terra LCD/LED 2462W User Manual
- June 6, 2024
- terra
Table of Contents
LCD/LED 2462W
LCD/LED 2462W
USER MANUAL
+ GERMAN + ENGLISH + FRENCH + SPANISH + ITALIAN + RUSSIAN
Safety Precautions and Maintenance
1
Basic setup
2
Screen image setups
2
Functions
3
BRIGHTNESS
3
IMAGE
3
English
COLOR TEMP.
4
OSD SETTING
5
RESET
6
MISC
7
Installing the LED Monitor
8
Supporting Timing Modes
9
Troubleshooting
10
SPECIFICATIONS:
11
English
Safety Precautions and Maintenance
Read this manual carefully and retain for future reference
1. Unplug the monitor before cleaning it with a slightly damp cloth. 2.
Wiping the screen with a dry cloth is recommendable, and only during the power
has
been switched off. 3. Do not use alcohol or ammonia-based liquids. 4. This
monitor is designed with ventilation holes on the cabinet back, please do not
cover
them or block it. 5. Also avoid placing the monitor near the electric heater
or heater, including in an enclosed
room with no ventilations. 6. Please do not insert any matter or spray any
liquid on it. 7. Please do not position the monitor on unsafe space, if it
falls, it may be damaged and
may hurt the user. 8. Unplug the monitor if it is not going to be in use for
an extended period of time. 9. Please do not put heavy items on the monitor,
or electric cord. 10. Please do not open the monitor back panel because the
monitor contained high voltage
current.
Contents
Monitor DVI cable Power cord Adapter Warranty card Quick start guide Audio
cable
Features
16.7M high quality image colors Smart image screen setting-OSD with simple
layout and easy selection Smart control interfaces for easy settings
EU product database for energy label and product information sheet.
2462Whttps://eprel.ec.europa.eu/qr/385562
1
English
Basic setup
a) Connect a DVI cable, HDMI cable or DisplayPort cable to the PC (signal
output) and to the monitor.
HDMI connector
DC IN
DisplayPort connector
DVI connector
Audio connector
b) The monitor has a wide power voltage range; it can be used on AC100-240V~
50/60Hz power supply.
c) Connect the power cable to the Monitor power socket and to the power source
in the room.
d) Turn on the power source supply.
e) To switch on the monitor, press the power control key.
Screen image setups
The right side of the monitor has five keys to adjust the monitor settings
with aid of the OnScreen Display.
2 Confirm selection OSD / When not in OSD-Menu: source selection Adjust the
options-move up / When not in OSD-Menu: call the ANTI BLUE LIGHT menu Adjust
the options-move down or lower / When not in OSD-Menu: call the BRIGHTNESS
menu Shows main menu/ Exit from menu
1 Press 1 key long-term: OSD LOCKED Then press 1 key long-term: OSD UNLOCKED
Power ON/OFF Press key long-term: POWER LOCKED Then press key long-term: POWER
UNLOCKED
Note: Changing OSD settings may increase power consumption.
2
Functions:
English
BRIGHTNESS
Press 1 button the main menu will appear as follows: Press / button to select
BRIGHTNESS in the main menu, then press 2 button to enter.
BRIGHTNESS
BRIGHTNESS CONTRAST PICTURE MODE DCR OD
80 50 STANDARD OFF OFF
1EXIT
2 SELECT
BRIGHTNESS Press / button to select BRIGHTNESS, then press 2 button
confirmation choice and
press / button to adjust.
CONTRAST Press / button to select CONTRAST, then press 2 button confirmation
choice and
press / button to adjust.
PICTURE MODE Press / button to select PICTURE MODE, then press 2 button
confirmation choice
and press / button to select (STANDARD, MOVIE, GAME, TEXT).
DCR (Dynamic Contrast Ratio) Press / button to select DCR, then press 2 button
confirmation choice and press / button to choose ON or OFF.
OD (Overdrive) Press / button to select OD, then press 2 button confirmation
choice and press / button to choose ON or OFF.
IMAGE
Press 1 button to select IMAGE in the main menu, then press 2 button to enter.
3
English
ASPECT
IMAGE
WIDE
1EXIT
2SELECT
ASPECT Press / button to select ASPECT, then press 2 button confirmation
choice and press / button to select WIDE or 4:3.
COLOR TEMP.
Press / button to select COLOR TEMP. in the main menu, then press 2 button to
enter.
COLOR TEMP.
