SW-MOTECH BC.HTA.41.983.30000-B Side Case Instruction Manual
- June 3, 2024
- SW-MOTECH
Table of Contents
SW-MOTECH BC.HTA.41.983.30000-B Side Case
HTA.41.983.10000
HTA.41.983.11000
BC.HTA.00.677.10000L/B
BC.HTA.00.677.10000R/B
MOUNTING INSTRUCTIONS
READ AND SAVE THESE MOUNTING INSTRUCTIONS
Art.-Nr. / Item No.: HTA.41.983.10000 & HTA.41.983.11000
SLC side carrier
Thank you for choosing this premium product from SW-MOTECH. Please carefully
read and understand all instructions, safety messages and warnings in this
mounting instructions prior to installation and use of this product to avoid
injury.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Visit ourwebshop for additional information, such as
application charts and PDF mounting instructions. Any other documents that may
be required (e.g. ABE certifications), are also available for download at our
web shop. Keep these mounting instructions as reference.
SW-MOTECH assumes no liability for damage caused by improper installation
and/or maintenance work!
SAFETY ALERT SYMBOL
This safety alert symbol is used throughout these mounting instructions to
warn of the possibility of death, bodily injury or other warnings. The words
DANGER, WARNING and CAUTION are used with this safety alert symbol to convey
important safety messages and information related to the installation and use
of this product. These words along with the safety alert symbol mean:
DANGER: Indicates a hazardous situation that, if not avoided, will result in
death or serious injury!
WARNING: Indicates a hazardous situation that, if not avoided, could
result in death or serious injury!
CAUTION: Indicates a hazardous situation that, if not avoided, could result
in minor or moderate injury! &
NOTICE : Important information, but not death or injury related (property
damage only)!
WARNING: The installation and/or maintenance of this product requires
advanced mechanical skills, the proper tools, and a thorough understanding of
tool use and torque specifications. For your own safety, SW-MOTECH recommends
having installation and/or maintenance carried out by a qualified and
certified motorcycle mechanic.
WARNING: Should you choose to self-install this product, carefully and
completely read all installation and safety instructions before installation
and use, and follow all the directions and safety precautions given in the
mounting instructions to avoid serious injury or death. Also pay attention to
all relevant information in the vehicle manual during installation and use.
IF YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS, OR NEED
CLARIFICATION OF ANY INSTRUCTION, DO NOT ATTEMT TO MOUNT THIS PRODUCT
WITHOUT CONTACTING SW-MOTECH FOR ASSISTANCE. PREPARATION: Read the mounting
instructions carefully and make sure that all items of the parts list are
included.
CAUTION: Make sure that your vehicle is parked safely and cannot fall
over. Turn off the engine and remove the ignition key. Let the
engine/exhaust cool off if necessary. Disconnect the vehicle battery when
working on the electrical system. Use appropriate tools and wear always safety
glasses and hand protection. Have another person help you.
MOUNTING: All parts and connections removed from the vehicle must be
reinstalled in accordance with the vehicle manufacturer specifications or
replaced by parts and hardware delivered by SW-MOTECH.
WARNING: Secure all threads, unless otherwise specified, with medium strong
strength liquid thread locker. Torque specifications undefined by SW-MOTECH
must be obtained from the vehicle manufacturer or by a certified motorcycle
workshop!
FUNCT ON CHECK: After installation also make sure that no moving parts are
obstructed, and function of the vehicle is not hindered in any way. Cables and
hoses must not rub and/or be pinched.
WARNING: Before starting to ride, perform a comprehensive check of all
functions. After the first 50 km and then at regular intervals, check the
tightening torque of all connections and the proper fit of the product.
Installed accessories can change driving behavior/stability of the vehicle.
