ANKER A2625121 PowerPort PD+ 2 Charger User Manual
- June 6, 2024
- Anker
Table of Contents
ANKER A2625121 PowerPort PD+ 2 Charger
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
Attention
- The product is designed for use with IT equipment only.
- The maximum ambient temperature during use of the appliance must not exceed 40°C.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug or appliance coupler.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, please use only a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone:
+1 800 988 7973
This device complies with Industry Canada license-ICES-003.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB- 003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2626 is in
compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC &
2019/1782/EU. The full text of the EU declaration of conformity is available
at the following internet address: https://www.anker.com
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3-5, 80807 Munich,
Germany
Anker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings
Road, Tyseley, Birmingham, B11 2AA, United Kingdom
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2626 is in
compliance with Electrical Equipment (Safety) Regulations 2016 &
Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010.
The full text of the GB declaration of conformity is available at the
following internet address: https://www.anker.com
- EN: Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
support@anker.com
(US) +1 (800) 988 7973 Mon – Fri 9:00am – 5:00pm (PT)
(UK) +44 (0) 1604 936200 Mon – Fri 6:00 – 11:00 (GMT)
(DE) +49 (0) 69 9579 7960 Mo – Fr 6:00 – 11:00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>