V-TAC VT-8401 LED Dome Light Instruction Manual
- June 17, 2024
- V TAC
Table of Contents
Meaningful Innovation.
VT-8401 LED Dome Light
VT-8401 LED Dome Light
Instruction Manual WEEE Number: 80133970
INSTRUCTION MANUAL
LED DOME LIGHT
CCT CHANGING
WITH REMOTE CONTROL
02 YEAR WARRANTY
TECHNICAL DATA
| MODEL | VT-8401 | VT-8403 | VT-8555 | VT-8503 |
|---|---|---|---|---|
| SKU | 2114741 | 2114601 | 2114551 | 2114611 |
| WATTS | 40W(4000K) | |||
| 20W (3000-6500K) | 40W (4000K) | |||
| 20W (3000-6500K) | 60W(4000K) | |||
| 30W (3000-6500K) | 60W(4000K) |
30W (3000-6500K)
LUMENS| 4000LM (4000K)| 4000LM(40W)| 6000LM(60W)| 6000LM(60W)
BEAM ANGLE| Sphere 360°
LIFE SPAN| 20.000 Hours
ON/OFF CYCLE| >15.000 Times
CRI| <80
COLOR TEMPERATURE| 3000K-6500K (Changeable)
INPUT POWER| AC: 220-240V. 50/60Hz
IP RATING| IP20
MATERIAL| Plastic
DIMENSION| 465x75mm| 395x80mm| 565x75mm| 500x9Omm
‘This product contains a light source of energy efficiency class
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn o¢ the power before starting the installation.
- Installation must be performed by a certified person.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Proper grounding should be ensured throughout the installation.
- For Indoor use only
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Method of attachment of the cable or cord such that any replacement can only be made by the manufacturer, his service agent or similar qualified person.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
ATTENTION! Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavorable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. In the area of strong electromagnetic interference, the functioning of the product may be disrupted.
REMOTE CONTROLLER INSTRUCTIONS
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut o¢ and the product has cooled down. Clean only with so§ and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product designed with non-replaceable light source of the LED type. Product cannot be fixed if the light source becomes damaged. Remote control works on 2xAAA battery (not included).
MOUNTING
Read the manual before mounting. Mounting should be performed by a qualified electrician. Exercise caution. Product has a protective contact /terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use.
INSTALLATION INSTRUCTION
- Switch O¢ the Power Before Starting the Installation.
- Twist and remove the cover (Ref Image Part 2)
- Drill a hole in the ceiling to fix the light using screws (Ref Image Part 3)
- Connect the wires (Ref Image Part 4) before fixing the light using screws on the ceiling.
- Twist and lock the cover to the light (Ref Image Part 5)
- Switch ON the power and test the light.
INSTALLATION DIAGRAM
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO
US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE,
INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B