AM Alphamount Monitor Desk Mount Instruction Manual
- June 7, 2024
- AM Alphamount
Table of Contents
- IMPORTANT SAFETY INFORMATION
- Parts and Hardware Included
- Step 1 Installation Method
- Full Adjustment after Installation
- Step 2 Directional Usage Guide
- Step 3 Power and Display Lines Installation
- Step 4 Attach Monitors to the Arms
- Step 5.Adjust Gas Spring Tension
- Step6. Setting Tilt Angles
- Step 7 Setting Swivel Tightness
- Step 8 Display Rotation
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Monitor Desk Mount Instruction Manual
V1.0
Model: APSS6B
IMPORTANT SAFETY INFORMATION
Do not install or assemble if the product or hardware is damaged or missing,
if you require replacement parts, please contact customer service at
support@alphamount.com.
For safe installation, the desk you are mounting to must support a minimum of
3 times the weight of the total load (the mount, the monitor, and all
accessories weight). Don’t use the product on particleboard This product
contains a high-pressure gas spring, fire, and percussion is prohibited. Also,
it is strictly prohibited to dismantle without professionals. Please return to
the manufacturer or hand it over to professional agencies if the product is
abandoned.
Parts and Hardware Included
Step 1 Installation Method
A.Table Edge Installation
Warning: Ensure screws are secure firmly.
B.Grommet Installation
Warning: Ensure screws are secure firmly.
Full Adjustment after Installation
Step 2 Directional Usage Guide
Step 3 Power and Display Lines Installation
Step 4 Attach Monitors to the Arms
Step 5.Adjust Gas Spring Tension
Notes: Ensure display weight is within load range.
- If the monitor can stay at the desired height by itself, no adjustment is needed.
- If the monitor rises up, press the arm to keep it in a horizontal position and then use the 5mm Alley key (F) to turn clockwise(“-” direction) to reduce the tension of the arm only until the monitor can stay at the desired height by itself.
- If the monitor falls down, lift the arm to keep it in horizontal position and then use the 5mm Alley key (F) to turn the screw counter-clockwise(“+” direction) to increase the tension of the arm only until the monitor can stay at the desired height by itself.
Step6. Setting Tilt Angles
Step 7 Setting Swivel Tightness
Warning: Do not fully re-thread screw.
Step 8 Display Rotation
TENSION ADJUSTMENT SHOULD BE DONE ONLY AFTER MOUNT INSTALLATION
Warning: Do not adjust tension without display.
- Ensure display has been attached to the mount.
- Read your display packaging or manual to find out display net weight. 3.Ensure the net weight of the display (including accessories) is between 4.4-14.3 lbs(2.0-6.5 kg).
Thank you for choosing this alpha mount product! Atalphamount, we strive to
provide you with the best quality products and services in the industry.
Should you have any issues, please don’t hesitate to contact at
support@alphamount.com (US/CA)
supporteu@alphamount.com(DE/UK/FR/IT/ES/AU)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>