PYLE PRJTPOTS101 Outdoor Projector Screen User Guide
- June 11, 2024
- Pyle
Table of Contents
PYLE PRJTPOTS101 Outdoor Projector Screen User Guide
Features
- Indoor/Outdoor Projector Screen
- Lightweight & Portable Display + Frame Stand
- Triangular Prism Design for Wind Stability
- Hassle-Free Setup for Quick Projection
- Matte White Fabric for Optimal Color Pickup
- Home Theater Style: HD Wide-Angle Viewing
- Used for Home, Offce & Business Applications
- *Some Assembly Required
What’s in the Box
- Projector Screen
- Mounting Frame Stand
- Travel/Storage Bag
Technical Specs
- Projector Viewing Screen Size: 100’’ -inch, Diagonal
- Aspect Ratio/Viewing Format: 16:9 Compatible
- Wide-Angle Viewing Area: 160° Degree
- Screen Gain: 1.15
- Projector Fabric Thickness: 0.012’’ inches (0.3mm)
- Construction Material: Engineered Steel Alloy Frame
- Assembled Dimensions: 88.1’’ x 75.5’’ x 76.3’’ -inches
Note:
Care should be taken to prevent the screen from getting dirty during assembly.
This is easier with two people.
Assembly
Install the tube connection for the bottom triangle.
Install the Vertical tube
Insert the metal frame into the 3 Way Pipe Fittings. The tube must be fully
inserted into the 3 Way Pipe Fittings as much as possible.
Use the metal clip to attach the screen on the top bar then use the zip tie to
go through the hole and fix the screen on the top bar.
Zip tie goes into the hole and fix it on the tube. Don’t strap the zip tie too
tightly in the beginning.
Pay Attention
- Assemble the bottom triangle first, then attach the three uprights to make the top triangle. It is designed intentionally to assemble the last triangle with diffculty in order to make the angle to be tensioned and not get loose.
- The screen wil have some wrinkle due to the rolling up, it will recover after a while when you tension the screen with zip tie.
- Please don’t cut the zip tie as you may re-use it next time.
- This zip tie can be released again just by pressing the switch.
- When all the zip ties are fixed, you can tighten it gradually to make the screen as at as possible.
- The metal clip is used to attach the screen on the top bar. You can leave the metal clip on or remove it.
- There are two pairs of gloves so it is better to have two person to assemble this screen.
- Don’t tighten the screen too much; otherwise, the screen will be torn.
- If the screen is dirty, you can clean it with a white cloth; the screen is not suitable for machine washing.
- The screen can be used indoors or outdoors, but it is not waterproof. You cannot display it outside for a long time as the black edge around it will be damaged by water.
- Once you done using the Outdoor Projector Screen, use the zip tie to strap the stand and store it with the screen in the Storage Bag.
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>