RemotePro Coding HT3 Remote to Motor Instructions

June 6, 2024
RemotePro

RemotePro

RemotePro Coding HT3 Remote to Motor

RemotePro Coding HT3 Remote to Motor

  1. Remove the face plate of the motor to locate the radio set button.
  2. The radio set button is generally yellow but the colour may vary depending on your motor model.
  3. Press the radio set button on your motor once and release.
  4. A light will illuminate on your motor.
  5. Press and hold the button on the new remote which you wish to operate the motor until the light on the motor goes out.
  6. Your remote is now programmed. Please push the button on the remote to test.  www.remotepro.com.au

Board 3

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals