AGPTEK H7 Car LED Bulbs with IP68 Water Resistant User Manual
- June 6, 2024
- AGPTEK
Table of Contents
H7 CAR LED BULBS
User Manual
Specifications
| Model | H7 |
|---|---|
| Watt/Voltage | 30W/12V |
| Application | For car & motorbike |
| Bulb base | PX26d |
Important Tips
- During installation, do not touch the LED chipset.
- When replacing, please replace a pair of LED bulbs at the same time to ensure the best lighting effect and driving safety.
- If you find that the car lights’ brightness is dim, please replace them with new high-quality lights in time. This product has passed ECE certification and complies with EU applicable laws on road traffic. If you have any problems with this product, please feel free to contact us at support@agptek.com.
Installation
-
Open the hood, and then open the dust cover.
-
Find and remove the original halogen bulbs. 1
-
Move out the chuck of the LED bulb.
-
Install the LED chuck into the pedestal.
-
Install the LED bulb and adjust its position.
-
Connect the plug to the original car lamp connector. Then, fixed dust cover.
IMPORTANT NOTE: When you plug the bulbs into the socket but do not light up, just rotate the plug 180 degrees and then insert it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>