COLOR TEMP. RED GREEN BLUE ANTI BLUE LIGHT
NORMAL 50 50 50
0
1 EXIT
2 SELECT
COLOR TEMP. Press / button to select COLOR TEMP., then press 2 button
confirmation choice and Press / button to choose the color temperature
(NORMAL, WARM, USER, COOL).
RED When you choose the User Press / button to select RED, then press 2 button
to adjust the value of the three primary colors of red.
4
English
GREEN When you choose the User Press / button to select GREEN, then press 2
button to adjust the value of the three primary colors of green.
BLUE When you choose the User Press / button to select BLUE, then press 2
button to adjust the value of the three primary colors of blue.
ANTI BLUE LIGHT Decreases the blue light emitted from the display to reduce
the risk of blue light exposure to your eyes.
OSD SETTING
Press / button to select OSD SETTING in the main menu, then press 2 button to
enter.
OSD SETTING
LANGUAGE
OSD H. POS.
50
OSD V. POS.
50
OSD TIMER
15
TRANSPARENCY
0
1EXIT
2SELECT
LANGUAGE Press / button to select LANGUAGE, then press 2 button confirmation
choice and press / button to select, then press 2 button confirmation choice.
(ENGLISH, FRANÇAIS, DEUTSCH, ITALIANO, ESPAÑOL, )
OSD SETTING
ENGLISH FRANÇAIS DEUTSCH ITALIANO ESPAÑOL
1EXIT
2SELECT
5
English
OSD H.POS. Press / button to select OSD H.POS. then press 2 button
confirmation choice and Press button OSD toward the right direction. Press
button OSD toward the left direction.
OSD V.POS. Press / button to select OSD V.POS. then press 2 button
confirmation choice and Press button OSD toward the up direction. Press button
OSD toward the down direction.
OSD TIMER Press / button to select OSD TIMER, then press 2 button confirmation
choice and Press / button to adjust.
TRANSPARENCY Press / button to select TRANSPARENCY, then press 2 button
confirmation choice and Press / button to adjust.
RESET
Press / button to select RESET in the main menu, then press 2 button to enter.
RESET
RESET
1EXIT
RESET To recall factory settings for Video & Audio controls.
2 SELECT
6
English MISC
Press / button to select MISC in the main menu, press 2 button to enter.
MISC
SIGNAL SOURCE VOLUME AUDIO INPUT
DVI 50
ANALOG
1920X1080 60Hz
1EXIT
2SELECT
SIGNAL SOURCE Press / button to select SIGNAL SOURCE, then press 2 button
confirmation choice and press / button to select DVI, HDMI or DisplayPort then
press 2 button confirmation choice.
VOLUME Press / button to select VOLUME, then press 2 button confirmation
choice and press / button to adjust.
AUDIO INPUT (only available in HDMI and DisplayPort mode) Press / button to
select AUDIO INPUT in the main menu then press 2 button confirmation choice
and press / button to select (DIGITAL or ANALOG).
7
English
OSD LOCKED
Press 1 key long-term to lock the OSD
POWER LOCKED
Press key long-term to lock the power button
Installing the LED Monitor
OSD UNLOCKED
Then press 1 key long-term to unlock the OSD
POWER UNLOCKED
Then press key long-term to unlock the power button
1. Place the monitor face down on a soft cloth or cushion on a table. 2. Install the stand base to the monitor.
8
English
Supporting Timing Modes
Standard MAC VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA
Resolutions 640×480@67Hz 640×480@72Hz 640×480@75Hz 800×600@56Hz 800×600@60Hz 800×600@72Hz 800×600@75Hz 1024×768@60Hz 1024×768@70Hz 1024×768@75Hz 1280×800@60Hz 1152×864@60Hz 1280×1024@60Hz 1280×1024@75Hz 1440×900@60Hz 1600×1200@60Hz 1680×1050@60Hz 1920×1080@60Hz
DVI-D
HDMI
DisplayPort
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to your monitor.
9
English
Troubleshooting
1. NO Image on Screen
a) Check if the power button has been switched on. b) Verify the brightness
and contrast of the monitor is within the normal setting. c) Check the power
indicator is orange. If so this indicates that the monitor is not receiving
the input signal. d) If the signal source is notebook or laptop, make sure
that the signal has been switched
to screen mode.
2. Non-focus Image
a) Check if the image signal cable is inserted properly (upright position).
3. Flash Screen
a) The power is insufficient to connect the monitor or too weak. b) To avoid
magnetic field around the monitor, do not place these devices close to it.
Such
as speakers, fluorescence lightings, AC transformer, table fan, and etc.
