RemotePro Explorer Instructions

RemotePro Explorer

1. Sit in the car with doors closed.
2. Insert the key into the ignition.
3. In less than 10 seconds, turn the key from the off position to on position 8 times. The key must end in the on position.
4. If completed correctly, the doors will either lock or lock and unlock – this indicated you have entered learn mode.
5. If the door locks do not react, please repeat step 3.
6. Press any button on the new remote and the doors will lock – this indicates the remote has been programmed.
7. Remove the key and test the remote.
   www.remotepro.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>