COMMSCOPE EQ-P1818-EP-LP-004 Heavy Duty Platforms Installation Guide
- June 10, 2024
- CommScope
Table of Contents
EQ-P1818-EP-LP-004 Heavy Duty Platforms
Installation Guide
GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN
ALL
U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND
EQUAL FORCE ON EACH LEG OF THE U-BOLT.
TEST
PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING
CONTAINER.
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED.
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM| PART NO.| DESCRIPTION| QTY.| WEIGHT| NOTE
NO.
---|---|---|---|---|---
1| EQ-P1818-EP-B| PLATFORM, 18X18, BASE-KIT| 1| 4945.98 LBS|
2| EQ-P-LP-0303| LANDING-PLATFORM, 3’X3′| 1| 325.92 LBS|
3| EQ-SL4.0| SHIP LADDER, 4′ ELEVATED PLAT/HR| 1| 214.62 LBS|
4| EQ-P1818-EP-R4| RISER FOR EQ-P1818-EP-LP, 4′| 1| 1300.98 LBS|
1.0 GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO:
https://www.cs-pat.com
2.0 DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST
BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE
REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION,
TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE
THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
3.0 MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN
ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE
AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
4.0 TEST
5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING
CONTAINER.
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED.
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES; INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM| PART NO.| DESCRIPTION| QTY.| WEIGHT| NOTE
NO.
---|---|---|---|---|---
1| EQP1818-1000-00| 18′ SIDE CHANNEL, EQUIPMENT PLATFORM| 7| 202.43 LBS|
2| EQP1818-1001-00| 18′ SIDE CHANNEL, EQUIPMENT PLATFORM| 2| 204.87 LBS|
3| MTC7902101803| 36″ X 18′ BAR GRATING| 6| 362.47 LBS|
4| EQP0810-1400| WELDMENT, ANGLE STEEL REINFORCEMENT| 14| 9.73 LBS|
5| GB-05205| 5/8″ X 2″ GALV BOLT KIT| 56| 0.26 LBS|
6| GWF-05| 5/8″ GALV FLAT WASHER, 1.70D| 112| 0.06 LBS|
7| MTC390324| BAR GRATING CLIP| 54| 0.17 LBS|
8| TS1220| 12-24 X 2″ SELF DRILLING SCREW| 54| 0.03 LBS|
9| EQPTB-1203-00| TOEBOARD| 7| 18.59 LBS|
10| EQPTB-1204-00| TOEBOARD| 1| 12.27 LBS|
11| EQPHR-1203-00| RECTANGLE TUBE, HANDRAIL| 14| 18.93 LBS|
12| EQPHR-1204-00| RECTANGLE TUBE, HANDRAIL| 2| 12.40 LBS|
13| MTC403721| POST, HANDRAIL| 31| 9.98 LBS|
14| EQP0303-1002-00| FORMED ANGLE, HANDRAIL STIFFENER| 8| 1.43 LBS|
15| MTC3979HR19| ANGLE BRKT, HANDRAIL| 6| 0.32 LBS|
16| TS1288| 12-24 X 7/8″ SELF DRILLING SCREW| 24| 0.01 LBS|
17| GB-03165| 3/8″ X 1-3/4″ GALV BOLT KIT| 62| 0.07 LBS|
18| GB-03105| 3/8″ X 1″ GALV BOLT KIT| 93| 0.05 LBS|
19| GB-03205| 3/8″ X 2″ GALV BOLT KIT| 16| 0.08 LBS|
20| GWF-03| 3/8″ GALV FLAT WASHER| 78| 0.01 LBS|
ONLY SHOWN BASE FRAME FOR CLARITY
1.0 GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO:
https://www.cs-pat.com
2.0 DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST
BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE
REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION,
TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE
THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
3.0 MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN
ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE
AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
4.0 TEST
5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING
CONTAINER.
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED.
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM| PART NO.| DESCRIPTION| QTY.| WEIGHT| NOTE
NO.
---|---|---|---|---|---
1| MTC3823A40-00| WELDMENT, 4′ ELEVATED LEG| 2| 52.91 LBS|
2| MTC3823A41-00| WELDMENT, 4′ ELEVATED LEG W/B| 4| 60.31 LBS|
3| MTC3823A42-00| WELDMENT, 4′ ELEVATED LEG W/B| 2| 62.77 LBS|
4| MTC3823A47-00| ANGLE BRACE LONG, 4′ RISER| 6| 77.28 LBS|
5| MTC3823A48-00| ANGLE BRACE SHORT, 4′ RISER| 8| 42.17 LBS|
6| MTC3823A34-00| PLATE SPACER, ELEVATED LEG| 7| 0.18 LBS|
7| GB-05205| 5/8″ X 2″ GALV BOLT KIT| 59| 0.26 LBS|
8| GWF-05| 5/8″ GALV FLAT WASHER, 1.70D| 76| 0.06 LBS|
1.0 GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO:
https://www.cs-pat.com
2.0 DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST
BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE
REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION,
TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE
THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
3.0 MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN
ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE
AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
4.0 TEST
5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING
CONTAINER.
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED.
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM| PART NO.| DESCRIPTION| QTY.| WEIGHT| NOTE
NO.
---|---|---|---|---|---
1| EOPSL-1113-00| LADDER LEG, LEFT SIDE| 1| 33.69 LBS|
2| EQPSL-1114-00| LADDER LEG, RIGHT SIDE| 1| 33.69 LBS|
3| EQPHR-1109-00| HANDRAIL, LADDER| 4| 9.90 LBS|
4| EQPS0624-00| 6’x2e STAIR GRIP STEP| 5| 8.13 LBS|
5| MTC403721| POST, HANDRAIL| 4| 9.98 LBS|
6| EQPSL-1102-00| HANDRAIL SPACER| 4| 1.81 LBS|
7| EQPSL-1103-00| HANDRAIL BRACKET LEFT| 2| 0.75 LBS|
8| EQPSL-1104-00| HANDRAIL BRACKET RIGHT| 2| 0.84 LBS|
9| ‘MC95771105| LADDER ANCHOR CLIP| 2| 0.92 LBS|
10| MTC9577.14| STEP CHANNEL MOUNTING ANGLE| 2| 3.10 LBS|
11| GB-04125| 11T X 1-11W GALV BOLT FUT| 4| 0.12 LBS|
12| GB-05205| 518- X T GALV BOLT KIT| 8| 026 LBS|
13| GWF-05| 518- GALV FLAT WASHER, 1.700| 8| 0.06 LBS|
14| GB-03205| 3/8- X T GALV BOLT KIT| 8| 0.08 LBS|
15| GB-03305| 3/8- X W GALV BOLT KIT| 8| 0.11 LBS|
16| GB-03165| 3/W X 1-314′ GALV BOLT KIT| 8| 0.07 LBS|
17| GB-03105| 3/8- X 1′ GALV BOLT KIT| 20| 0.05 LBS|
18| GWF-03| 318- GALV FLAT WASHER| 22| 0.01 LBS|
C 2024 CommScope, Inc. Confidential
Documents / Resources
|
COMMSCOPE EQ-P1818-EP-LP-004 Heavy Duty
Platforms
[pdf] Installation Guide
EQ-P1818-EP-LP-004, EQ-P1818-EP-LP-004 Heavy Duty Platforms, Heavy Duty
Platforms, Duty Platforms, Platforms
---|---