Stadler Form Leo 3D Air Circulator Instruction Manual

Leo
Operating instructions

Share your feedback about Leo on:

For frequently asked questions go to:

Download the instruction manual:

Watch the video of Leo:

Stadler Form Aktiengesellschaft, Chamerstrasse 174, 6300 Zug, Switzerland
Phone +41 41 720 48 48, Fax +41 41 720 48 44, www.stadlerform.com/contact

Congratulations! You have just purchased the exceptional LEO 3D air circulator. He will give you great pleasure and improve the indoor air for you.

As with all domestic electrical appliances, particular care is needed with this model also, in order to avoid injury, fire damage, or damage to the appliance. Please study these operating instructions carefully before using the appliance for the first time and follow the safety advice on the appliance itself.

Description of the appliance

The appliance consists of the following main components:

1. Carrying handle
2. Network adapter
3. Connection for the network adapter
4. On/off button
5. Button for the selection of the speed level: 1–4
6. Button for vertical swing mode: -5° – 85°
7. Button for horizontal swing mode: 60°, 90°, or 180° 8. Button for the selection of „Natural Breeze“ mode
8. Button for the selection of timer function: 1–7 h
9. Remote control
10. Infrared receiver
11. Battery compartment remote control (type CR2032)
12. Air inlet
13. Air outlet with removable grille
14. Fan blade
15. Screw for removing the air outlet grille
16. Knob for fixing the fan blade in place
17. Mounting shaft for fan blade

How your product works

A 3D air circulator optimally circulates both cool and warm air. The vertical and horizontal swing modes of a 3D air circulator distribute the air throughout the whole room. Ideal for summer and winter as it enhances the effectiveness of air-conditioning and heating systems. This device can be set up on a table or on the floor.

Important safety instructions

Please read through the operating instructions carefully before you use the appliance for the first time and keep them safely for later reference; if necessary pass them on to the next owner.

• Stadler Form refuses all liability for loss or damage which arises as a result of failure to follow these operating instructions.

• The appliance is only to be used in the home for the purposes described in these instructions. Unauthorized use and technical modifications to the appliance can lead to danger to life and health.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or in- instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.  Cleaning and user maintenance shall not be made by children without supervision.

• Never leave any parts of the packing within the reach of children.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a qualified person in order to avoid a hazard.

• Assemble the appliance in accordance with the instructions for Assembly.
  Follow the instructions for assembly exactly and ensure that all screws are firmly tightened so as to avoid damage and hazards.

• Never insert objects into the grille of the fan. Do not cover the appliance during operation.

• Always disconnect the power cord from the socket before removing the protection grille.

• Only connect the cable to alternating current. Observe the voltage information given on the appliance.

• Do not use damaged extension cords.

• Do not run the power cord over sharp edges and make sure that it does not get trapped.

• Do not pull the plug from the socket with et hands or by holding on to the power cord.

• Do not use the appliance in the immediate vicinity of a bathtub, a shower, or a swimming pool (observe a minimum distance of m). Place the appliance such that a person in the bathtub cannot touch the appliance.

• Do not place the appliance near a heat source. Do not subject the power cord to direct heat (such as a heated hotplate, open flames, hot iron sole plates, or heaters for example). Protect power cords from oil.

• See to it that the appliance is properly positioned to ensure high stability during its operation and make sure that no one can trip over the power cord.

• The appliance is not splash-proof.

• For indoor use only.

• Do not store the appliance outdoors.

• Store the appliance in a dry place inaccessible to children (pack the appliance).

• Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug the mains cable from the socket.

• Repairs to electrical appliances must only be carried out by a qualified electrical technician.

• Only use the adapter provided by the manufacturer.

