VIETA PRO VHP-BT299 2 Way Headphone User Manual

June 6, 2024
Vieta Pro

VIETA PRO logo Headphones Way 2
VHP-BT299
USER MANUAL

VIETA PRO VHP-BT299 2 Way Headphone

Have a problem with your product?
Contact us at:
Email: service@vieta.es
Thank you for purchasing the Way 2 earphones VHP-BT299.
To ensure correct operation, please read this manual carefully before use.
This product has been developed under the VIETA PRO quality standards. For over 60 years, since its foundation in 1954 by the Vieta brothers, Vieta has always been guided by the motto “Love and respect for the art of music”. It has thus achieved a privileged position in the electronics market, with constant effort and generous doses of passion. The VIETA PRO models are based on professional sound standards, where quality, durability, and sound are above those in commercial products of consumer electronics. They have been developed by the prestigious engineer “Jordi Hernandez”, with more than 40 years in the sound industry. Under his expert direction, the VIETA PRO models are manufactured with the most precise components, producing the purest VIETA PRO sound.
Bluetooth earphones should be used with compatible devices which support Bluetooth wireless technology. This will allow you to make calls and enjoy music freely at any time.
Make sure that your equipment has an updated Bluetooth 5.0 protocol to correct communication with new earpho­ new technologies and to be able to be used.
Please read this user manual carefully before using the product as your smartphone’s manual regarding the use and activation of the Bluetooth function.
Pay attention to the device safety and maintenance recommendations and for safety reasons, keep the product out of the reach of children. Keep it in a safe place for future reference.

Safety Information

a. There are voltage zones inside this unit that can cause injuries. Please do not open the unit.
In case of technical failure, please contact the authorized service center.
b. Never place the unit in the rain or in moist zones so as to avoid a fire or an electric shock.
c. If technical maintenance is required, please contact the authorized service center.

Caution

a. Do not place the unit on an unstable surface as it may fall and break or cause damage to people or pets.
b. Disconnect the unit from the mains before cleaning it. Do not use cleaning liquids or sprays. Use only a soft, damp cloth.
c. To avoid possible damage to the equipment, please unplug it during storms or when it will not be used for a long time.
d. Do not insert any object into the unit through the loading ports as this could cause a short circuit and start a fire. Do not pour liquid on the earphone.

Power On and charging

Fully charge the built-in battery before using it for the first time, which will prolong the battery lifespan.

  1. Connect your Smartphone’s 5V power adapter to the earphones is charging connector using the micro-USB cable (included in the packa­ age).
    You can also charge through your computer’s USB port (the charging process will be slower).

  2. Check that the earphones are charging; the Red LED indicator located on the charging cable connector is activated.
    If the earphones are completely empty of battery, it takes 3 to 5 minutes for this LED to enter the charging state.

  3. A full charge will take around 3 — 4 hours. When it reaches 100% battery, you can unplug the micro-USB cable. Now, the device is fully charged and the Red LED will be in of.

When the battery of the earphones is below 10% battery, the voice prompt will inform “Battery Low” and you should put them to charge it again. Then, connect 5V power and repeat the process described.

Specifications

Model Name Wets Pro Way t.
Bluetooth version Bluetooth 5.0.
Transmission distance 15m.
Earphones battery 900 mAh.
Talking time 30 hours (50% Volume).
Playtime 40 hours (50% Volume).
Charge time 3-4 hours.
Input Power DC 5V/0.5A micro-USB.
Supped phone system 10s, Android.
Audio formats MP2, MP3, WMA, APE, FLAG, MC, MP4, WAV, AIFF, AIFC. Memory Card

audio format supports; MP3, WAV.

Operations and features

VIETA PRO VHP-BT299 2 Way Headphone - Operations and
features

1 Memory Card ITF Card / MicroSD Card) port.
2 Mode;

– Time press to change mode:
Bluetooth mode / FM Radio mode I Memory Card mode /Aux. In. mode. – FM Radio mode: long press 3 seconds to tune channels.
3| Volume + / Next song;
– One-time press to the Next song.
– Long press to increase the Volume.
– FM Radio mode; one-time press to next Radio channel.
4| Volume – / Previous song:
– One-time press to the Previous song.
– Long press to decrease the Volume.
– FM Radio mode: one-time press to a previous Radio channel.
5| Play/Pause (Multi-function button);
– One-time press to Play/Pause song.
– One-time press to Answer/Hang-up call
– Press twice to Reject call.
– Voice Assistant press twice 2 seconds to activate Assistant – Long press 4 seconds to Power ON/OFF.
6| LED indicator;
– Red LED ON when the earphones are charging.
– Red LED OFF when the earphones are charged.
7| Miao-US8 charging port.
8| Aux. In.; Line Input Jack 3.5mm.

