i-box dawn Bluetooth Radio Alarm Clock with Wireless User Manual
- June 5, 2024
- i-box dawn
Table of Contents
i-box dawn Bluetooth Radio Alarm Clock with Wireless User Manual
SAFETY PRECAUTIONS:
Do not operate the equipment before studying the instruction manual and the accompanying safety precautions. Make sure that Lupo Safety Instruction is always included with the equipment! Lupo products are intended for professional use. Do not place or use the equipment where it can be exposed to moisture, extreme electromagnetic fields or in areas with flammable gases or dust! Do not expose the equipment to dripping or splashing. Do not place any objects filled with liquids on or near the equipment. Do not expose the equipment to hasty temperature changes in humid conditions as this could lead to condensation water in the unit. Equipment must only be serviced, modified or repaired by authorized and competent service personnel!
CAUTION – BURN HAZARD – HOT PARTS
Do not touch hot parts with bare fingers! LED bulbs and certain metal parts
emit strong heat when used!
Do not point lamps too close to persons. Always use the fixtures with the
front part closed.
NOTICE – EQUIPMENT OVERHEATING RISK
Do not obstruct ventilation by placing filters, diffusing materials, etc. over inlets and outlets of the equipment ventilation or directly over glass cover or LED bulbs.
FINAL DISPOSAL
When no longer in use, this product may not be deposited in the normal
household waste but should be brought to a collection point for the recycling
of electrical and electronic appliances. The materials are recyclable as
marked. By re-use, recycling or another form of usign old appliances you are
making an important contribution towards the protection of the environment.
Please ask your local authorities for
the appropriate disposal point. Equipment contains electrical and electronic
components that could be harmful to the environment. Equipment may be returned
to Lupo distributors free of charge for recycling according to WEEE.
Follow local legal requirements for separate disposal of waste, for instance WEEE directive for electrical and electronic equipment on the European market, when product life has ended!
MAINTENANCE AND CARE
Please do not forget that the safe operation of lampheads also includes their maintenance and care. A visual inspection should be conducted before every use and an inspection of electrical safety should be conducted at least once every 12 months.
WARRANTY
Each Lupo product will be repaired free of charge by Lupo if during a period of 12 months for mechanical components and 12 months for electrical/electronic components from date of purchase its working order is impaired through a manufacturing or material defect. The faulty product should be immediately sent to authorized dealer or Lupo. This warranty is not valid for equipment which has been used improperly, dismantled, modified or repaired by persons not belonging to the Lupo distribution network. It does not cover lamps, lenses or the material entirely or partially made of glass. No responsibilities can be accepted for damage resulting from unsatisfactory operation of the equipment. Please contact the dealer who sold the fixture/s before any units are returned for repair. Lupo will make the final determination as to whether or not the unit is covered by warranty. Lupo will replace or repair to proper working condition any products that are returned under waranty. Products repaired or replaced under warranty are under warranty only for the remaining unexpired period of time of the original warranty. Any product unit or part returned to Lupo must be packaged in a suitable manner to ensure the protection of such product unit or parts. The package must be clearly an prominently marked to indicate that the package contains returned product units or parts. All returned product units or parts must be accompanied by a written explanation of the alleged problem or malfunction.
WARNING:
When hanging the fixture from higher position, please make sure you use a
safety cable to attach the barndoors to the yoke of the fresnel.
Barndoors should always be secured to the yoke when used in this way.
Another safety cable should be used to secure the fixture to the mounting pipe
or truss.
Both safety cables must be properly dimensioned for the fixture and the
application when the fixture is operated in hanging position please ensure
that the accessories are installed correctly with top latch locked.
Thanks for having purchased Lupo products. All the products are made in Italy and all the efforts have been put to keep the quality standards high. We hope this product can help you in your job and make your life easier as a professional. We also hope you will enjoy its use and we would be happy to receive your feedback about it.
Instructions
- Device for indoor use only.
- Protection standard IP20.
- Maximum ambient temperature: 40 °C.
- Make sure power supply plug is suitable to power required.
- As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling.
- To switch on the light push the on/off button.
- Dayled 650 and Dayled 1000 models are equipped with new generation high quality LED arrays.
- Dayled 650 is equipped with 60 W single LED array.
- Dayled 1000 is equipped with 110 W single LED array.
- Dayled 2000 is equipped with 220 W single LED array
Package Contents for Dayled PRO
ATTENTION : Please keep the original package of the product in a safe place for warranty reasons.
Package Contents for Movielight 300 PRO
ATTENTION : Please keep the original package of the product in a safe place for warranty reasons.
Accessories
The accessories are products sold separately.
COMPLETE KIT OF V-MOUNT BATTERY POWER SUPPLY FOR DAYLED 650 AND 1000.
The items are also sold separately.
Getting Started with the Dayled PRO
Dayled 2000 PRO
Dayled 1000 PRO
Dayled 650 PRO
Getting Started with the Movielight 300
OPERATION MODE
-
Manual Operation
-
DMX Operation
-
Manual Options
-
**DMX Options
**
DMX Protocol
*Channel in use only the Dual Color version.
** Only available if enabled in DMX ADVANCED.
3. Device Settings
Display: 30sec / 1min / ALWAYS ON. Time during which the display
backlight stays on.
Menù View: Type the main MENU, sub-menus and functions to show. ONLY
MANUAL / ONLY DMX / MANUAL/DMX.
Frequency : Dimmer frequency 2500 – 1800 K
Filter: FULL SPEED / NORMAL SPEED / HIGH SPEED / LOW SPEED. It is the
speed response of the system (smooth factor).
Linearization: LINEAR / EXPONENTIAL / LOGARITHMIC. Linearization is the
compensation curve for the human eye’s perception of the luminous intensity
emitted as a function of the required power (required power = dimmer value on
the display).
– Linear: No compensation, the intensity of the light is directly
proportional to requested power
– Exponential: The light intensity increases from 0 to 100 exponentially.
– Logarithmic: The light intensity increases from 0 to 100
logarithmically.
CCT Limit: CCT range 2800 – 6500 or 3200 – 5600
4 Reset Device
- To set the factory settings, select YES by pressign the (2) button.
- Press « OK » (3) to confirm the selection.
- The device will ask for further confirmation, select YES by pressing the (2) button.
- Press « OK » (3) to confirm the selection.
FACTORY SETTINGS: Mode: CCT or MONOCOLOR – DMX : Off – Bit : 8bit
– DMX signal loss:
Settings 1 Min – Display : 1 Min – Filter : Normal Speed –
Linearization : Linear
BLUETOOTH
Enable / Disable BLE App interface
Advanced Features Menu e Sub – Menus
– Select “EXIT” with the « OK » (3) button to return to the last
selected mode.
– Select “BACK” with the « OK » (3) button to return to the previous
menu.
NOTE: After 1 minute of inactivity in the menu, the device automatically exits and returns to the last selected mode.
Lupo srl – Via V. Sassi 28/30 Collegno (TO) – 10093 – Italy
Phone : +39 011 411 9919 / e-mail : contact@lupo.it / website : www.lupo.it