OZARKE SKØRTER Trois Cercles Floor Lamp Instruction Manual
- June 2, 2024
- OZARKE
Table of Contents
OZARKE SKØRTER Trois Cercles Floor Lamp
Thank you
Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service reps will reach out to assist you.
Before you get started
When working with electrical wiring, follow these safety instructions to prevent injury or damage:
- Turn off the power: Before starting any work, turn off the power to the area you will be working in.
- Use appropriate tools: Only use tools designed for electrical work and in good condition.
- Wear protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
- Test for power: Use a non-contact voltage tester to check for electrical current before touching any wires.
- Avoid wet conditions: Do not work with electrical wiring in wet or damp conditions.
- Keep a safe distance: Stay away from exposed wires or electrical components.
- Seek professional help: Consult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems.
WARNING!
- Do not use the power supply beyond the specified range (100-240V,50Hz).
- Avoid scratching the surface and wires of the lamp during installation.
- Do not install the lamp outdoors.
- The lamp should not be close to corrosive chemical objects or gases.
It should not be washed with water. It can only be wiped with a clean soft cloth.
Installation Instructions
Tools and Materials You’ll Need:
- Phillips Head Screwdriver
- Adjustable Wrench
- Wire Strippers (if electrical wiring is involved)
- Small Container or Bag for screws and small parts
- Tape Measure or Ruler
- Cleaning Cloth
- Light Bulbs (according to specifications)
- Batteries (if required)
- Power Strip or Extension Cord
- Ladder or Step Stool (if necessary)
Instructions
1| Prepare the Area:
- Choose a location for the floor lamp, ensuring it is near a power source and complements your room décor.
---|---
2| Base Assembly:
- Attach the base components according to the instructions.
- Use the Phillips Head Screwdriver and Adjustable Wrench as needed.
- Ensure all screws and bolts are securely tightened.
3| Stand Assembly:
- Connect the stand or pole to the base, securing it with the provided hardware.
- Tighten any screws using the appropriate tools.
4| Electrical Wiring (if applicable):
- If the lamp involves electrical wiring, carefully thread the cord through the stand.
- Follow the manufacturer’s instructions for connecting wires, and use wire strippers if necessary.
5| Bulb Installation:
- Install the recommended light bulbs in the sockets
- Refer to the specifications for the correct bulb type and wattage.
6| Power On:
- Plug the lamp into a power source using a power strip or extension cord if needed.
- Turn on the lamp and test its functionality, including any adjustable features.
7| Adjustment:
- If your lamp is adjustable, experiment with different settings to achieve your desired lighting angle or height.
8| Secure Loose Parts:
- Double-check all connections and fittings to ensure everything is tightened and secure.
9| Clean and Dispose:
- Wipe down the lamp with a cleaning cloth.
- Dispose of packaging materials responsibly.
Remember, these steps are general guidelines. Always refer to the specific instructions provided by the manufacturer for your Ozarke Trois Cercles Floor Lamp to ensure proper installation and safe use. If you encounter any issues, contact the manufacturer’s customer support for assistance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>