W-KING K3H Large Power Portable Speaker User Manual
- June 12, 2024
- W-KING
Table of Contents
W-KING K3H Large Power Portable Speaker
INTRODUCTION
Thank you and congratulations on your choice of W-KING K3H wireless portable PA speaker. Before using this speaker, please take a few minutes to read this manual, which includes detailed messages concerning the proper operation of the unit.
WHAT’S IN THE BOX
- Main unit x1
- Wireless microphone x 1
- Remote control x 1
- Charging adapter x 1
- Audio cable x1
PRODUCT OVERVIEW
-
Knobs: ECHO / MIC VOL / VOLUME / TREBLE / BASS
Adjust the speaker reverberation I microphone volume / speaker volume / music treble / music bass -
ACCOMPANIMENT
Press to eliminate the vocal when you want to use the source for Karaoke as accompaniment. -
RECORD
Press to record your voice to the storage device; press again to stop recording. (Only workable when insert a USB storage device or TF card, and microphone is connected). -
RECORD PLAY
Press and hold to play recording voice;
During playing, press to switch between playing single file and loop all; press and hold to delete playing voice file. -
PREVIOUS
Press to switch to the previous song. -
PLAY/PAUSE /MUTE
Press to play/ stop the music; in AUX IN mode, press it to mute the speaker. -
NEXT
Press to switch to the next song. -
MICROPHONE PRIORITY
Press this button to make the microphone takes priority over background music. -
MODE
Press to toggle between Bluetooth, USB, TF, AUX IN mode.
-
TF CARD READER
Insert a TF card to enter TF card mode automatically. The speaker can play music stored at the TF card. Format: MP3, WAV, APE, FLAC, WMA. -
USB DEVICE READER
Insert a USB device to enter USB mode automatically. The speaker can play music stored at the USB device. Format: MP3, WAV, APE, FLAC, WMA. -
AUX
Connect to an external audio device through a 3.5mm audio cable. -
WIRED MICROPHONE
Connect with wired microphone. -
RESET
Insert a needle to reset the speaker. -
CHARGING
Please use the included adapter to charge the speaker. -
LED INDICATOR
Show the charging state. -
POWER
Press to turn on or turn off the speaker.
Speaker state indicators
Status or Actions
| DISPLAY STATE
---|---
Power on/off|
Display on/off
Bluetooth pairing
| Bluetooth icon flashes
Bluetooth paired|
Bluetooth icon on
Record
| REC icon
Storage device missing when press record button|
EROR icon
Delete recording file
| DELE icon
AUX IN/USB/TF card mode|
AUX IN/USB/TF icon on
TWS connection
| TWS icon flashes when pairing;
TWS icon on when successfully connected.
Volume adjustment|
Number increase or decrease
USING THE SPEAKER
-
Bluetooth Connection
Connect your W-KING K3H with Bluetooth-enabled devices. -
Power on K3H, it enters Bluetooth pairing mode automatically;
-
Choose “W-KING K3H” to connect.
-
Once successfully connected, music will stream to this speaker.
Disconnect Bluetooth
(1) K3H can remember a maximum of 8 paired devices.
(2) In Bluetooth mode, press and hold MODE button to disconnected.
Remarks:
(1) When turn on this speaker next time, it will reconnect to the last connected device automatically. If not, please try manually.
(2) Bluetooth transmission distance may vary with environment. -
TWS Connection
Connect 2pcs K3H together via TWS function -
In Bluetooth mode, press and hold MODE Button on one speaker {this one will be primary speaker), TWS icon flashes on display to enter TWS automatically connection process;
-
After TWS connection build-up, TWS icon on the primary speaker stays on.
-
Choose “W-KING K3H” on your device Bluetooth setting page.
Remarks:
* TWS two K3H should in the same software and hardware version. -
Charging the Speaker
-
When battery voltage is lower than 9.3V, K3H will power off automatically.
-
When battery voltage is lower than 9.6V, you will hear prompt tone
-
Please use included charging adapter to charge the speaker.
-
The red LED turns on when charging, and turn off when finish charge.
- Remark: to protect the battery, please charge it at least once every 6 months when you don’t use it for a long time.
USING THE MICROPHONE
K3H includes one high-quality wireless microphone.
Pairing
- Press the POWER Button to power on the microphone first;
- Press and hold the PAIRING Button for one second to enter pairing mode, the display flashes
- Power on the speaker, press the PORWER Button on the microphone, the microphone will connect to the speaker automatically. After successful connection, the screen stops flashing.
Press the PAIRING Button to exit pairing mode.
- Please make sure there is no signal interference during the paring process.
USING THE REMOTE CONTROL
SPECIFICATIONS
Bluetooth version: 4.2.
Bluetooth transmission distance: 10 meters.
Product size: 35.0527.915.3cm.
Speaker drivers: 5.25-inch woofer, 2.5-inch tweeter
S/N:~70dB.
Frequency range: 80Hz-13KHz.
Battery: 13200mAh battery cells capacity.
Working time: 4-6 hours (vary with music and volume).
Charging: DC15V/1600MA.
Charging time: around 3-4 hours.
***** Transmission distance is tested in open space without interference.
_ ***** The above data is based on WEIK/NG laboratory environment and test
results; actual playtime _may vary with environment and user habit, for
reference only.
SAFETY NOTICE
- Please read and keep this manual for reference.
- Do not open (or modify in any way) the unit.
- Do not attempt to repair the unit, or replace parts within it. Refer all servicing to your retailer or an authorized W-KING distributor.
- Never use or store the unit in an extreme temperature, humid or dusty environment; please not expose the unit to rain or chemical materials, and it’s dangerous to put it in vibration places, please make sure it’s placed stable before using. Please avoid strong impact.
- When use by children, please make sure an adult provide supervision until they are familiar with operation methods and safe operation notice.
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>