i-box Astral Galaxy Projector with Wireless Speaker Instruction Manual
- October 27, 2023
- i-box
Table of Contents
Galaxy Projector with Wireless Speaker
Introduction
Astral is a light projector with a difference, it boasts an attractive, modern design and has a mixture of lighting modes to suit any mood. Two 3W stereo sound speakers gives you crystal clear audio, pair the Astral up with any Bluetooth device and you can enjoy your favourite music too.
Features include:
- A rotating galaxy lighting effect and different light modes that you can select to create your perfect light scape.
- A separate laser projector that casts beautiful pin-point sharp stars onto the colourful galactic clouds.
- Astral can tilt up to 45° allowing light to be projected to the centre of the room from different positions
- Wide projection angle up to 120°
Caring for your Astral Projector
Important: please read these instructions carefully before using your Astral
projector.
Do not place naked flame sources, such as lighted candles on or near the
Astral.
Keep away from dripping or splashed liquids.
The unit should not be exposed to direct sunlight, very high or low
temperatures, moisture, strong magnetic fields high frequencies and
dusty environments. Always leave sufficient space around the unit for
ventilation.
Do not use abrasives, thinner or other solvents to clean the unit. To clean,
wipe with a damp, clean, soft cloth.
Never attempt to insert wires, pins or other such objects into the vents or
opening of the unit. Do not disassemble or modify the unit, there are
no user serviceable parts. If the Astral is damaged or malfunctions do not
use. Consult a qualified service engineer.
This product contains a Lithium coin cell battery keep the battery away from
children. The battery could be harmful if swallowed. Seek immediate medical
advice if you believe a battery has been swallowed.
Do not dispose of this product with household waste at the end of its
lifecycle; take it to a designated collection centre for the recycling of
electrical and electronic appliances with batteries. Please check with your
Local Authority for recycling advice.
WARNING: This product is equipped with a class 1 laser. Avoid looking
directly into the laser beam or pointing it at other people. The Astral
Projector is not a toy. Do not let children play with it unsupervised.
| |
---|---|---
Controls & Features
Top View
Controls & Features – Top Panel & Remote
1. Power On /Off Key
2. LASER Star Projector
3. Galaxy Projector Dome
4. LASER On/Off
5. Galaxy Preset Sequences| 6. Galaxy Rotation Speed
7. Bluetooth Key
8. Volume +
9. Volume –
10. Mute Key
---|---
Controls & Features – Remote Control and Base
11. Sleep Timer
12. Galaxy Projector Brightness
13. LASER – Star Brightness
14-21. Galaxy Colour Modes
22. Next Track
23. Previous Track
24.Play/Pause
25. USB-C Power Supply Input
26. Tilted Bases
Box Contents
- i-box Astral Projector
- Remote Control
- AC-USB-C Adaptor
- USB-C Cable
- User Guide & Quick Start Guide
Powering your Astral
To power the i-box Astral, plug the AC to USB-C adaptor into a mains socket,
connect the adaptor to the USB-C port (25) on the base of the Astral with the
USB-C cable supplied.
To switch the Astral ON/OFF press the (!) key (1) on the control panel or the
remote. The projectors will come on immediately and the Astral will also enter
Bluetooth pairing mode. The remote control is powered by a CR2032 lithium coin
cell to power the remote you must first pull out the protective plastic tab.
Projector Functions
The Astral features two seperate projectors, an LED galaxy projector for a
background light effect depicting galactic clouds or nebulae and a laser
projector that casts beautiful pin-point sharp stars onto the colourful
galactic clouds.
The galaxy projector rotates and the brightness, eight colour combinations,
the squence of colours and the speed of rotation can all be controlled and
there is also a restful slow pulsing or breathing cycle you can select in
which the light repeatedly slowly dims and brightens.
The laser projector controls are independent of the galaxy projector and you
can adjust the brightness of the stars select a pulsing/breathing mode (for
the stars) or switch them OFF if you just want to gaze at the galactic clouds.
Laser / Star Projector Controls
ON/OFF: To turn the Laser Star projector ON/OFF Press key (4) on the top panel or on the remote.
Brightness: To adjust the brightness of the Stars or select the
pulsing/breathing effect. Press the Laser Brightness key (13) on the remote.
Options: Bright/Medium/Dim/Breathing Cycle
Galaxy Projector Controls
Selecting Preset Galaxy Sequences:
There are 14 different preprogrammed sequences showcasing the range of
lighting effects and colours the Glaxy is cable of. Some are slow and gentle
with restful colours others faster and more dramatic, choose the best one to
fit your mood.
Press the Mode key (5) repeatedly to change.
FCC Statement-Galaxy Projector Light Remote
Changes or modifications not expressly approved by the party responsible for
compliancecould void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
FCC Statement-Galaxy Projector Light
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.