WG660242 Singtel Wifi-6 Router SME Installation Guide
- June 26, 2024
- Singtel
Table of Contents
**WG660242 Singtel Wifi-6 Router SME Installation Guide
**
Installation Installation
Your quick and easy step-by-step guide to setting up your Fibre Broadband.
What’s in the box
Router x 1
Quick Installation Guide x 1
Power Cable x 1
Ethernet Cable x 1
Overview
RONT VIEW
BACK VIEW
Installing your Router
Please set up your Wi-Fi 6 Router as per the below diagram.
- Insert the Power Adapter into the Wi-Fi Router’s Power Port and plug it into the power outlet.
- Connect one end of the Ethernet cable to the LAN 1 port on the ONT and the other to the WAN port of the Router.
- Power up the Router and wait for the internet LED to light up.
- Connect your computer or mobile device to the Router via Wi-Fi using the Username and Password printed on the device label or use the ethernet cable to connect your computer to the Router’s LAN port.
Optimal Placement
- Router should be placed at a central location within the office, and preferably unobstructed.
- For optimal connection to eliminate Wi-Fi dead spots, consider adding Singtel Wi-Fi 6 Mesh Extender. Speak to a Singtel representative to learn more
How to Configure your Wi-Fi settings:
Scan here for detailed instructions.
Troubleshooting Steps if you encounter connectivity issues
- Turn off and turn on your Wi-Fi on your hand phone or device to reset the Wi-Fi connection.
- If issue persists, reboot the router.
LED Indicator
| LEDPower | LED behaviour White ON | Device statusDevice is receiving power |
|---|---|---|
| White Flashing | Device is booting | |
| Red ON | System failure | |
| Pink Flashing | FW is being upgraded | |
| Off | Power off | |
| Internet | White ON | WAN connection is functioning OK |
| White Flashing | Obtaining IP address | |
| Red ON | Internet connection failure | |
| Pink Flashing | Obtaining IP address via USB dongle | |
| Pink ON | WAN connection is functioning OK | |
| Off | No intemet link | |
| LAN (1-4) | White ON | Device is connected to one of the LAN |
| Off | No device is connected | |
| Mesh | White ON | WPS connection or Mesh pairing is successful |
| White Flashing | WPS or Mesh pairing starts | |
| Red ON | Mesh pairing failure | |
| Red Flashing | WPS connection failure | |
| Pink Flashing | One of the repeater lost connection | |
| Off | No device is connected |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>