VIETA PRO RVJ7000 Mute Earphone User Manual

VIETA PRO RVJ7000 Mute Earphone

Thank you for purchasing the Mute earphones RVJ7000. To ensure correct operation, please read this manual carefully before use.

VIETA PRO

This product has been developed under the VIETA PRO quality standards. For over 60 years, since its foundation in 1954 by the Vieta brothers, Vieta has always been guided by the motto “Love and respect for the art of music”. It has thus achieved a privileged position in the electronics market, with constant effort and generous doses of passion.
The VIETA PRO models are based on professional sound standards, where quality, durability and sound are above those in commercial products of consumer electronics. They have been developed by the prestigious engineer “Jordi Hernandez”, with more than 40 years in the sound industry. Under his expert direction, the VIETA PRO models are manufactured with the most precise components, producing the purest VIETA PRO sound.

Bluetooth earphones should be used with compatible devices which supports Bluetooth wireless technology.
This will allow you to make calls and enjoy music freely at any time.
Make sure that your equipment has an updated Bluetooth 5.1 protocol to correct communication with new earphone technologies and to be able to be used.

Please read this user manual carefully before using the product as your smartphone’s manual regarding the use and activation of the Bluetooth function.
Pay attention to the device safety and maintenance recommendations and for safety reasons, keep the product out of the reach of children. Keep it in a safe place for future reference.

Safety Information

a. There are voltage zones inside this unit that can cause injuries. Please do not open the unit. In case of technical failure, please contact the authorized service center.
b. Never place the unit in the rain or in moist zones so as to avoid a fire or an electric shock.
c. If technical maintenance is required, please contact the authorized service center.

Caution

a. Do not place the unit on an unstable surface as it may fall and break or cause damage to people or pets.
b. Disconnect the unit from the mains before cleaning it. Do not use cleaning liquids or sprays. Use only a soft, damp cloth.
c. To avoid possible damage to the equipment, please unplug it during storms or when it will not be used for a long time.
d. Do not insert any object into the unit through the loading ports as this could cause a short circuit and start a fire. Do not pour liquid on the earphone.

Power On and charging

a. Fully charge the built-in battery before using for the first time, which will prolong the battery lifespan.
b. Check on LED display the battery information to see the remaining battery level when it is turned on.
c. Battery icon on LED Display informs about the level of the percentage of charge it has.

1. Put the earphones inside the charge box.

2. Connect your smartphone’s power adapter SV to charge box using USB Type C cable (included in the pack).

3. Verify that the charge box is charging: LED Display show the blinking charge.
   If the charging box is turned off due to running out of battery, the screen will take between 3 or 5 minutes to enter the charging state.

4. The LED Display informs about the battery percentage. When it reaches 100%, you can disconnect the USB Type C cable.

5. Keep save the earphones into the charge box to will charge. It’s recommended leave it for 1 -2 hours, so that the earphones are charged to 100% to remains good them batteries.
   When the battery of the earphones is below 10%, the voice prompt will sound “Low Battery” and you must insert them into the charge box.
   When charge box is below 10% on the LED Display, connect SV power again.

Specifications

Transparency Mode, ANC off.
Audio format| MP2, MP3, WMA. APE, FLAC, AAC, MP4, WAV, AIFF, AIFC audio decoding.

Operations

1

| Sound output hole.
---|---

2

| Control panel.

3

| Charging contacts.

4

| USB Type C Charging port.

5

| Charging box battery level.

6

| Charging box display button.

Key Definition

Power ON| When you remove the earphones from the charging box, they turn on automatically.
---|---
Power OFF| When you insert the earphones in the charging box, they turn off automatically.
When earphones are out of the charging box but remain inactive (standby mode), insert to charging box to turn off and charge it.
If earphone not connected to the multimedia device, it will automatically power off after 3 minutes.
Answer phone Call| One time touch “L” side or “R” side.
Hang Up phone Call| One time touch “L” side or “R” side.
Refuse phone Call| Long touch 2 sec. “L” side or “R” side.
Play/ Pause| One time touch “L” side or “W side.
Increase Volume| Double touch “R” side while playing music.
Decrease Volume| Double touch “L” side while playing music.
Next song| Triple touch “R” side.
Previous song| Triple touch “L” side.
Voice Assistant| Long press “L” side.
Sound Filter Mode| ANC (Active Noise Cancellation), Transparency and Normal Mode. Long touch 2 sec. “R” side.

Earphone pairing mode

1. Once earphones are charged, take it out of the charge box.
2. L/R turn on at the same time when you take them out of the charge box and they will connect to each other automatically and wait for the Bluetooth to be connected.
3. In media device (Smartphone/Ordenador/Tablet), you can search for the reference Vieta Pro Mute and connect them. This procedure is necessary only the first time you connect to the same device. After, If saved the Bluetooth settings on the smartphone, when turn on the Bluetooth in the smartphone, they will connect automatically. It will pair successfully within 3 seconds with and indication sound to show it connected.

If want to use the earphones on another smartphone or media device (computer, tablet, laptop … ) must first unlink the connection they have established.

Sound filter modes

ANC: Active Noise Cancelling; earphones uses a sound analyser and microphone system to lose annoying outside noise and to give comfortable audition experience for the user.

Transparency Mode: in the same way as Active Noise Cancelling, in this mode, the microphone system detects the voice of the person who are speaking outside the earphones, to give to the listener, inside the earphones, a hearing clearly voice, but cancelling the annoying noise outside.

ANC OFF: Noise Cancelling Off. In this case, the earphones give’s to listener an experience without noise cancellation or voice processing.

Important

1. Bluetooth pairing named Vieta Pro Mute.

2. To Power Off when the music is played, place it into the charging box. At the moment, the earphones switches off.
   When the cover of charging box is opened again, it powers on automatically for connection.

3. Connect the mobile phone automatically after earphones power on. If connection cannot be made automatically, disable and enable Bluetooth on media device to find them and pair it. Also, can try inserting and removing the earphones from the charging box to reset them.

4. Please use a SV charger with USB Type C cable included in the pack.

CE Declaration of conformity

Issuer’s name: FRAMASON AUDIOS.A
Address: Av. de Pau Casals 7, Entresuelo 2- 08021 Barcelona (Espana)
Tel: +34 93 1162491
CIF: A62829841

We declare under our own exclusive responsibility that the product:

• Description: Wireless Earphones
• Brand: Vieta Pro
• Model: RVJ7000
• Manufacturer: FRAMASON AUDIOS.A
• Manufacturing country: China

referred to in this declaration is in compliance with the essential norms and standards
EN 55032:2015
EN 55035:2017
in conformity with the provisions of the Directive 2014/30/UE of the European Parliament and of the Council of 29 de March of 2014.

Barcelona 1 November de 2020

|

Carlos Alberdi
Product Manager

|
---|---|---

www.vietapro.com

Documents / Resources

| VIETA PRO RVJ7000 Mute Earphone [pdf] User Manual
RVJ7000, Mute Earphone, RVJ7000 Mute Earphone, Earphone, Earbuds
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>