i-box WJ108 Daybreak FM Alarm Clock Radio with Wireless Charging User Manual
- June 5, 2024
- i-box
Table of Contents
- i-box WJ108 Daybreak FM Alarm Clock Radio with Wireless Charging User
- Introduction
- Caring for your Alarm Clock ll) Important Safety Information Important
- Box Contents
- Getting to know your alarm clock
- Top Panel
- Before getting started
- Setting the clock (In Standby mode)
- Select mode
- Sleep function (In FM mode/nature sound track mode)
- Headphone Jack
- USB charging ports
- Backup batteries
- Disclaimer
- Declaration of conformity
- Technical support
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
i-box WJ108 Daybreak FM Alarm Clock Radio with Wireless Charging User
Manual
Introduction
The i-box Daybreak elevates the bedside alarm clock radio to the next level,
providing many great features that will help you wake up feeling refreshed.
These features include 10W fast charging for any Qi-enabled device and
additional charging via the 2x 2.1A USB ports. The independent dual alarms
offer weekday options and a choice of radio, tone or natural
sounds to wake you. As well as listening to stereo FM radio over the SW
speakers you can playback your favourite tunes via Bluetooth.
The Daybreak combines impressive stereo sound with a modern, stylish design
which will compliment any bedroom decor, making it the perfect bedside
partner.
Caring for your Alarm Clock ll) Important Safety Information Important
– Please read these
instructions fully before installing or operating your speaker.
Keep away from flame sources such as lighted candles.
Do not expose to dripping or splashed fluids. Objects filled with liquids,
such as vases, must not be placed close to the speaker.
The unit should not be exposed to direct sunlight, very high or low
temperature, moisture, vibrations, strong magnetic fields, high frequencies
and dusty environments.
Do not place the product in enclosed bookcases or racks without proper
ventilation. Ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains, etc.
Never attempt to insert wires, pins or other such objects into the vents or
openings of the unit.
Do not disassemble or modify the alarm clock, there are no user serviceable
parts. If the alarm clock is damaged in anyway or malfunctions do not use.
Consult a qualified
service engineer.
Do not use abrasives, benzene, thinner or other solvents to clean the surface
of the unit. To clean, wipe with clean soft cloth and a mild detergent
solution.
Do not dispose of this product with household waste at the end of its life
cycle; hand it over to a collection centre for the recycling of electrical and
electronic appliances.
Box Contents
Getting to know your alarm clock
DC power adaptor
Before you get started please be sure to read through the safety information
on pages 2-3.
Top Panel
Before getting started
Before setup or making connections please unwind the wire antenna C!) fully.
To power your Daybreak connect the power adapter supplied to an electrical
outlet and the power socket O on the back panel. Your Daybreak will power up
in standby mode.
Setting the clock (In Standby mode)
Select mode
Sleep function (In FM mode/nature sound track mode)
The radio/nature track switches off after the selected time (in minutes) has elapsed.
Headphone Jack
For private listening to any audio output from the Daybreak connect your
headphones to the 3.5mm jack socket G on the back panel. Wireless charging
If your phone has Qi wireless charging capability [ !~ you can use the
charging panel on the top of ◊ ~ the Daybreak to charge it. – i
i Please Note: Wireless charging is likely to interfere with radio reception
therefore we advise you not :::. =========::::. to try listening to FM radio
during charging.
- Centre* your smartphone on the cross in the middle of the charging panel (1).
- The (C
l) wireless charging icon will be displayed in the bottom right corner of the LCD panel while your phone is charging and the battery charge status can be seen on your phone’s display. Please Note: Your phone will not charge when the Daybreak is in backup mode (not being powered by the power adapter).
If problems occur when charging or if charging does not start:
*Normally your smartphone should be centred on the charging pad as shown.
However some phones may need to be placed slightly off centre. As the built-in
wireless receiver may not be centred inside the phone. This varies by
brand/model.
Remove your smartphone from its case if the thickness of the case exceeds 5mm
or if it cotains metal.
The charging time varies depending on the charging capacity of the battery and
its current residual capacity.
The components may heat up during the charging process. They will slowly cool
down again after the charging process.
USB charging ports
- You can charge two external devices by connecting them to the USB charging ports (13 & 14) on the back of the your Daybreak.
- Your devices battery charge status will usually be shown on it’s display.
There may be some radio interference while charging. Please charge devices using one charging method at a time (wireless or USB).
Please do not try to charge the same device using the wireless charging function and one of the USB charging ports (13 or 14) at the same time.
Backup batteries
The Daybreak has a backup battery feature. Please insert 2x AAA batteries (not
supplied) into the battery compartment on the underside of your Daybreak (see
page 6). This will ensure that time and alarm settings are remembered if the
Daybreak is unplugged or there is a power cut.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. ALL items described in this guide are for illustration purposes only and may not apply to your particular situation. No legal right or entitlements may be obtained from the description made in this manual.
Declaration of conformity
Hereby, Phitex Electronic Ltd. declares that the radio equipment: model i-box Daybreak Alarm Clock with Bluetooth Speaker and Wireless Charging for wireless reception in domestic premises is in compliance with the Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.philex.com/doc
Technical support
For further help, advice, information or live chat visit www.iboxstyle.com or www.philex.com/support
Waste electrical and electronic products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority for recycling advice