VIETA PRO MVR04Beat 4 Smartwatch User Manual

PRO MVR04Beat 4 Smartwatch
User Manual

Have a problem with your product?
Contact us at Email: service@vieta.es

Thank you for purchasing the Beat 4 Smartwatch MVR04.
To ensure correct operation, please read this manual carefully before use.

The adaptation platform requirements

Android 4.4 and above support.
iOS 9.0 and above support.
Bluetooth 3.0 and Bluetooth 4.0

App download method

1. can the QR with your smartphone to access to WearPro application
   http://dt1pro.cn/app-download/wearpro/index.html

2. Android/Apple:
   Android: search for “WearPro” through the software application (Google Play Store) to download and install the application.
   Apple: search for ” WearPro ” through the software application (Apple App Store) to download and install the application.

www.vietapro.com

IMPORTANT: The recommended WearPro app version for Android and iOS is 1.7.3.
IMPORTANT: Please instead of pairing from smartphone “Bluetooth” settings, follow the steps described on “How to pair” (to get all the Bluetooth communication between the smartphone and watch).
NOTE: The user can customize the wallpaper of the smartwatch with “The WearPro” application. To do this, look for information in the application’s user manual.

Care for Vieta Smart Beat 4 before using

To ensure the normal use of a smartwatch, please charge it before using it for the first time.
Please use a matching charging cable to charge, and connect the charging points on a bracelet with the pin on the charger following the correct position.
For charging the smartwatch, please plug the USB end of the charging cable into the USB port of a standard phone charger, desktop, or laptop computer with a standard 5V  output. Not recommended to charge using a power bank as the output voltage is not of standard 5V.

On the smartwatch screen, the charging process will be displayed, showing the battery status. Once charged it, the full battery will be displayed as full of charge.
It’s not possible to set the time of the smartwatch without synchronizing with the Smartphone because the watch time always shows the same as Smartphone has. If you set the time on your Smartphone, it will automatically sync to the smartwatch.
NOTE: The battery consumption of the smartwatch is higher when it remains connected and synchronizes data with your smartphone.
Therefore, it’s recommended to keep it disconnected when you finish to use between them.

Charging instructions

Connect the magnetic connector into the charging position as shown in the figure below, using a smartphone charger 5V/1A.

Pair the Vieta Smart Beat 4 with your smartphone

Turn on the smartwatch; press and hold the right button for many seconds to turn the device on (and o).
Verify that your smartwatch is not connected to another smartphone before connecting your smartphone. Otherwise, as the smartwatch is already connected to another smartphone, you will not be able to connect yours. To verify this, on the main watch screen, slide your finger from top to bottom to access the center of the basic setting, and check that the pairing icon is grey [Bluetooth unpaired (Disconnected)], indicating that there is no active pairing.

In case this icon appears green, unlink the smartwatch from the Smartphone to which it’s connected, and thus have a free connection on your watch to make the pairing process with your smartphone.
Available the Bluetooth on your Smartphone. Active your GPS on the smartphone.
Go to Bluetooth settings on your Smartphone, to wait for the smartwatch reference, which will appear following the next step.
On your smartwatch Beat 4, on the main screen, swipe from bottom to top to access the app center and select the “Call” application. Press on “Open” and will activate the Bluetooth.

Search on your smartphone the reference that will appear on the call application on the smartwatch Beat 4, as Vieta Beat ####. Select this reference, and keep the permissions that require to pair between them.

IMPORTANT: This Bluetooth pairing procedure is to be able to perform Calls, Music, Notifications, and matters not related to the use of the wear application.
When you have done this pairing, you will not be able to use a Bluetooth headset or any audio player device on your smartphone. All Bluetooth calling smart watches meet this point.

After pairing the smartphone with the smartwatch, access the WearPro application (previously downloaded from Android Google Play or iOS Play Store).
Access the “Devices” section, select “Link Device Now”, and on the devices screen select “Search” (in the upper right corner). Then, select “Synchronize data” to share information.

The “Smart Watch Beat 4” will appear in the device list. Verify that the MAC address is the correct one with your watch. To do this, access the center of the basic setting on your  watch and click on

IMPORTANT: Before the entire pairing process between Vieta Smart Beat 4 and your smartphone, it is important that you have activated the GPS location of your smartphone, in order to start the pairing process.

Start-up functions of Vieta Smart Beat 4

Smartwatch right side button: use this button to;

• Power ON/OFF: Press and hold the button for many seconds to turn ON/OFF the device.
• Rotate to change the wallpaper: rotate up and down the button located on the right side of the watch, to select the different wallpapers and appearances of the Vieta Smart Beat 4.
• Return to the main screen: when you are in an application of the smartwatch, pressing the button, you will go back to the main screen of the device, thus exiting the application that you were previously viewing.

When you are inside any application, if you slide your finger from left to right, you can go back to the previous screen (without having to press the side button on the watch to go back to the main screen).
Smart Watch Display;
By swiping from left to right, or from top to bottom, different function menus will appear and become accessible by further selection.

These wallpapers can be selected by rotating up and down the button located on the right side of the watch, to select the different wallpapers of the Vieta Smart Beat 4.

