V-TAC VT-6076S LED Waterproof Fitting Lamp Instruction Manual

: August 21, 2024
: V TAC

Table of Contents

V-TAC VT-6076S LED Waterproof Fitting Lamp
Product Usage Instructions
TECHNICAL DATA
INTRODUCTION & WARRANTY
INSTALLATION INSTRUCTION
Documents / Resources

V-TAC VT-6076S LED Waterproof Fitting Lamp

Specifications

Model: VT-6076S
SKU: 2162821, 2162831
Watts: 18W
Lumens: 2160 Lm
Beam Angle: DF 0.7
CRI: 80
Input Power: AC:200-240V, 50/60Hz
Life Span: 25,000 Hours
On/Off Cycle: >15,000 Times
Max Connectable Units: 16
Driver MA (Input Current): 100mA
Material: PC
Dimensions:
- 600x66x58mm for 8 units
- 1200x66x58mm for 6 units
- 1500x66x58mm for 6 units

Product Usage Instructions

Introduction & Warranty
This LED waterproof lamp fitting is designed to provide bright and efficient lighting. It should not be disposed of with household waste. Caution: risk of electric shock. For warranty queries or issues, contact support@v-tac.eu.

Installation Instructions

Switch OFF the power before starting the installation.
Fasten the two mounting clips to the installation surface.
Open the end cap and take out the connector.
Link the lamp to the power source.
Cover the back end cap.
Install the lamp to the mounting clips.
For hanging installation, refer to the provided instructions.
Switch ON the power to test the light.

Linkable Connection
To connect multiple units together, follow the provided guidelines for linkable connection.

Frequently Asked Questions (FAQ)

Q: Can the light source of this luminaire be replaced?
A: No, when the light source reaches its end of life, the entire luminaire should be replaced.
Q: What should be done if the external cable is damaged?
A: If the external cable is damaged, it should be replaced exclusively by the manufacturer, service agent, or a qualified person to avoid hazards.
Q: What is the recommended maximum number of units that can be connected?
A: The maximum connectable units for this lamp fitting is 16.

INSTRUCTION MANUAL
LED WATERPROOF LAMP FITTING

TECHNICAL DATA

MODEL	VT-6076S	VT-1249S	VT-1574S
SKU	2162821, 2162831	2162841, 2162851	2162861, 2162871
WATTS	18W	36W	48W
LUMENS	2160 Lm	4320 Lm	5760 Lm
BEAM ANGLE	120°	120°	120°
DF	≥0.7	≥0.9	≥0.9
CRI	≥80	≥80	≥80
INPUT POWER	AC:200-240, 50/60Hz	AC:200-240, 50/60Hz	AC:200-240, 50/60Hz
LIFE SPAN	25,000 Hours	25,000 Hours	25,000 Hours
ON/OFF CYCLE	>15,000 Times	>15,000 Times	>15,000 Times
MAX CONNECTABLE UNITS

16

|

8

|

6

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.

This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.

MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.

In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

WARNING

Please make sure to turn off the power before starting the installation.
Installation must be performed by a qualiﬁed electrician.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
If the external ﬂexible cable or cord of this luminaire is damaged, it shall be exclusive-ly replaced by the manufacturer or his service agent or a similar qualiﬁed person in order to avoid a hazard.
Terminal block not included. To be connected with Waterproof Cable Hose

INSTALLATION INSTRUCTION

Switch OFF the power before starting the installation.
Fasten the two mounting clips to installation surface.
Open end cap and take out the connector (FIG 1).
Link to power source (FIG 2).
Cover back end cap
Install the lamp to the mounting clips (FIG 3).
Hanging installation type reference (FIG 4).
Switch ON the power to test the light.

LINKABLE CONNECTION

Documents / Resources

| V-TAC VT-6076S LED Waterproof Fitting Lamp [pdf] Instruction Manual
VT-6076S, VT-6076S LED Waterproof Fitting Lamp, LED Waterproof Fitting Lamp, Waterproof Fitting Lamp, Fitting Lamp, Lamp
---|---