RemotePro GRIFCO Instructions
- June 6, 2024
- RemotePro
Table of Contents
RemotePro GRIFCO Instructions
GRIFCO INSTRUCTIONS
- Press and release the purple “learn” button on the motor unit. The learn indicator LED will glow steadily for 30 seconds.
- Within 30 seconds, press and hold the button on the hand-held remote* that you wish to operate your door.
- Release the button when the motor unit LED two clicks.
WARNING
To prevent possible SERIOUS INJURY or DEATH:
-
Battery is hazardous:NEVER allow children near batteries.
-
If battery is swallowed, immediately notify a doctor.
To reduce risk of fire, explosion or chemical burn:
- Replace ONLY with the same size and type battery
- DO NOT recharge, disassemble, heat above 100° C or incinerate Battery will cause SEVERE or FATAL injuries in 2 hours or less if swallowed or placed inside any part of the body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>