4. Wrong or Unusual Colour
a) if red, green, blue or any of the colour disappears, check to see if the
signal cord is connected properly. If the plug is loosely connected it might
cause bad connection.
b) Try connecting to another PC for comparison.
5. How to Clean the Monitor
a) Make sure that the monitor power has been switched off. b) Do not spray any
liquid on the screen or the plastic panel directly.
6. When Cleaning the Screen
a) Use clean, soft no fur materials to clean the screen. b) If it is still
dirty, do add a little of non-ammonia liquid and non-alcohol glass cleanser to
clean the screen.
7. When Cleaning the Plastic Panel
a) Use soft dry cloth. b) To add a little of non-ammonia liquid and non-
alcohol of non-abrasion cleanser to clean
surface if it is still unclean.
10
SPECIFICATIONS:
Dimension Monitor type
Brightness
Color
Resolutions
Power requirement
Power Mains adapter
Power consumption
DVI-D
Input
HDMI
connector DisplayPort
Audio Input
Environment
23.8 LED 250 cd/m² 16.7M 1920X1080@60Hz 100-240V ~ 50/60Hz FSP-030-RHAN2 DC12V
2.5A <30W DVI Digital HDMI Ver1.3 Connector DisplayPort Ver1.2 Connector 3.5mm
stereo Jack
Operation Temp:0°C ~ 40°C Humidity: Less than 80%
Storage Temp:-20°C ~ 60°C
English
11
WEEE Statement
Wichtige Recyclinginformation Das Gerät darf nach dem Ende der Nutzungszeit
nicht mit dem Restmüll entsorgt werden. Bitte führen Sie es zur
umweltgerechten Entsorgung den kommunalen Altgeräte-Sammelstellen zu. Für
weitere Informationen wenden Sie sich bitte an die unten stehende Adresse.
Important Information for Recycling This warning sign of trash bin indicates
that the objects are not allowed to be disposed as general refuse. Please
follow the local act and carry out further disposal with refuse recycling and
collecting system in your Country or District. Please contact the address
below for more information on recycling.
Informations importantes relatives au recyclage En fin de vie, cet appareil ne
dois pas étre jeté aux ordures ménagères. Veuillez respecter les
réglementations locales et rester en conformité avec le système de collecte et
de recyclage des ordures en vigueur dans votre région. Pour plus d’information
sur le recyclage, veuillez contacter votre centre de recyclage agréé. Votre
attitude quand au recyclage améliorera l’avenir de la planète et créera un
environnement de vie de qualité pour les générations futures.
Wortmann AG Bredenhop 20 D-32609 Hüllhorst
Tel. +49 (0) 5744 / 944-0 Fax +49 (0) 5744 / 944-444
www.wortmann.de info@wortmann.de
GENERAL PUBLIC LICENSE (GPL) – VER.2
Lizenzinformation Open Source Software/GPL Sourcecode Dieses Produkt enthält Software, die von Dritten stammt, darunter auch Software, die unter der GNU General Public License Version
GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
2 (“GPLv2″) und der GNU Lesser Genberal Public License, Version 1.2 (LGPLv2.1) lizenziert ist. Solche Programmbestandteile werden
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
nachfolgend als ,,Programm” oder ,,Program” bezeichnet.
Schriftliches Angebot des GPL/LGPL Sourcecodes Wir werden gegen Erstattung der
Kosten für den Datenträger und den Versand des Datenträgers auf Nachfrage
jedermann den Sourcecode der GPL- und LGPL-Bestandteile der Software auf einer
CD-ROM oder einem ähnlichen Datenträger übersenden. Dieses Angebot ist gültig
für einen Zeitraum von drei Jahren ab Erwerb des Produktes. Bei Nachfragen im
Zusammenhang mit GPLv2 und LGPLv2.1: Bitte richten Sie alle GPL/LGPL-
Nachfragen an die nachfolgend angegebene Adresse. Wir weisen darauf hin, dass
unter der angegebenen Adresse kein technischer Support geleistet wird.
LICENSE STATEMENT / GPL CODE STATEMENT This product includes software code
developed by third parties, including software code subject to the GNU General
Public License Version 2 (“GPLv2″) and the GNU Lesser Genberal Public License,
Version 1.2 (LGPLv2.1). These parts of the software are hereinafter
Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software–to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors` reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow.
referred to as ,,the or this Program ”
WRITTEN OFFER FOR GPL/LGPL SOURCE CODE We will provide everyone upon request
the applicable GPL and LGPL source code files via CD-ROM or similar storage
medium for a nominal cost to cover shipping and media charges as allowed under
the GPL/LGPL. This offer is valid for 3 years. GPLv2 and LGPLv2.1 inquiries:
Please direct all GPL/LGPL inquiries to the following address. Note that
technical support inquiries will
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The ,,Program “, below, refers to any such program or work, and a ,,work based on the Program “means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term ,,modification “.) Each licensee is addressed as ,,you “. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.
not be supported at the below address.
