rotronic HygroClip2 Advanced Leading-Edge Probe Instruction Manual
- June 5, 2024
- ROTRONIC
Table of Contents
rotronic HygroClip2 Advanced Leading- Edge Probe
GENERAL DESCRIPTION
Your Rotronic HygroClip2 Advanced is a lead-ing-edge product that meets all established standards. It will work perfectly for years if you follow the assembly and operating guidelines below.
CONNECTION
Plug the HygroClip on the mating connector of the transmitter or connection cable. Make sure that the catches are aligned correctly. Tighten the knurled nut by hand.Only a properly assembled and fixed connection assures the IP protection rating. The HygroClip2 Advanced is compatible with the following rotronic products:
- Handhelds of the HP3x family
- Transmitter of the HF5 and HF8 families
MOUNTING
The probe should be immersed in the climate that is to be measured.
ADJUSTEMENT / CALIBRATION
The probes are adjusted in the factory before delivery. We recommend, depend- ing on the application, a calibration after 1 year of use. We provide calibration and adjustment services or you can do this yourselves on-site with the Rotronic SCS humidity standards or our humidity generators HG2-S. Further information regarding calibration and adjustment can be obtained at www.rotronic.com, www.processsensing.com or by contacting us or one of representants.
TECHNICAL DATA
Device type | HygroClip2 Advanced |
---|---|
Operating humidity | HC2A-Sxx 0…100 %rh |
HC2A-S3A 0…100 %rh
HC2A-Sxx-HH 0…100 %rh
Operating temperature| HC2A-Sxx -50…100 °C
HC2A-S3A -50…80 °C HC2A-Sxx-HH 0…60 °C
Accuracy @ 23°C| ±0.8 %rh ( ±0.5% for HC2A-SxH)
±0.1 K
Supply voltage| 3.3…5 VDC
Current consumption| Approx. 5 mA (adjusted at 3.3 VDC)
Load| >10 kW
Cable length| Max 5 m
Protection rating| IP65 (except the sensor area)
Analog outputs| 2x 0…1 V
Digital communication| UART
References
- 12.1085.0105D12.1085.0105ERotronic.comRotronic.comProcessSensing.comProcessSensing.com
- 12.1085.0105F12.1085.0105IRotronic.comRotronic.comProcessSensing.comProcessSensing.com
- Measurement Solutions - Humidity, Temperature, CO2 and Differential Pressure Measurement (EN_US)