PARTS LIST
READ AND SAVE THESE MOUNTING INSTRUCTIONS
Step| No.| Item No,/ Description a| Part| Quantity b|
N.m c
---|---|---|---|---|---
| | HTA.41.983.10000| SLC Side Carrier left| |
| (1)| HTA.41.983.901.01| Spacer; height 12 mm| 1/1|
| (2)| HTA.00.152.080| Guide Bolt| 3/3|
| (3)| HTA.00.152.081| Lock Bolt| 1/1|
| (4)| M6 x 20; DIN 6912| Hexagon Socket Screw, short head| 1/1| 8
| (5)| M6 x 20; DIN 7991| Countersunk Screw; black| 2/2| 8
| (6)| M8 x 100; DIN 6912| Hexagon Socket Screw, short head| 1/1| 20
| (7)| 0 8,4; DIN 125| Washer; black| 1/2|
| (8)| 0 16 / 0 8,5 / h 17| Spacer; height 17 mm| 1/1| 20
| (9)| M8x85;DIN912| Hexagon Socket Screw| 1/1|
| (10)| 0 8,4; DIN 125| Washer; black| 1/2|
| (11)| 016/08,4/h12| | 1/1|
| | HTA.41.983.10000| SLC Side Carrier; right| |
| (1)| HTA.41.983.902.01| Side Carrier; right| 1/1|
| | | Mounting parts see SLC Side Carrier left| |
Note: a All measurements in millimeters. b The second number indicates
the total quantity of the part in the delivery.
c No torque specifications: Use the torque defined by vehicle manufacturer!
The standard torque in this table can be used as long as it is within the
vehicle manufacturer’s specifications.
MOUNTING
READ AND SAVE THESE MOUNTING INSTRUCTIONS
WARNING: Always wear eye and hand protection!
WARNING: Always use appropriate tools!
NOTICE: The following mounting steps show the mounting of the left side
carrier. Mount the right side carrier in the same way.
Attach the parts (2) to (5) to the side carrier (1).
WARNING: Use liquid thread locker!
Tighten the screws as specified.
Remove the original screws from the mounting points.
Attach the side carrier (1) to the vehicle.
WARNING: Use liquid thread locker!
Tighten the screws as specified.
PRODUCT SPECIFIC INFORMATION
**_NOTICE:**_ Observe the country-specific regulations concerning vehicle registration/operation as well as TUV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority
MOUNTING INSTRUCTIONS
Art.-Nr. / Item No.: siehe Stiickliste / see parts list
URBAN ABS side case
Thank you for choosing this premium product from SW-MOTECH.
Please visit ourwebshop for additional information, such as application charts
and PDF mounting instructions. Any other documents that may be required (e.g.
ABE certifications), are also available for download at our webshop.
Installation and / or maintenance of this product require good technical
understanding! For your own safety SW-MOTECH recommends having installation
and / or servicing carried out by a specialist workshop!
SW-MOTECH assumes no liability for damage caused by improper installation and/
or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay
attention to all relevant information in the vehicle manual during assembly.
Nonconformance can lead to vehicle damage or even endanger the driver!
These mounting instructions are written based on our current state of
knowledge. Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers” accessory
parts is not guaranteed. Furthermore, BEFORE installing this product, make
sure that all moving parts (e.g. the chain) are in the original state of
maintenance.
Installed accessories can change the driving behavior and/ or stability of
your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration /
operation as well as TUY regulations if applicable. If required, register
installed parts in the vehicle documents through an appropriate inspection
authority.
PREPARATION: Read the mounting instructions carefully and make sure that
all items of the parts list are included. Make sure that your vehicle is
parked safely and cannot fall over. Turn off the engine and remove the
ignition key.
Let the motor/ exhaust cool off if necessary. Disconnect the vehicle battery
when working on the electrical system. Use appropriate tools. Have another
person to help you.
FUNCTION CHECK: This is a universal product. For this reason make sure
BEFORE the first use, that the product can be fixed properly and used without
problems with your vehicle type. After fixation also make sure that no moving
parts are obstructed and the function of the vehicle is not hindered in any
way.
