rotronic Filter Selection Guide User Guide
- June 15, 2024
- ROTRONIC
Table of Contents
Filter Selection Guide
User Guide
Filter Selection Guide
| | | | | | |
---|---|---|---|---|---|---|---
Applikation| Detail description| PE-Filter 40µm| PTFE-Filter 10µm| PTFE-Filter
2µm| Wire mesh Filter 10µm| Wire mesh Filter 15/25µm| PE-Filter 2µm
Building automation without condensation| Normal application| ✓| | | | |
Office| Normal application| ✓| | | | |
Laboratory in general| Normal application| ✓| | | | |
Chemistry| Normal application| | ✓| | | |
Chemistry| Waterproofness required| | | ✓| | |
Meteorology| In weather hut / normal environment| | | | ✓| |
Meteorology| In weather hut/ fine dust| | | | | | ✓
High humidity with condensation| Normal application| | | | ✓| |
High humidity with condensation| Corrosive environment / polluted air| | ✓| |
| |
Fine dust| Greater than 10µm particles| | ✓| | | |
Fine dust| Greater than 2µm particles| | | | | | ✓
Fine dust| Greater than 1µm particles| | | ✓| | |
Drying processes| <= 100 °C / without fine dust| | | | ✓| |
Drying processes| <= 100 °C / with fine dust| | | | | | ✓
Drying processes| <= 200 °C / without fine dust| | | | ✓ Metal carrier| |
Drying processes| <= 200 °C / with fine dust / larger than 10µm particles| | ✓
Metal carrier| | | |
Drying processes| <= 200 °C / with fine dust| | | ✓ Metal carrier| | |
HVAC| Standard| ✓| | | | |
HVAC| Speed >30m/s or abrasive flow| | | | | ✓|
Abrasive parts in the air flow| Normal application| | | | | ✓|
Greenhouse| Normal application| ✓| | | | |
Storage without condensation| Normal application| ✓| | | | |
Bearing without condensation| With fine dust| | | | | | ✓
Warehouse without condensation| | ✓| | | | |
Forwarding halls| With fine dust| | | | | | ✓
Medical clean rooms| Normal application| | ✓| | | |
Medical clean rooms| With wipe cleaning| | | ✓| | |
Flour production| Dry / fine dust| | | | | | ✓
Flour production| Humid environment (short-term)| | | ✓| | |
Paint shop| With solvent| | | ✓| | |
Paint shop| Water-soluble paints| | | | | | ✓
Climatic chambers 180 °C| Normal application| | | | ✓ Metal carrier| |
High temperature applications| < 200 °C general| | | | ✓ Metal carrier| |
High-temperature applications| < 200 °C fine dust| | ✓ Metal carrier| | | |
High temperature applications| < 200 °C abrasive environment| | | | | ✓|
Agricultural applications| Normal application| | | ✓| | |
Maritime applications (buoys, etc..)| Normal application| | | | | ✓|
! Please note that this filter selection guide is for general guidance only, based on typical use cases. Rotronic/PST assumes no liability for the selection and use of filters based on this guide. Always consult Rotronic’s official product documentation or PST’s support team for comprehensive specifications.
rotronic.com
ProcessSensing.com
References
- One moment, please...
- Measurement Solutions - Humidity, Temperature, CO2 and Differential Pressure Measurement (EN_US)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>