Setting up / operation

1. To pick up Leo, push the carrying handle (1) upwards. Place Leo in the desired location on a flat surface. Connect the power adapter (2) to the appliance (3) and insert the adapter into a suitable mains socket.
2. Switch on the appliance by pressing the on/off button (4). The appliance gives an audible signal when a setting is changed via the control panel.
3. Press the button for the selection of the speed level (5) to change the fan speed (levels 1–4). Pressing once increases the speed by one level. If you would like to increase the speed by another level, press again. The setting chosen is indicated by the number of LEDs illuminated underneath the button (5).
4. Activate swing mode by pressing the vertical swing mode button (6). The appliance now swings at an angle of approx. -5°–85° to ensure optimum distribution of cooling air throughout the room. Press the wing mode button (6) again if the appliance is to remain at a certain angle. When the vertical swing function is activated, the LED underneath the button (6) will light up.
5. For optimum distribution of cooling air from left to right, activate the horizontal swing function (7). Together with the vertical swing function, this will create 3D air circulation throughout the whole room. There are 3 angle settings to choose from for the horizontal swing function: 60°, 90°, or 180°. To select a setting, press the button for the horizontal swing function (7) until the LED underneath your chosen angle setting lights up. If the LED underneath the button (7) is not illuminated, the horizontal swing function is deactivated.
6. Press the button for the selection of “Natural Breeze” mode (8) for natural wind conditions. The blue LED beneath the button (8) will now light up. This mode provides an even more pleasant cooling effect, simulating a natural breeze. The fan speed of this breeze automatically varies depending on the selected speed level.
7. By pressing the button for the timer (9) you can set the operating time to between 1 and 7 hours (for example, 3 h = 1 h and 2 h LEDs lit, 7 h = 1  h, 2 h, and 4 h LEDs lit). The selected time is displayed below the timer button (9) with blue LEDs. Press once to set the operating time to 1 h, press the button again for 2  h, and so on. The remaining time is indicated by the illuminated LEDs below the timer button (9). The unit switches off automatically after the set operating time has elapsed. If no LEDs are lit below the timer button (9), the unit is set to continuous operation.
8. Switch off the appliance by pressing the on/off button (4).
9. The remote control (10) is magnetically attached to the right-hand side of the device. It operates via infrared – for this purpose, point the remote control at the infrared receiver (11) on the front of the unit. The battery compartment (12) is on the back of the remote control (10). Press the safety slider first of all and then pull down to open the battery compartment.

Cleaning
Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug the mains cable (3) from the socket.

Attention: Never submerge the appliance in water (danger of short- circuit).

• For external cleaning, rub with a damp cloth and then dry thoroughly.
• Make sure that the air inlet (13) and air outlet (14) are cleaned regularly to prevent the build-up of dust. The air inlet (13) can be cleaned with a dry brush or a vacuum cleaner.
• The air outlet grille (14) can be removed, making the fan blade (15) easy to clean. Before doing so, make sure that the device is disconnected from the mains. Gently turn the housing to a vertical position (see photo on page 6). First of all, remove the screw (16) underneath the housing. Then turn the grille (14) anti-clockwise and remove it. Turn the knob underneath (17) clockwise and remove it. The fan blade (15) can now be taken out of the housing. Clean the fan blade (15) with a damp cloth and a drop of detergent and then dry it thoroughly. Then clean the air outlet grille (14) and dry it carefully. Now push the fan blade (15) back onto the shaft (18) in the housing, first of all, then tighten the knob (17) by turning it anti-clockwise, replace the grille (14), and finally, tighten the screw (16) back up again. Make sure that the grille (14) and the fan blade (15) are completely dry and that the screw (16) underneath the housing is firmly tightened before using the device again.

Repairs

• Repairs to electrical appliances must only be carried out by a qualified electrical technician. If improper repairs are carried out, the warranty lapses, and all liability is refused.
• Never operate the appliance if the adaptor or plug is damaged, after it has malfunctioned, if it has been dropped or has been damaged in any other way (cracks/breaks in the casing).
• Do not push any object into the appliance.
• If the appliance is beyond repair, make it unusable immediately by cutting through the cable and handing it in at the collection point provided for the purpose.

Disposal

The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliances.

Specifications

Rated voltage
Rated power
Dimensions
Weight
Sound level
Complies with EU
regulations| 100–240 V / 50 Hz
1.5–18 W
240 x 330 x 205 mm(width x height x depth)
1.7 kg
27–57 dB(A)
CE / WEEE / RoHS / EAC
---|---

All rights for any technical modifications are reserved

2 Years warranty
This warranty covers defects in construction, manufacturing, and material.
Excluded are all wearing parts and improper usage, or consequential damages due to lack of cleaning and/or descaling of the appliance.

Retailer’s stamp /Stempel Verkaufsstelle /

Thanks to all people involved in this project: Charly Liu for his engagement and organization, Joey Yang, Fidel Fu, and Danny She for the coordination, Alan Ai and Mr. Li for the main engineering and CAD work, Mario Rothenbühler for the photos, Fabian Bernhard and Thomas Burkard for the cool design.
Martin Stadler, CEO Stadler Form ktiengesellschaft

www.stadlerform.com

References

• Stadler Form ensures optimal indoor climate
• Contact us | Stadler Form
• Stadler Form Review Products | Stadler Form
• Официальный интернет магазин Stadler Form

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>