VIETA PRO VHP-TW21 Unseen 2 True Wireless Earphones Instruction Manual

VIETA PRO VHP-TW21 Unseen 2 True Wireless Earphones

This product has been developed under the VIETA PRO quality standards. For over 60 years, since its foundation in 1954 by the Vieta brothers, Vieta has always been guided by the motto “Love and respect for the art of music”. It has thus achieved a privileged position in the electronics market, with constant effort and generous doses of passion. The VIETA PRO models are based on professional sound standards, where quality, durability, and sound are above those in commercial products of consumer electronics. They have been developed by the prestigious engineer “Jordi Hernandez”, with more than 40 years in the sound industry. Under his expert direction, the VIETA PRO models are manufactured with the most precise components, producing the purest VIETA PRO sound.

Product Diagram

Product specifications

• Model: Vieta Pro Unseen 2
• Bluetooth® Version: JL VS.0
• Blueooth® range: 10 meters
• Charging case battery: 400mAh Earphone battery: S0mAh
• Playback time: 5-6 h
• Standby time: more than 200 h Charging time: 1-2 h
• Charging box voltage: DC SV Supported phone systems: iOS, Android

Key Definitons

Power on

Power off

| When the earphones are removed from the case, they will automatically turn on and sync to each other.

The earphones will automatically power off when placed back in the charging case.

---|---
Answer call| Press once L side or R side.
End call

Reject the

1. ncom1. ng calls

| Press once L side or R side.

Press and hold (2 seconds) L side or R side.

Play/ Pause|

Press once L or R side.

Increase Volume| Press and hold R side while playing music.
Decrease Volume|

Press and hold L side while playing music.

---|---
Skip Forward|

Press twice R side.

Skip Backward

|

Press twice L side.

Wake Up Voice Assistant|

Triple tap Lor R side.

Charging mode

Charging Mode

| Placing the earphones in the charging case will automatically switch them off, and the charging process will start. While charging the red LED light indicator will be on, and will turn off after charging is finished.
---|---

Charging Case

|

The white LEDs on the charging case will light successively until all four lights are on, when the charging is completed. When the charging case is disconnected, the power indicator light will switch off.

Low Battery

| When the battery voltage drops below 3.3V a beep indicating low battery will sound and a red LED light will flash for 20 seconds. Please charge then. When the battery voltage drops below 3.0V it will switch off the device.

Battery Display

|

After connecting an iOS device, it will show the battery power indicator of the earphones.

Earphone pairing and Bluetooth connection

If you just remove from the charging case either the Lor the R earphone,

Single           it will activate the single earphone

Earphone pairing mode. The procedure to pair Pairing Mode with the mobile phone is the same

as in the “Two earphones pairing mode”.

| ****

The red and blue light flash.

---|---
L/R will turn on at the same time when removed from the charging

Two case, and will Sync to each other. To

Earphones       pair the earphones with your mobile Pairing Mode      phone, select and tap on the

Vieta Pro Unseen 2 reference from your Bluetooth menu. This procedure is only necessary the first time you connect to the same device.

| ****

The red and blue light flash.

TWS pairing mode

| When the earphones are removed from the case they will automatically turn on and sync to

each other.

---|---

Mobile Phone Bluetoo th® Connection

| ****

Scan for Blueto o th ® devices from your phone, then select and tap on “Vieta Pro Unseen 2.”

Reconnect to Bluetooth   ®

| ****

Left and right earphones will automatically reconnect to each other when switched on. The main earphone will also reconnect to the phone.

The earphones and phone Blueto o th ® connection will be reestablished if the time out of Bl ueto oth® range is less than 5 minutes.

Remarks

1.  Bluetooth® pairing name or reference: Vieta Pro Unseen 2.
2.  If you place the earphones in the charging case while music is playing, they will be disconnected from the phone and switched off. When opening the cover of the charging case again, the earphones will switch on and pair automati­cally with the phone.
3.  If earphones and phone do not connect automatically, press the power on key.
4.  If the earphones cannot connect to the mobile phone, reboot and connect again.
5.  Please always use a 5V charger.

FCC STATEMENT

Disposal Information

The symbol above indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines. Trademarks The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. “Android” is a trademark of Google Inc. “Apple” is a trademark of Apple Inc.

Safety information

•  Avoid dropping
•  Do not disassemble
•  Do not submerge in water
•  The product shall not be exposed to dripping or splash.
•  Avoid extreme temperatures.The product shall not be exposed to excessive heat such as sunshine, fire or the like.
• Use original or certified cables.
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.\\
• Do not use the product outdoors during thunderstorms.
• Keep out of reach of children. Small parts included may be a choking hazard.

Limited Warranty

VIETA PRO products are backed by a 2-Year Limited Warranty against defects in materials and workmanship from the date of original retail purchase. Please contact us at support@vietapro.com (Americas only).

Contact

• EUROPE:
• FRAMASON AUDIO, S.A.
• Website: www.vietapro.com
• Address: Av. de Pau Casals Z Entresuelo 2- 08021 Barcelona, Spain
• Phone: +34 93 116 24 91
• Email: info@vieta.es
• AMERICAS:
• Belisa, LCC (Importer and Distributor in USA).
• Website: www.vietapro.com
• Address: 6420 Rea Road Suite Al #252, Charlotte, NC 2827Z USA.
• Email: support@vietapro.com

CE Declaration of conformity

• Issuer’s name: FREEMASON AUDIO S.A Address: Av. de Pau Casals 7, Entresuelo 2- 08021 Barcelona (Espana) Tel: +34 93 1162491
• Cl F: A62829841

We declare under our own exclusive responsibility that the product:

•  Description: TWS Earphones
•  Brand: Vieta Pro
•  Model: VH P-TW21
•  Manufacturer: FREEMASON AUDIO S.A
•  Manufacturing country: China referred to in this declaration is in compliance with the essential norms and standards
• EN 62479:2010
• EN 50332-1:2013
• EN 301 489-1 V2.2.0
• EN 301 489-17 V3.2.0
• EN 300 328 V2.1.1
• EN 609 50-1: 2 0 06+A11: 2 0 09 +A1: 2 010 +A12: 2011 +A2: 2013 in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 29th March 2014.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>