KSPEAKER K2 Bluetooth 3 Inch Weather Rates Speaker and Amplifier System User Manual

KSPEAKER K2 Bluetooth 3 Inch Weather Rates Speaker and Amplifier System

Specifications

• Model: XYZ-2000
• Power: 120V, 60Hz, 800W
• Capacity: 1.5 liters
• Material: Stainless steel
• Dimensions: 10 x 12 x 8 inches

Product Information

• The XYZ-2000 is a high-quality electric kettle designed for convenient boiling of water. With a sleek stainless steel design and a capacity of 1.5 liters, this kettle is perfect for home or office use.
• The powerful 800W heating element ensures quick boiling, saving you time and energy.

Usage Instructions

Initial Setup

Before first use, make sure to remove all packaging materials and stickers from the kettle. Fill the kettle with water up to the maximum level indicated.

Boiling Water

• Place the kettle on the base and plug it into a power outlet.
• Press the power button to start the boiling process. The kettle will automatically shut off once the water reaches boiling point.

Pouring and Serving

Once the water is boiled, carefully pour it using the spout into your cup or teapot. The ergonomic handle ensures a comfortable grip for easy serving.

Cleaning and Maintenance

After each use, unplug the kettle and allow it to cool down.
Clean the interior with a mild detergent and rinse thoroughly. Wipe the exterior with a damp cloth to keep it looking new.

Frequently Asked Questions

Q: Is the kettle cordless?

A: No, the XYZ-2000 electric kettle has a cord that connects to the base for power.

Q: Can I boil liquids other than water in this kettle?

A: It is recommended to only boil water in the XYZ-2000 kettle to maintain its performance and longevity.

Features

• The K2 is a motorcycle sound system that needs to be connected to the motorcycle’s battery for power.
• The speaker can play music from your phone once connected via Bluetooth, you can also listen to radio stations with an FM signal and play songs from your USB flash drive.

What’s in the box

• Please check whether the accessories are complete after receiving the goods.

Wiring

• First, the red end of the power cord is connected to the positive battery of the power supply, while the black end is connected to the negative. Then connect the power cord to the host.
• The audio wiring should not be close to the high-voltage package and spark plug.

Instructions

1. Power
   • Short press to turn on, long press for about 2 seconds to shut down.
   • In the power on state and in radio mode, short press to mute, and then short press to unmute; In Bluetooth/USB mode, short press to pause and short press again to unlock the pause.
2. Prev
   • Short press to reduce the volume. In radio mode, long press to search for stations at the low end; In Bluetooth/USB mode, long press up to select music.
3. Display
   • Displays the current audio rate and current playback information.
4. Next
   • Short press to increase the volume. Long press in radio mode to search for stations, and long press in Bluetooth/USB mode to select music.
5. Mode
   • Short press in the power-on state to switch radio/Bluetooth/USB mode.
6. USB Port
   • Insert U disk, and automatically play songs in MP3/WAV/WMA/FLAC format.
7. Bluetooth connection
   • To pair the Bluetooth devices and connect them to the K2 input, short press the mode to switch to Bluetooth mode and voice prompt “Bluetooth” with displays “BT” on the display screen and flashes.
   • Then turn on the Bluetooth function of the phone, search for the Bluetooth device “K2-SPEAKER”, and click on the successful connection with a tone, at the same time, the display screen shows “BT” permanently on, indicating that the Bluetooth connection is successful. You can open the mobile music player software to play music.

Installation

1. Remove the “mounting bracket first.
2. Align the audio to the desired position on the handlebar, then mark it using a marking pen.
3. Attach the “mounting bracket” to the marked spot.
4. Connect the stereo to the “mounting bracket” and tighten the hexagon nuts.
5. Adjust audio orientation by loosening 6pcs screws on each side, then re-lock for stability.
6. Turn the main body to adjust the visual orientation.

Technical Parameters

• Operating voltage —10V-16V
• Standby current ————-<2mA
• THD- ————————–< 1%
• S/N- ————————–> 85dB
• Frequency response ———————-50Hz-15KHz
• FM radio frequency range- ————————-87.5-108MHz
• Bluetooth connection distance- —————————–> 15m

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body: Use only the supplied antenna.

• www.kspekaer.com
• If you have any issues or are unsatisfied with the product, please contact us at VIP@KSPEAKER.COM
• Unauthorized returns without prior contact will not be eligible for a refund.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>