i-box 79332PI Sonoro 60W Dolby Digital Soundbar User Guide

: June 4, 2024
: i-box

Table of Contents

i-box 79332PI Sonoro 60W Dolby Digital Soundbar User Guide
Introduction
Caring for your TV Sound bar
Box Contents
Connections – Set up
Controls and Features
- Side Panel- Soundbar
Indicators (Soundbars)
GREEN LED:
Controls & Features – Remote Control
Controls and Features – Remote Control
Pairing a Bluetooth audio source
Troubleshooting
Disclaimer
Declaration of conformity
Technical support
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

i-box 79332PI Sonoro 60W Dolby Digital Soundbar User Guide

Introduction

A compact powerful TV sound bar with sleek looks and excellent audio response. With Dolby audio decoding and processing for superb surround sound effects. Four 5.7cm (2.25″) mid to low range drivers, two tweeters and 2 bass tubes provide clarity across a broad frequency range, with crisp highs and a surprisingly deep bass for the unit’s size. Multiple EQ Modes can be set to optimise your audio output according to type with further enhancement using the Dynamic, Hi-Fi and Surround Sound mode settings. Flexible input options include HDMI (ARC). Optical, Bluetooth and Aux. An integral USB port also enables playback of MP3/WAV files directly from compatible media.

Slender and stylish metallic grey design
6 speakers for crisp, clear sound with deep bass
4 EQ presets with 3 mode settings
Dolby Audio decoding and audio post-processing technology
Anti-magnetic design to remove any residual static noise even at low volume.
HDMI ARC, Optical, Bluetooth, Auxiliary and USB (for MP3) audio Inputs
Dedicated remote for full control
CEC technology provides the option of ON/OFF and Volume control using your TV remote while in HDMI/ARC mode.

Caring for your TV Sound bar

Do not place naked flame sources, such as lighted candles on or near the sound bar.
Do not expose to liquids. In case of accidental spillage on the unit, disconnect power immediately and then dry the product with clean, soft cloth or paper towels. If you believe fluids may have penetrated he casing allow the unit time to properly dry out at room temperature for as long as it takes. Do not heat the unit or disassemble it as this will invalidate your warranty.
The unit should not be exposed to strong direct sunlight, very high or low temperatures, moisture, strong magnetic fields, or very dusty environments.
Always leave sufficient space around the unit for ventilation.
Do not use abrasives, solvents or polish to clean this product. Use only a clean, damp, soft, cloth.
Never attempt to insert wires, pins or other such objects into the unit.
Do not disassemble or modify the unit, there are no user serviceable parts. If the sound bar is damaged or malfunctions do not use. Consult a qualified service engineer.
Do not dispose of this product with household waste at the end of its life cycle; take it to a designated collection centre for the recycling of electrical and electronic appliances with batteries. Please check with your Local Authority for recycling advice.

Box Contents

Soundbar
Remote Control
User Manual
Aux-ln Cable
Power Cable
Wall mount screws

Connections – Set up

HDMI (ARC): Use to connect to TV audio using a HDMI cable (not provided). Please Note: In this mode you can use the TV remote to control on/off and volume
OPTICAL IN: Use to connect compatible TV audio using an optical cable (not provided).
USB IN: Use to connect a flash drive containing MP3/WAV files for direct playback (FAT32 format and 64GBmax).
The media player also has a memory function that will recall and continue from the last-played point when a USB flash drive that has previously been used with the soundbar is reinserted.
Stop playback and switch off the soundbar before removing USB media to avoid corruption.

Use the Next Track button (10) on the remote to select the track you want
AUX IN: Use to connect compatible devices (mp3 players, portable CD’s etc.) using the 3.5mm – 3.5mm stereo jack cable (provided).

Controls and Features

Speaker drivers
LED indicator
HDMI (ARC) input
D 4. Optical input
USBinput
AUX input
On/Off switch
Figure-8 mains lead socket
Standby Key
Mode selection
Volume+
Volume-

See page 6 for the Remote Control features and buttons.

Side Panel- Soundbar

Indicators (Soundbars)

RED LED : Standby mode, Short press the LED Off key (20) on the
remote to turn Off/On the Standby LED.

GREEN LED:

Bluetooth: Bluetooth mode.
Pairing with phone or tablet for audio input. bt flashing= is ready to pair, bt solid= paired

USB: USB media mode – reading mp3/WAV media attached to USB socket

AUX: Auxiliary input mode – reading from 3.5mm AUX in port and compatible device
OPT: Optical input mode – reading from Optical in port and device connected by OPI: TOSlink opitcal cable
HDMI (ARC): Playing from device connected by HDMI cable

Controls & Features – Remote Control

Controls and Features – Remote Control

Power on/off – 11. Volume – (decrease volume) Long Press to turn off 12. Music EQ Mode
Mute 13. Movie EQ Mode
Bluetooth Input Mode 14. News/ Game EQ Mode
HDMI Input Mode 15. Dynamic EQ Mode
Optical Input Mode 16. Hi-Fi EQ Mode
AUX/USB Input Modes 17. 3D Surround On/Off
Volume+ (increase volume) 18. Bass+ (Increase Bass)
Previous Track 19. Bass – (Decrease Bass)
Play/Pause 20. USB Loop Mode/ LED
Next track Indicator On/Off

Input Settings
You can connect audio sources to your soundbar and use the remote to select those sources (3/4/5/6).
Audio Settings
You can use the volume (7 or 11) and bass keys (18 or 19) to adjust the sound. Use Previous, Play/Pause and Next (8, 9, 10) keys to control Bluetooth and USB playback.
EQ Presets (12/13/14)
Select the EQ preset that matches the audio being listened to. Select from Music (12), Movie (13), News (14) and Games (14).
Dynamic EQ Mode (15)
Enhance the dynamic effects of the EQ presets: Music/ Movie/ News/ Games, suitable for scenes needing more powerful sound effects.
Hi-Fi EQ Mode (16)
Adjust the sound effect of the different EQ preset: Music/ Movie/ News/ Games, for a clearer sound, suitable for quiet scenes such as dialogue.
3D Surround Sound (17)
Can only be activated in movie mode.
USB Loop Mode (20)
In USB Mode, short press (20) to single loop or full loop the media.

Pairing a Bluetooth audio source

To play music from your phone, tablet or mp3 player wirelessly pair it with the sound bar.
Enter the Bluetooth mode by pressing the BT button (3), the LED on the soundbar will flash to indicate the device is searching for devices. Open the Bluetooth menu on your device, look for ‘i-box Sonoro’ tap that to connect. When paired successfully the LED on the sound bar will be solid.

If it doesn’t show the first time, move closer and search for new device again.

Now select a piece of music, podcast, audio book etc. and play! Adjust the volume on your device first then on the sound bar to avoid sudden volume increases when changing source.

You don’t need to re-pair. Your soundbar will automatically reconnect with this device when it is in range and both are turned on.

Troubleshooting

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to your particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Declaration of conformity

Hereby, Philex Electronic Ltd. declares that the radio equipment: model i-box Sonoro sound bar, for wireless reception in domestic premises is in compliance with the Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.philex.com/doc