VIETA PRO VHP-BT499 Headphone Gently User Manual
- June 6, 2024
- Vieta Pro
Table of Contents
VIETA PRO VHP-BT499 Headphone Gently User Manual
This product has been developed under the VIETA PRO quality standards. For
over 60 years, since its foundation in 1954 by the Vieta brothers, Vieta has
always been guided by the motto ‘Love and respect for the art of music”. It
has thus achieved a privileged position in the electronics market, with
constant effort and generous doses of passion.
The VIETA PRO models are based on professional sound standards, where quality,
durability and sound are above those in commercial products of consumer
electronics. They have been developed by the prestigious engineer “Jordi
Hernandez’. with more than 40 years in the sound industry. Under his expert
direction, the VIETA PRO models are manufactured with the most precise
components, producing the purest VIETA PRO sound.
Bluetooth headsets are intended for use with devices that support Bluetooth
wireless technology. This will allow you to make calls and enjoy music freely
at any time. Please read this user manual carefully before using the
headphones as the smartphone manual regarding the use and activation of the
Bluetooth function.
Pay attention to the safety and maintenance recommen-dations of the device
and, for safety reasons, keep the handset out of the reach of children.
Controls
- MFB(Multi-functional) Button
- Volume+/Next Track
- Volume-/Previous Track
- 3.5 m m Audio Port
- USB Charging Port
- Mic
- Indicator LED
Key description
| Function| Operation
---|---|---
1| Power On| Press the Power button for 3 seconds until you hear “Power on”.
Power off| Press the Power button for about 3 seconds until you hear “Power
off”.
Pairing| Press the Power button for 3 seconds until LED light in blue/red
alternatively and sound of “Pairing” occurred. Open your Bluetooth equipment
and find the
model of “Vieta Pro Gently” in your list, then click for paring until you hear
“Paired”.
Answer/End calls| Press once for answering the call or end a call.
Reject calls| Press and hold for 1 seconds to reject the coming call.
Play/pause| Short press to play/pause.
Voice assistant| Double click to activate your phone’s voice assistant.
2| Next track| Short press on V+ to go to the next track.
Volume up| Press 3 seconds on V+ to increase the volume.
3| Previous track| Short press on V- to go to the previous track.
Volume down| Press 3 seconds on V- to decrease the volume.
4| 3.5mm Audio Port| Connect the cable with microfone included in the pack to
this port, to be able to connect to your devices without headphone battery
consumption.
(Cable included in the pack).
5| Type-C charging port| Connect to your USB interface of your PC and Laptop
or any other USB power outlets. It will power off automaticity when charging.
6| MIC| The cable that is included in the pack has a small microphone pickup.
Use guidelines
- Charging: Be sure the headphone is power off, and then connect the charging cable on the USB interface of your PC, Laptop or any other USB power. The LED light will be in red during charging process, and it will turn off when charging completed. Please fully charge the headphone before your first time using.
- Press the Power button for 3 seconds until you hear “Power on and enter the automatic pairing mode (The bluetooth headphone can remember devices paired previously). You may simply turn on the headphones and the device (with bluetooth activated), and they will conneted to the last devices automatically without going into the pairing mode. Press the Power button for 3 seconds until LED light in blue/red alternati-vely and sound of “Pairing occurred”. Open your Bluetooth equipment and find the model of “Vieta Pro Gently” in your list, then click for paring until you hear “Paired”.
- Power off: Press the MFB for about 3 seconds until you hear “Power off”.
Specifications
Basic index
Dimensions: 40mm
Rated power: 320
Frequency: 10mW
Impedance: 20Hz-20KHz
Sensitivity: 112dB+3dB
Microphone
Size: 44.0X1.5mm
Sensitivity: -42+3dB
Bluetooth
Bluetooth chip: CSR8635
Bluetooth version: 5.0
Support protocol: HSP, HFP, A2DP and AVRCP
Battery capacity: 3.7V 400mAh
Standby time: 250h
Conversation time: 15h
Music Playing time: 16h
A) Mute call: Press V+ & V- at the same time to mute sound during voice
call. B) Alternating call & music: Press V+ twice to transfer between
Bluetooth and phone mode during voice call.
C) Siri/Google voice assist: double click on MFB to activate Siri for IOS
devices or Google Assist for Android devices.
Note
- Please do not listen for a long time at a high volume to protect your hearing.
- Prevent severe vibration,impact or extrusion and also prevent sun and rain.
- The headset should be stored in a clean,dry and ventilated room with an environment of -40 C -45 C and a relative humidity of not more than 75%. Avoid contact with corrosive substances and keep away from fire sources.
- The headphone should not be disposed of as household waste. And must be taken to the appropriate waste battery collection point for disposal.
- The headphone contains a lithium battery. It is forbidden to disassemble it.
- It is forbidden to disassemble, squeeze, puncture the product or put it into water, fire or exposed to an environment with a temperature higher than 60°C.
- The company will bot bear any legal responsibility if damage caused by the consumer’s violation of the above warnings.
Disposal Information
The symbol above indicates that this product and/or battery should not be
disposed of with household waste. When you decide to dispose of this product
and/or its battery, do so in accordance with local environmental laws and
guidelines.
Safety information
Warning: To avoid hearing damage, do not listen at high volume levels.
- Avoid dropping
- Do not disassemble
- Do not submerge in water
- The product shall not be exposed to dripping or splash.
- Avoid extreme temperatures.
- The product shall not be exposed to excessive heat such as sunshine, fire or the like.
- Use original or certified cables.
- Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
- Do not use the product outdoors during thunderstorms.
- Keep out of reach of children. Small parts included may be a choking hazard.
Limited Warranty
VIETA PRO products are backed by a 2-Year Limited Warranty against defects in materials and workmanship from the date of original retail purchase. Please contact us at support@vietapro.com (Americas only).
Contact
EUROPE:
FRAMASON AUDIO, S.A.
Website: www.vietapro.com
Address: Av. de Pau Casals 7, Entresuelo 2- 08021 Barcelona, Spain
Phone: +34 93 116 24 91
Email: info@vieta.es
AMERICAS:
Belisa, LCC (Importer and Distributor in USA).
Website: www.vietapro.com
Address: 6420 Rea Road Suite Al #252, Charlotte, NC 28277 USA.
Email: support@vietapro.com
Declaration of conformity
Issuer’s name: FRAMASON AUDIO S.A
Address: Av. de Pau Casals 7, Entresuelo 2- 08021 Barcelona (Espana)
Tel: +34 93 1162491
CIF: A62829841
We declare under our own exclusive responsibility that the product:
- Description: Wireless Earphones
- Brand: Vieta Pro
- Model: VHP-BT499
- Manufacturer: FRAMASON AUDIO S.A
- Manufacturing country: China
referred to in this declaration is in compliance with the essential norms and standards
EN 55032:2015
EN 55035:2017
in conformity with the provisions of the Directive 2014/30/UE of the European Parliament and of the Council of 29 de March of 2014.
Barcelona 1 November de 2020