Applications center: from the main screen, swipe from down to up to access the all applications directory; find my smartphone, Alarm, Call log, Contacts, Calendar, Sound,  Notification center… To exit from this directory, briefly press the right button on the Vieta Pro Smartwatch Beat 4.

Quick access to the recent application desk: from the main screen, swipe from left to right to access to a desk where you will have the recent application executed on the watch. Also, will appear quick access to the Notification center and Call app. To exit from this directory, briefly press the right button on the Vieta Pro Smartwatch Beat 4, or slide from right to left.

Quick access to basic settings: on the main screen, swipe from top to bottom to top to access the quick access to Information, Vibration (ON/OFF), Connected/Disconnected, Brightness, Battery status, and Media Player.

Vibration: this option disconnects Bluetooth 3.0 (Bluetooth related to calls and notifications). Remember that if you select this button after reactivating the vibration, you will have to repeat the pairing process described above, with your Smartphone.

Quick access to applications: on the main screen, swipe from right to left to access your favorite applications, which you must choose in this same menu so that they appear when you access them here.

Swipe down on each screen to access the history of each application and data from previous days.

Introduction to the Application Center

| It’s necessary to have paired with WearPro on your Smartphone to be able to use this application.
Sport: Step monitoring and sports training. [1]
---|---
| Heart rate: Pulse monitor with the heart rate sensor. [1]
| Sleep Monitor: Sleep stages and quality monitoring. [1] It’s necessary to have paired with WearPro on your Smartphone to be able to use this application.
| Pedometer: Steps count data collected from a smartwatch. [1] It’s necessary to have paired with WearPro on your Smartphone to be able to use this application.
The number of the steps shown on the watch will be reset to 0 whenever it’s synchronized with your Smartphone.
| Remote notifier: Application notification center of your smartphone. [2] Check through the settings of your Smartphone, so that the access permissions to your watch are enabled and accepted, to be able to view the notifications you will receive on your Smartphone through the watch.
| Multi Styles: Select the “Application Center” view mode.
| Call logs: Access the “Call history” of your smartphone. [2]
| Music: Select and play your music on your smartphone.
Listen to the music of your Smartphone on the watch.
speaker of your smartwatch, not through the earphones or speaker
To do this, first your smartphone must be playing music. then open the music app on your watch Beat 4, otherwise, you will not be able to play music.
The music is played through built-in Bluetooth.
| Find my device: Locate your smartphone from the smartwatch.
It’s necessary to have paired with WearPro on your Smartphone to be able to use this application.
| Settings: Language, Screen time, Vibration intensity, Bluetooth phone, Password, Factory reset.
| About: Vieta Smart Beat 4 product information and obtain the QR code.
| Home Screen: Return to the main screen of the smartwatch.
| Dialler: Numeric keypad and call using your smartphone. [2] When you answer or make a call through the smartwatch, you must speak and listen through the speaker and microphone built into the smartwatch  (you cannot do it through earphones). If you want to have it through your Smartphone, you must perform the actions on your Smartphone and not on your smartwatch.
You need to access this application to be able to make the Bluetooth link to your smartphone (described above).
| Phonebook: Phone contacts from your smartphone. [2] To import the contacts, go to the WearPro application> Device> Frequent contacts on your Smartphone.
| International or Language: Language selector and settings.
| Breathing: Application designed for relaxing, performing deep breathing following the steps; breath in for the seconds the watch vibrates, breathe out for the next few seconds.
| Wrist relaxation: Activate the vibration of your smartwatch to massage your wrist.
| Vibration: Activate or deactivate the vibration of your smartwatch that runs when performing actions (Notifications, Incoming calls…).
| Power O: shutdown the Vieta Smart Beat 4.
| Factory reset: restore factory settings.
| Stopwatch: allows you to time the time.
| Screen on timer: Increase or decrease the amount of time the screen stays on.
| Weather: shows what weather is in the day. It must be paired with the phone to have this information available on your watch.
| Electrocardiogram: BPM heart meter.
| Watch patterns: Change the wallpapers on the main clock screen.
You can customize your wallpaper from the wear application.
| Female application: control your menstrual cycle more easily through this app.
Available only on Female profile (“Me” on WearPro settings).
Set on the WearPro app your preferences and watch will show the status each day.
| Meteorological: information on UV intensity and air pressure.
| Calculator: calculator that allows you to add, subtract, multiply and divide.
| Password: set a password to protect your smartwatch.
| Your QR Code: through WearPro, import in this section your QR code identifier of your social network, chat, … and thus always carry it on your watch so that it can be scanned by your acquaintances.

IMPORTANT: In the application viewer settings “Gallery” and “Mosaic” all applications are displayed. For the other styles, only the most common are shown.

1. You can view the stored data of each application; open the application that you want to know and slide your finger from down to up.
2. Applications notification center, dialler, call logs, phonebook.

It’s important to follow the correct steps in Bluetooth pairing;

1. Pair the Vieta Smart Beat 4 in your smartphone’s Bluetooth settings (on your smartphone). Remember to access the call application on your smartwatch, to enable communication between both devices.
2. Find the watch and pair it in the wear app.
3. Synchronize data through WearPro.
4. Allow and validate accessibility permissions on your Smartphone (in Smartphone Security).

