plates, or heaters for example). Protect power cords from oil.
• See to it that the appliance is properly positioned to ensure high stability during its operation and make sure that no one can trip over the power cord.
• The appliance is not splash-proof.
• For indoor use only.
• Do not store the appliance outdoors.
• Store the appliance in a dry place inaccessible to children (pack the appliance).
• Prior to any maintenance, cleaning, and after each use, switch off the appliance and unplug the mains cable from the socket.
• Repairs to electrical appliances must only be carried out by a qualified electrical technician.
• Only use the adapter provided by the manufacturer.

Assembly

Caution: the air inlet and air outlet grilles must be properly sealed before the device is put into operation in order to prevent damage and hazards. Make sure that the 1 screw underneath for the air outlet grille and the 4 screws at the back on the air inlet grille are firmly tightened. Do not plug the mains cable into the socket until you have finished assembling the device.

• Remove the fixing screw (1) from underneath the pole (2).
• Insert the pole (2) into the foot (3) and secure it using the screw (1).
• Finally, push the fan housing onto the top of the pole (2) until you hear the pole click into place.

Note: When the device is used for the first time, the motor will have to align itself first. This can take a couple of seconds.

Setting up / operation

1. Place Simon in the desired location on a flat surface. Connect the cable for the power adapter (4) to the cable for the foot-operated switch (5). Connect the power adapter to a socket with the correct voltage rating.
2. Switch on the appliance by pressing the on/off button (5) on the foot-operated switch (5). The appliance gives an audible signal
3. Press the button for the selection of the speed level (7) to change the fan speed (levels 1–10). Pressing once increases the speed by one level. If you would like to increase the speed by another level, press again. The setting chosen is indicated by the number of LEDs illuminated underneath the on/off button (6) (1 LED for levels 1 + 2, 2 LEDs for levels 3] + 4, 3 LEDs for levels 5 + 6, 4 LEDs for levels 7 + 8 and 5 LEDs for levels 9 + 10).
4. Activate swing mode by pressing the vertical swing mode button (8). The appliance now swings at an angle of approx. -5°–85° to ensure optimum distribution of cooling air throughout the room.
5. Press the swing mode button (8) again if the appliance is to remain at a certain angle.
6. For optimum distribution of cooling air from left to right, activate the horizontal swing function (9). Together with the vertical swing function, this will create 3D air circulation throughout the whole room. There are 3 angle settings to choose from for the horizontal swing function: 60°, 90° or 180°. To select a setting, press the button for the horizontal swing function (9) until the LED underneath your chosen angle setting lights up. If the LED underneath the button (9) is not illuminated, the horizontal swing function is deactivated.
7. Press the button for the selection of “Natural Breeze” mode (10) for natural wind conditions. The white LED above the button (10) will now light up. This mode provides an even more pleasant cooling effect, simulating a natural breeze. The fan speed of this breeze automatically varies depending on the selected speed level.
8. By pressing the button for the timer (11) you can set the operating time to between 1 and 7 hours (for example, 3 h = 1 h and 2 h LEDs lit, 7 h = 1 h, 2 h, and 4 h LEDs lit). The selected time is displayed above the timer  button (11) with white LEDs. Press once to set the operating time to 1 h, press the button again for 2 h, and so on. The remaining time is indicated by the illuminated LEDs above the timer button (11). The unit switches off automatically after the set operating time has elapsed. If no LEDs are lit above the timer button (11), the unit is set to continuous operation.
9. Switch off the appliance by pressing the on/off button (6). Alternatively, you can switch off the device by pressing the foot-operated switch (5). The device has a power memory function that stores the last setting selected.
10. The remote control (12) is magnetically attached to the pole (2) of the device. It operates via radio. The battery compartment is on the back of the remote control (12). Press the cover down to open the battery compartment (2 x type AAA batteries).

Cleaning

Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug the mains cable (4) from the socket.

Attention: Never submerge the appliance in water (danger of short- circuit).

• For external cleaning, rub with a damp cloth and then dry thoroughly.
• Make sure that the air inlet (13) and air outlet (14) are cleaned regularly to prevent the build-up of dust. The air inlet (13) can be cleaned with a dry brush or a vacuum cleaner.
• The air outlet grille (14) can be removed, making the fan blade (15) easy to clean. Before doing so, make sure that the device is disconnected from the mains. First of all, remove the screw (16) underneath on the housing. Then turn the air outlet grille (14) anti-clockwise and remove it. Turn the knob underneath (17) clockwise and remove it. The fan blade (15) can now be taken out of the housing. Clean the fan blade (15) with a damp cloth and a drop of detergent and then dry it thoroughly. Then clean the air outlet grille (14) and dry it carefully.
• The textile cover (18) can be taken off the housing after all four screws (19) have been removed. There are small holes in the textile cover which are fitted over the front and back of the housing (20). The textile cover (18) can be washed at 30° Celsius «(cold wash)» on a gentle cycle. Make sure that the textile cover (18) is completely dry before attaching it to the device again. When fitting the textile cover (18), make sure that the hole in the cover for the pole (21) is in the right place. Now fit the textile cover (18) over the device again by making sure that all the holes (20) line up properly on the front and back of the housing. This will enable the cover plate for the textile cover (22) to be put back correctly on the device. Then push the fan blade (15) back onto the shaft (23) inside the housing first of all and then turn the knob (17) anti-clockwise to tighten it. Attach the air outlet grille (14) by turning it clockwise and tighten all 5 screws (16 & 19) again. It is imperative for the textile cover (18) to be fitted in order for Simon to perform as described.
• Make sure that the air inlet grille (13), the air outlet grille (14), and the fan blade (15) are completely dry and that all the screws (16 & 19) on the housing are firmly tightened before using the device again.

Repairs

• Repairs to electrical appliances must only be carried out by a qualified electrical technician. If improper repairs are carried out, the warranty lapses, and all liability is refused.
• Never operate the appliance if the adaptor or plug is damaged, after it has malfunctioned, if it has been dropped or has been damaged in any other way (cracks/breaks in the casing).
• Do not push any object into the appliance.
• If the appliance is beyond repair, make it unusable immediately by cutting through the cable and handing it in at the collection point provided for the purpose.

Disposal

The European directive 2012 / 19 / CE on Waste Electrical and electronic equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliances.

Specifications

• Rated voltage: 100–240 V / 50/60 Hz
• Rated power: 1.7–28 W
• Dimensions Housing: 276 x 820 x 261 mm
  • (width x height x depth)
• Foot: 298 mm (diameter)
• Weight: 4.6 kg
• Sound level: 25–52 dB(A)

Complies with EU regulations: CE / WEEE / RoHS / EAC / UKCA

This device contains a radio module from Stadler Form Aktiengesellschaft type: WBR3. It operates in the ISM band in the range of 433 MHz with a maximum transmitted power 20 dBm.

For frequently asked questions go to: www.stadlerform.com/Simon/support

All rights for any technical modifications are reserved.

References

• Stadler Form ensures optimal indoor climate
• Contact us | Stadler Form
• Newsletter subscription | Stadler Form
• Stadler Form Review Products | Stadler Form
• Simon | Stadler Form
• Simon | Stadler Form
• Simon | Stadler Form
• Официальный интернет магазин Stadler Form

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>