StarTech DK30C2DPEP USB-C and USB-A Dock Hybrid Universal Laptop Docking Station User Guide

Dual-4K Universal Docking Station – USB-C / USB 3.0 – DisplayPort & HDMI – 100W PD 3.0
Product Diagram (DK30C2DPEP/DK30C2DPEPUE)
Quick-Start Guide

| Port| Function
---|---|---
1.| USB-A Charge Port| • Connect a USB-A Peripheral or charge a Mobile Device
• USB 3.1 Gen 1
• Transmits power and/or data
• Supports BC1.2 5V/1.5A (7.5W) charging
2.| USB-C Charge Port| • Connect a USB-C Peripheral or charge a Mobile Device
• USB 3.1 Gen 1
• Transmits power and/or data
• Supports BC1.2 5V/3A (15W) charging
3.| Audio Input/Output Port| • Connect a Headset or Speakers for audio input/output
• 3.5 mm 4-position headset audio jack
4.| Power Button| • Power the Docking Station on and off
• Integrated LED Indicator is illuminated white when the Docking Station is powered on
5.| DC Power Input Port| • Connect the Universal Power Adapter to supply power to the Docking Station
• Type-N barrel connector
• 19.5V 7.7A
6.| USB-C Host Port| • Connect to a USB-A or USB-C Port on a Host Laptop using the USB-C Cable (with Attached USB-C to USB-A Adapter)
• USB 3.1 Gen 1
• Power Delivery 3.0 Specification
7.| Video 1 DisplayPort

Port

| • Connect a DisplayPort Enabled Display Device
• DisplayPort Version 1.2
8.| Video 1 HDMI Port| • Connect an HDMI Enabled Display Device
• HDMI Version 2.0
9.| Video 2 DisplayPort Port| • Connect a second DisplayPort Enabled Display Device
• DisplayPort Version 1.2
10.| Video 2 HDMI Port| • Connect a second HDMI Enabled Display Device
• HDMI Version 2.0
11.| Ethernet Port| • Connect a CAT 5e/CAT 6 Cable to establish a network connection
12.| USB-A Peripheral Ports| • Connect two USB-A Peripherals
• USB 3.1 Gen 1
13.| Mounting Holes| • Mount the Docking Station to the underside of a Desk or to a Wall
14.| Lock Slot| • Connect a K-Slot Style Locking Device
• Deter the theft of your Docking Station

Requirements

Depending on your Host Laptop’s operating system, the required drivers will automatically be installed when the Docking Station is connected and powered on. For the latest drivers, requirements, instructions, and to view the full manual please visit: www.startech.com/DK30C2DPEP or www.startech.com/DK30C2DPEPUE.
Note: If the drivers do not automatically install, navigate to the Support tab to locate the driver installation instructions and downloads.

Installation

Front Ports

1. Connect a USB-A Cable to your USB-A Mobile Device for charging. Connect the other end of the USB-A Cable to the USB-A Charge Port on the Docking Station.
2. Connect a USB-C Cable to your USB-C Mobile Device for charging. Connect the other end of the USB-C cable to the USB-C Charge Port on the Docking Station.
3. Connect a 3.5 mm Stereo Audio Cable to your Speakers or Headset. Connect the other end of the 3.5 mm Stereo Audio Cable to the Audio Input/Output Port on the Docking Station.

Rear Ports

1. Connect the USB-C Cable (with Attached USB-C to USB-A Adapter) to your Host Laptop’s USB-A or USB-C Port. Connect the other end of the USB-C cable to the USB-C Host Port on the Docking Station.
2.  Connect a DisplayPort or HDMI Cable to your DisplayPort or HDMI Enabled Display Device. Connect the other end of the DisplayPort or HDMI Cable to the Video 1 DisplayPort Port or Video 1 HDMI Port on the Docking Station.
3. Repeat step 2 to add a second DisplayPort or HDMI Enabled Display Device to the Video 2 Ports.
4. Connect a CAT 5e/CAT 6 Cable to your Network Device (e.g. Router, Switch, Modem, etc.) and to the Ethernet Port on the Docking Station.
5. Connect a USB-A Cable to your USB-A peripherals. Connect the other end of the USB-A Cable to the USB-A Peripheral Port on the Docking Station.
6. (Optional) Repeat step 5 to add a second USB-A Peripheral.

Side Port

1. Connect a K-Slot Style Locking Device to the Lock Slot.
   Note: Follow the manufacturer’s instructions when installing your Locking Device.

Powering the Docking Station

1. Connect the Universal Power Adapter to the DC Power Input Port on the Docking Station.
2. Connect the appropriate Power Cable (NA/JP, ANZ) to the Universal Power Adapter.
3. Connect the other end of the Universal Power Adapter to an AC Electrical Outlet.

Operation

Power Button
The Docking Station will default to the On position when the Universal Power Supply has been connected. The Power Button will illuminate when the Docking Station is powered on. To power the Docking Station On or Off Press and release the Power Button.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 0.5cm between the radiator and your body.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Warranty Information
This product is backed by a three-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees, or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceeds the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• If the product has an exposed circuit board, do not touch the product under power.

StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
The U.S.A.| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom| fr.startech.com
---|---|---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>