Lamps as taillight and turn signals must not be limited in their function.
Cables and hoses must not rub and/or be pinched. Before starting to ride,
perform a comprehensive check of all functions.
PRODUCT SPECIFIC INFORMATION
ATTENTION: Riding with this product may affect the motorcycles driving
and braking performance!
ATTENTION: Depending on the location of fixation, cornering and ground
clearance can be reduced by using this product!
ATTENTION: Before riding and at each stop (every 200 km) check proper
fixation of the product!
ATTENTION: The maximum vehicle load specified by the manufacturer must
not be exceeded!
PARTS LIST
Step| No.| Item No./ Description*| Part| Quantity|
*N.m
---|---|---|---|---|---
| | BC.HTA.00.677.10000L/B| URBN ABS Side case left| ****|
|
(1)
| BC.HTA.00.677.10000L/B| URBAN ABS Side Case left| 1/1|
|
(2)
| BC.LOC.00.001.10200/B| Lock for Motorcycle Luggage| 1/1|
|
(3)
| BC.ZU B.00.064.30000| Waterproof Inner Bag| 1/1|
| | BC.HTA.00.677.10000R/B| URBN ABS Side case right| |
|
(1)
| BC.HTA.00.677.10000R/B| URBN ABS Side case right| 1/1|
|
(2)
| BC.LOC.00.001.10200/B| Lock for Motorcycle Luggage| 1/1|
|
(3)
| BC.ZU B.00.064.30000| Waterproof Inner Bag| 1/1|
* All measurements in millimeters.
** The second number indicates the total quantity of the part in the
delivery.
*** No torque specifications: Use the torque defined by vehicle manufacture
‘! The standard torque in this table can be used as long as it is within the
vehicle manufacturer’s specifications.
Care
To clean the side case, use warm, soapy water and a soft, clean cloth. Rinse
with clean water. Do NOT use strong cleaning agents, rough cleaning tools or
high pressure washer!
Clean the side case after riding in salty conditions, to avoid damage from
salt.
Hard to open zippers can be loosened with a small amount of talcum powder.
ATTENTION: Surface materials can experience color changes or fading when exposed to direct sunlight for extended periods of time and by environmental factors (e.g., SMOG, acid rain, etc.)! SW-MOTECH assumes no liability for this.
MOUNTING
Place the three locking openings of the side case onto the guide bolts of the
mounted SLC side carrier. Then press the side case slightly downward, until it
properly rests on the SLC side carrier.
ATTENTION: Make sure that all three guide bolts engage at the same time!
Pay attention to the clearly audible snap sound of the locking mechanism and
that the red marking under the slider is not visible!
To release press the slider downward.
ATTENTION: All components of the side case must not contact any hot or moving parts of the vehicle! All parts should also remain 5 cm away from hot parts of the vehicle and remain clear of the exhaust stream! After mounting, make sure there are no clearance issues while the suspension is both compressed and extended.
Open the mounted side case (1) to protect it against theft.
Now press the locking button and turn it according to the arrow mark until the
locking button engages.
Then lock the closed zipper with the included lock (2)
We recommend leaving the locking button in the closed position during the
ride.
Use the included waterproof inner bag (3) to protect your luggage from
moisture.
For an easier loading of the side case (11). open the buckles and hook and
loop fasteners of the opening reductions, as shown in the drawing.
ATTENTION: Make sure weight is evenly distributed between the left and
right side if you want to use both side cases! Make sure that the loading is
secured against shifting during the ride!
ATTENTION: Never store pointy or sharp-edged objects, which could cause
injury to persons or damage to the vehicle/side case!
SW-MOTECH GmbH & Co. KG
Ernteweg 8/10
35282 Rauschenberg
Germany
Tel./ phone+ 49 (0)6425 / 8168 – 050
Fax/ fax+ 49 (0)6425 / 8168 – 10
info@sw-motech.com
www.sw-motech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>