Bluetooth Mode

  1. Power ON the earphones (long press 4 seconds the Play/Pause button) [button n. 5].

  2. Press the M button [button n. 2] (short press) until you hear “Bluetooth Mode”.
    Bluetooth mode is the default mode selected when you turn on the earphones.

  3. On the media device (Smartphone/Computer/Tablet) you need to find the Vieta Pro Way 2 device and select to pair (accept pairing on your media device permissions).

This procedure is necessary only the first time you connect to the same device. After, if saved the Bluetooth settings on the smartphone, when turning on the Bluetooth in the smartphone, they will connect automatica­ lly.
It will pair successfully within 3 seconds with an indication sound to show it is connected.
If want to use the earphones on another smartphone or media device (computer, tablet, laptop..) must first unlink the connection they have established.

FM Radio Mode

  1. Power ON the earphones (long press 4 seconds the Play/Pause button) [button n. 5].
  2. Press the M button [button n. 2] (short press) until you hear “FM Radio Mode”.
  3. Long press the M button for 2 seconds [button n.2] to start the auto-tuner which will search the channels with the best quality recep­ tion to store in the channel list.
  4. Select the channel that you want to listen to through the Next [button n.3] and Previous [button n.4] buttons.

Memory Card (TF Card) Mode

  1. Store your music on a TF Card (microSD) (following the formats described).
  2. Power ON the earphones (long press 4 seconds the Play/Pause button) [button n. 5].
  3. Plug in the TF Card.
  4. You can use the buttons to select Next/Previous song, Play/Pause, and Increase/Decrease Volume, using the correct buttons listed above.

If the TF Card (microSD) with your media was connected when the earphones are turned on, it will start to reproduce this media from this source. If you want to select another mode, press the M button [button n.2] to change between modes (it’s recommended that you extract the TF Card from the earphones if you don’t use it).

Line In Mode

  1. Connect the Aux In. cable Jack 3.5mm (included in the package) to the earphones.
  2. Connect the other end of the cable to your media player device (Smartphone/Tablet/Computer).
  3. The earphones will go directly to the Line In mode. Don’t need to power ON (this mode works powering off the earphones) because don’t need to use this battery.
  4. If you want to change modes, you should first disconnect the Aux. In. Jack 3.5mm cable, and turn on the earphones (as indicated in the previous modes) and select, the mode that you want to use.

Using this mode, you cannot use the functions of the buttons on the earphones, because working in passive mode, you can’t use its electro­ nice and functions.

IMPORTANT

  1. Bluetooth pairing named Vieta Pro Way 2.

  2. Connect the mobile phone automatically after the earphones power on.
    If the connection cannot be made automatically, disable and enable Bluetooth on the media device to find them and pair them. Also, can try inserting and removing the earphones from the charging box to reset them.

  3. Please use a 5V charger with a micro-USS cable included in the pack (Smartphone or Tablet charger, or Computer USB port).

Declaration of conformity

Issuer’s name: FREEMASON AUDIOS.A
Address: Av. de Pau Casals 7, Entresuelo 2- 08021 Barcelona (Espana)
Tel: +34 93 1162491
CIF: A62829841
We declare under our own exclusive responsibility that the product:

  • Description: Wireless Earphones
  • Brand: Vieta Pro
  • Model: VHP-BT299
  • Manufacturer: FREEMASON AUDIOS.A
  • Manufacturing country: China
    referred to in this declaration is in compliance with the essential norms and standards
    EN 55032:2015
    EN 55035:2017
    in conformity with the provisions of the Directive 2014/30/UE of the European Parliament and of the Council of 29 de March of 2014.
    Barcelona 1 November de 2020

Carlos Alberdi
Product ManagerVIETA PRO VHP-BT299 2 Way Headphone -
signature

VIETA PRO logowww.vietapro.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals