MiBOXER RGB+CCT LED Floodlight Instruction Manual

Mi-Light
Subordinate New Brand
10/20/30/50/100W/200W RGB+CCT LED Floodlight
Model No.: FUTT02 / FUTT03 / FUTT04 / FUTT05 / FUTT06 / FUTT07 / FUTT08

Product Introduction

This product is made of an aluminum alloy bottom case and imported material covers with a fashionable appearance, waterproof and dustproof, energy-saving and environmental protection, etc features. Widely used on parks, apartments, gardens, and streets, etc.

| RGB+CCT 16 Million of colors to choose
---|---
| Dim brightness/Saturation
| Color temperature 2700K~6500K
| Beam Angle 160°
| Waterproof and dustproof grade IP65
| 2.4G RF wireless transmission technology
| Signal transmitting & Modes synchronization
| Remote control Control distance 30m
| Smartphone APP control (2.4GHz gateway is needed)
| Support third party voice control (2.4GHz gateway is needed)

Technical Parameters

FUTT02 (50W)

Input Voltage: AC100~240V 50/60Hz
Power: 50W
Working Temperature: -20~45°C
Color Temperature: 2700K~6500K
Luminous Flux: 4200LM
Light Efficiency: 85LM/W
Standby Power Consumption: 1.2W| CRI: >80
PF: >0.9
Beam Angle: 160°
IP Rate: IP65
RF: 2.4GHz
Control Distance: 30m
Lifespan: 50000 hours
---|---

FUTT03 (30W)

Input Voltage: AC100~240V 50/60Hz
Power: 30W
Working Temperature: -20~45°C
Color Temperature: 2700K~6500K
Luminous Flux: 2800LM
Light Efficiency: 85LM/W
Standby Power Consumption: 1.2W| CRI: >80
PF: >0.9
Beam Angle: 160°
IP Rate: IP65
RF: 2.4GHz
Control Distance: 30m
Lifespan: 50000 hours
---|---

FUTT04 (20W)

Input Voltage: AC100~240V 50/60Hz
Power: 20W
Working Temperature: -20~45°C
Color Temperature: 2700K~6500K
Luminous Flux: 1800LM
Light Efficiency: 85LM/W
Standby Power Consumption: 0.5W| CRI:>80
PF: >0.5
Beam Angle: 160°
IP Rate: IP65
RF: 2.4GHz
Control Distance: 30m
Lifespan: 50000 hours
---|---

FUTT05 (10W)

Input Voltage: AC100~240V 50/60Hz
Power: 10W
Working Temperature: -20~45°C
Color Temperature: 2700K~6500K
Luminous Flux: 900LM
Light Efficiency: 85LM/W
Standby Power Consumption: 0.5W| CRI:>80
PF: >0.5
Beam Angle: 160°
IP Rate: IP65
RF: 2.4GHz
Control Distance: 30m
Lifespan: 50000 hours
---|---

FUTT06 (10W)

Input Voltage: DC24V
Power: 10W
Working Temperature: -20~45°C
Color Temperature: 2700K~6500K
Luminous Flux: 900LM
Light Efficiency: 85LM/W
Standby Power Consumption: 0.5W| CRI:>80
Beam Angle: 160°
IP Rate: IP65
RF: 2.4GHz
Control Distance: 30m
Lifespan: 50000 hours
---|---

FUTT07 (100W)

Input Voltage: AC100~240V 50/60Hz
Power: 100W
Working Temperature: -20~45°C
Color Temperature: 2700K~6500K
Luminous Flux: 8500LM
Light Efficiency: 85LM/W
Standby Power Consumption: 0.65W| CRI:>80
PF: >0.9
Beam Angle: 160°
IP Rate: IP65
RF: 2.4GHz
Control Distance: 30m
Lifespan: 50000 hours
---|---

FUTT08 (200W)

Input Voltage: AC100~240V 50/60Hz
Power: 200W
Working Temperature: -20~45°C
Color Temperature: 2700K~6500K
Luminous Flux: 17000LM
Light Efficiency: 85LM/W
Standby Power Consumption: 0.96W| CRI:>80
PF: >0.95
Beam Angle: 160°
IP Rate: IP65
RF: 2.4GHz
Control Distance: 30m
Lifespan: 50000 hours
---|---

Dynamic Mode Sheet

Connection Diagram

FUTT02 / FUTT03 / FUTT04 / FUTT05 / FUTT07 / FUTT08

FUTT06
Input Voltage DC 24V, don’t need to distinguish polarity on the connection

Signal transmitting

One lighting fixture can transmit the signals from the remote control to another lighting fixture within 30m, as long as there is a lighting fixture within 30m, the remote control distance can be limitless.

Modes synchronization

Different lighting fixtures can work synchronously when they are started at different times, controlled by the same remote, under the same dynamic mode, and within 30m distance.

Link/Unlink

Compatible with these remote controls (Purchased separately)

NOTE:
Lighting can be working after linking with remote; for more details, pls read the remote instruction.

Attention

1. When installing the lighting fixtures, pls switch off the power to make sure safety.
2. The working power is a high voltage alternating current, so it must be far away from people and must with ground connection.
3. As the power is large, the user must choose a suitable power cable when connecting.
4. Non-professional users cannot dismantle the lighting fixtures directly, otherwise, it may cause fire and electric shock.
5. Please do not use lighting fixtures around the mental area and high magnetic field, otherwise, it will badly affect the control distance.
6. Users must be correct, strict, and solid to install the lighting fixtures; do not use the lighting fixtures on strenuous vibration areas.

Signal transmitting & Modes synchronization
Made in China

Documents / Resources

| MiBOXER RGB+CCT LED Floodlight [pdf] Instruction Manual
MiBOXER, Mi-Light, RGB CCT, LED, Floodlight, FUTT02, FUTT03, FUTT04, FUTT05, FUTT06, FUTT07, FUTT08
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>