KICKASS KA1224MPPT15A MPPT Solar Charge Controller User Manual
- June 6, 2024
- KICKASS
Table of Contents
KICKASS KA1224MPPT15A MPPT Solar Charge Controller User Manual
KA1224MPPT15A
1. MAIN FEATURES
- For use with monocrystalline, polycrystalline and amorphous silicon solar panels.
- Max solar panel open circuit voltage 60 volts.
- Max solar power input 200 watts (12V battery) or 400 watts (24V battery).
- Works with 12/24 volt battery banks.
- Works with lead acid, gel and AGM batteries.
- IP67 waterproof rating
- Overheat, reverse polarity, short circuit and overload protection built into controller.
2. EXTERIOR AND WIRING
WIRING DIAGRAM
Wiring sequence: connect first the battery and then the solar panel.
3. STATE INDICATORS
4. INSTALLATION DIMENSIONS
KA1224MPPT15A’s dimensions are as follows:
External dimensions: 142 x 88.3 x 24.5 (mm)
Installation dimensions: 102×82.3 (mm)
Installation hole diameter: 3.5 (mm)
5. TROUBLESHOOTING
6. PARAMETERS
Note: parameter settings shall comply with the following rule, i.e. boost charging voltage ＞ floating charging voltage ＞ over-discharge recovery voltage ＞ over-discharge voltage.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>