Customize your wallpaper

The Vieta Smart Beat 4, has some wallpapers of the smartwatch that are editable, and therefore customizable through the wear app.

1. Press and hold on to the main watch display.
2. When the wallpapers appear selectable, slide your finger from left to right on the watch screen to select the editable wallpaper.
3. Select the editable wallpaper.
4. In the wear application, under “Device”, follow the steps to edit your wallpaper (for more information, access the WearPro application manually on the manufacturer’s website).

Caution

Vieta Smart Beat 4 is designed with IP67 water resistance. It can be in contact with water in rainy conditions or washing hands, but not suitable for submerging under water,  showering or swimming.
Synchronize the data every time that you want to access any management and to access any services of the Vieta Smart Beat 4.
Always use the charging cable to charge on this device included on the box, and not cables from other products.
It’s recommended to keep the smartwatch bracelet out of places with humidity or extremely high/low temperatures for a long time to avoid damage.
Don’t misuse the rear sensor or look directly into it to avoid possible physical damage.
Please don’t disassemble or open the smartwatch to avoid physical damage.

Vieta Smart Beat 4 maintenance

Protect the bottom sensor of your smartwatch.
Clean the surface of the smartwatch with a dry cloth. Be very careful if you use soapy water for cleaning (don’t use plenty of water) to remove oil or durst.
Don’t expose the smartwatch to environments with strong chemicals; gasoline, propanol, alcohol, or insect repellent. Chemicals will damage the smartwatch and the surface damages.
Avoid letting your smartwatch be subject to strong impacts and exposure to extremely high temperatures.
Don’t disassemble the smartwatch, will lose its water resistance.

Common solutions guide

Cannot pair the smartwatch?
Make sure the smartwatch is turned on and activated, and that it’s not linked to another smartphone. Place the smartwatch near the mobile phone and search again. If it’s still invalid, turn o the Bluetooth of the smartphone for 20 seconds. Then, restart the Bluetooth and search it again.

Should the Bluetooth connection always be active? Will there be any data if it’s closed?
Before syncing the data, the exercise and sleep data will be saved in the smartwatch storage. When the smartphone and the smartwatch make the Bluetooth pairing successfully,  the smartwatch will automatically upload data to the smartphone. Please, note that the data stored by the smartwatch is limited, and it can only be stored for about a week.
When the space is full, the first data will be automatically overwritten to save the last data. Therefore, please sync the smartwatch with your smartphone on time.

Observations: the use of the applications related to the management and configuration of services in your smartphone, requires having the smartwatch linked with your smartphone, if not, they cannot be used.

What should I do if the smartwatch cannot be charged?
Confirm whether the direction of the charger is correct, and the charger is in the correct position contact the smartwatch.
After plugging in the charger, it will immediately enter the charging state. If the smartwatch is turned o ffdue to running out of battery, the screen will take between 3 or 5  minutes to enter the charging state and it will automatically start the watch.
To know the status of the battery, access the “Basic configuration” menu described above.

Remove all information from the smartwatch (Reseat Factory)
If data is stored (phone information…) on the smartwatch, and you want to delete it completely to do a new synchronization with another Smartphone device, in your watch go to Settings and select Reset).
Does wearing the smartwatch for long-time harm the human body?
The radiation from the device is lower than the CE and FCC standards and is the smallest. Long-term use will not cause radiation damage to the human body.

Specifications

Bluetooth headphones connected to the smartphone at the same time as the smartwatch?| Yes.
Display screen.| 1.75 inch.
Chipset.| Realtek 8762D.
Operation temperature.| -10°C to 40°C.
Storage temperature.| -3°C to 30°C.
Storage humidity.| 20%~75%.
Battery.| 180mAh.
Input Power.| 5V/1A.
Net weight.| 50g.

Declaration of conformity

Issuer’s name: FRAMASON AUDIO S.A
Address: Av. de Pau Casals 7, Entresuelo 2- 08021 Barcelona (España)
Tel: +34 93 1162491
CIF: A62829841

We declare under our own exclusive responsibility that the product:

• Description: Smartwatch
• Brand: Vieta Smart
• Model: MVR04
• Manufacturer: FREEMASON AUDIO S.A
• Manufacturing country: China referred to in this declaration is in compliance with the essential norms and standards

EMC
EN 301 489-1 V2.2.0
EN 301 489-3 V2.1.1
EN 301 489-17 V3.2.0
EN 301 489-52 V1.1.0

RF
EN 300 328 V2.1.1
EN 303 413 V1.1.1
EN 300 330 V2.1.1
EN 301 908-1 V11.1.1
EN 301 908-2 V11.1.2
EN 301 908-13 V11.1.2

RoHS: EN50581:2012
EN 50360:2017
EN 50566:2017
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 in conformity with the provisions of the Directive 2014/53/EU, 2009/125/EC and 2011/65/EU of the European
Parliament and of the Council and UL/11716634 of 5th July 2019.
Barcelona March 1st, 2019

www.vietapro.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>