MIBOXER Dual White LED Controller Kits User Manual
- June 6, 2024
- MiBOXER
Table of Contents
Subordinate New Brand
Introduction
The controller adopts the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting, and strong anti- interference, etc. The controller has an auto-transmitting function. Widely used on the controlling of hotel lighting and home lighting.
Button Diagram
Dual White LED Controller Kits
Model No.: FUT035SA
LED Controller
Working Voltage: DC12V~24V
Output: 12A/Channel
Total Output: Max 12A
RF: 2.4GHz
Control Distance: 30m
Working Temperature: -10~40°C
Output Connection: Common anode
Sunrise Remote
Working Voltage: 3V(AAA*2PCS)
Transmitting Power: 6dBm
Standby Power: 20uA
RF: 2.4GHz
Modulation Method: GFSK
Single Color LED Controller Kits
Model No.: FUT036SA
LED Controller
Working Voltage: DC12V~24V
Output: Max 12A
RF: 2.4GHz
Control Distance: 30m
Working Temperature: -10~40°C
Output Connection: Common anode
Sunrise Remote
Working Voltage: 3V(AAA*2PCS)
Transmitting Power: 6dBm
Standby Power: 20uA
RF: 2.4GHz
Modulation Method: GFSK
| Color temperature adjustable
---|---
| Dim brightness
| 2.4G RF wireless transmission technology
| Remote control Control distance 30m
| Smartphone APP control (2.4GHz gateway is needed)
| Support third party voice control (2.4GHz gateway is needed)
| Dim brightness
| 2.4G RF wireless transmission technology
| Remote control Control distance 30m
| Smartphone APP control (2.4GHz gateway is needed)
| Support third party voice control (2.4GHz gateway is needed)
Install The Battery For Remote
Note: 2*AAA Battery need to buy separately
- Open battery cover behind the remote.
- Install battery correctly and close battery cover.
Remote Instruction
-
Adjust color temperature
Short press key once, then touch to adjust color temp. -
Adjust brightness
Short press key once, then touch to adjust brightness.
Linking Code / Unlinking Code Instructions
Attention: No need to match code since its already matched code in the
factory setting
Linking Code Instructions
Linking failed if the light is not blinking slowly, Please follow the above steps again. (Note: a controller that has linked can’t link again)
Unlinking Code Instructions
****Unlinking failed if the light is not blinking quickly, Please follow the above steps again. (Note: controller haven’t linked that don’t need to unlink)
Signal transmitting
One controller can transmit the signals from the remote control to another controller within 30m, as long as there is a controller within 30m, the remote control distance can be limitless.
PWM high frequency / low-frequency switching
Switch to high frequency (8KHz): on the condition of turning on the light
- Short press the “OFF” button of the remote control once;
- Short press the “ON” button 5 times within 3 seconds, the white light blinks 2 times quickly, indicating successfully.
Switch to low frequency (500Hz): on the condition of turning off the light
- Short press the “ON” button of the remote control once;
- Short press the “OFF” button 5 times within 3 seconds, the white light blinks 2 times slowly, indicating successfully.
Attention
- Please check whether the voltage of the power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise, the controller will be broken.
- Please don’t connect wires with power on. Please turn on again only when it is in the right connection and no short circuit.
- Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.
Controller can not use in a humid area
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>