DICKIE TOYS 201108003 RC Badland Explorer Instruction Manual
- June 20, 2024
- DiCKiE TOYS
Table of Contents
Operating instructions
RC
BADLAND EXPLORER20 110 8003
MODUL 24098 / 2,4 GHz
DICKIE SPIELZEUG GmbH & Co. KG
Werkstr.1
90765 Fürth
Germany
www.dickietoys.com
201108003 RC Badland Explorer
Match Procedure :
- Turn the vehicle ON, then turn the transmitter controller ON within 30 seconds.
- If pairing is unsuccessful, turn the vehicle and controller OFF and try again.
- When playing with multiple vehicles, only pair one controller to one vehicle at a time in order to avoid interference.
Auto sleep mode
After idling for 3 minutes, controller or vehicle will start to sleep. Please
switch “Off” and “On” to resume the function.
Precautions (Please retain!)
- WARNING! Not suitable for children under three years. Risk of choking due to small parts that may be swallowed! Please keep this packaging information for any possible correspondence. Subject to technical change and change of color. Adult help is required to remove the securing devices.
- Never lift the vehicle up while the wheels are still turning.
- Keep fingers, hair and loose clothing clear from the motor or wheels when the vehicle is switched to “ON”.
- To prevent accidental operation of the vehicle, batteries and power packs must be removed from the toy when not in use. Hot surface hazard.
- To avoid accidental operation the vehicle should be switched on before the transmitter. When switching off, always switch ff the vehicle and then the transmitter.
- If the vehicle does not respondfafter switching On, then switch Off both the vehicle and transmitter and On again. Please also check if full batteries are installed properly into the items.
- To obtain the best result we recommend using only alkaline batteries or rechargeable battery packs with the vehicle.
- Check charging unit regularly for damage. In case of damage the charging unit must not be used until it has been fully repaired. The charging procedure must only be undertaken in dry areas; protect unit from damp.
- We are not responsible for any loss of data, or damage to software, or other damage to computer or accessories caused by battery charging.
- Wires are not to be inserted into socket-outlets.
- The toy is only to be connected to Class II equipment bearing the following symbol.
- Warning: For the purposes of recharging the battery, only use the detachable supply unit provided with this toy.
- The power supply is not a toy .
- Misuse of the power supply can cause electric shock.
- The toy shall only be used with a power supply for toys.
- Toys liable to be cleaned with liquids are to be disconnected from the transformer or power supply before cleaning.
- This toy contains batteries that are non-replaceable.
Warning:
The manufacturer is not responsible for any radio or television interference
which might be caused by unauthorised modifications to this equipment.
Modifications of this nature may invalidate the user’s consumer rights.
Declaration of conformity
With directive 2014/53/EU (RED). Dickie-Spielzeug GmbH & Co. KG hereby declares that the item conforms with the standard requirements and the other relevant regulations stipulated in directive 2014/53/EU. The original declaration of compliance can be viewed on the Internet at the following URL: http://www.simba-dickie-group.de/de/konformitaetserklaerungen.shtml
Service:
If the product malfunctions, please do not hesitate to contact the sales outlet where you bought the toy. If they are unable to help you, please use our Internet service at service.dickietoys.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>