RemotePro Garage Remote Programming M802 Instructions
- June 6, 2024
- RemotePro
Table of Contents
RemotePro Garage Remote Programming M802 Instructions
M802 Instructions
- Unscrew the small screw at the back of the new remote and remove the small tab from the battery.
- Open your original remote (if you do not have one, please remove the tab at the back of your motor which is labelled ‘code dip switches’ or remove the light cover of the motor to find the switches.
- Change the switches of the new remote to match either your old remote or your motor.
- Close the remote and test.
WARNING
To prevent possible SERIOUS INJURY or DEATH:
- Battery is hazardous:NEVER allow children near batteries.
- If battery is swallowed, immediately notify a doctor.
To reduce risk of fire, explosion or chemical burn:
- Replace ONLY with the same size and type battery
- DO NOT recharge, disassemble, heat above 100° C or incinerate
Battery will cause SEVERE or FATAL injuries in 2 hours or less if swallowed or placed inside any part of the body.
Read User Manual Online (PDF format)
Loading......