WORTMANN AG – GPL ANFRAGE Bredenhop 20
1. You may copy and distribute verbatim copies of the Program`s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
32609 Hüllhorst Deutschland
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
NO WARRANTY This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR
DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
a) You must cause the modified files to carry prominent notices stating that
you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in
part contains or is derived from the Program or any part thereof, to be
licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you
must cause it, when started running for such interactive use in the most
ordinary way, to print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or else, saying that
you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print
such an announcement, your work based on the Program is not required to print
an announcement.) These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program, and can
be reasonably considered independent and separate works in themselves, then
this License, and its terms, do not apply to those sections when you
distribute them as separate works. But when you distribute the same sections
as part of a whole which is a work based on the Program, the distribution of
the whole must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it. Thus, it is not the intent of this section to
claim rights or contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of derivative
or collective works based on the Program. In addition, mere aggregation of
another work not based on the Program with the Program (or
IT. MADE IN GERMANY.
Artikel-Nr.: 8001047, Stand 08/2015
with a work based on the Program) on a volume of a storage or distribution
medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under
Section 2) in object code or executable form under the terms of Sections 1 and
2 above provided that you also do one of the following: we use this doubled UL
to get the sub-sections indented, while making the bullets as unobvious as
possible.
a) Accompany it with the complete corresponding machinereadable source code,
which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give
any third party, for a charge no more than your cost of physically performing
source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed only for
noncommercial distribution and only if you received the program in object code
or executable form with such an offer, in accord with Subsection b above.) The
source code for a work means the preferred form of the work for making
modifications to it. For an executable work, complete source code means all
the source code for all modules it contains, plus any associated interface
definition files, plus the scripts used to control compilation and
installation of the executable. However, as a special exception, the source
code distributed need not include anything that is normally distributed (in
either source or binary form) with the major components (compiler, kernel, and
so on) of the operating system on which the executable runs, unless that
component itself accompanies the executable. If distribution of executable or
object code is made by offering access to copy from a designated place, then
offering equivalent access to copy the source code from the same place counts
as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so
long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the
Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program
(or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing
or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program),
the recipient automatically receives a license from the original licensor to
copy, distribute or modify the Program subject to these terms and conditions.
You may not impose any further restrictions on the recipients` exercise of the
rights granted herein. You are not responsible for enforcing compliance by
third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or otherwise)
that contradict the conditions of this License, they do not excuse you from
the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the Program at all.
For example, if a patent license would not permit royalty-free redistribution
of the Program by all those who receive copies directly or indirectly through
you, then the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program. If any portion of this
section is held invalid or unenforceable under any particular circumstance,
the balance of the section is intended to apply and the section as a whole is
intended to apply in other circumstances. It is not the purpose of this
section to induce you to infringe any patents or other property right claims
or to contest validity of any such claims; this section has the sole purpose
of protecting the integrity of the free software distribution system, which is
implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in
reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through
any other system and a licensee cannot impose that choice. This section is
intended to make thoroughly clear what is believed to be a consequence of the
rest of this License.
8. If the distribution and/or use of the Program is restricted in certain
countries either by patents or by copyrighted interfaces, the original
copyright holder who places the Program under this License may add an explicit
geographical distribution limitation excluding those countries, so that
distribution is permitted only in or among countries not thus excluded. In
such case, this License incorporates the limitation as if written in the body
of this License.
9. The Free Software Foundation may publish revised and/or new versions of
the General Public License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in detail to address
new problems or concerns. Each version is given a distinguishing version
number. If the Program specifies a version number of this License which
applies to it and ,,any later version “, you have the option of following the
terms and conditions either of that version or of any later version published
by the Free Software Foundation. If the Program does not specify a version
number of this License, you may choose any version ever published by the Free
Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs
whose distribution conditions are different, write to the author to ask for
permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this.
Our decision will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of
software generally.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM ,,AS IS “WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If
you develop a new program, and you want it to be of the greatest possible use
to the public, the best way to achieve this is to make it free software which
everyone can redistribute and change under these terms. To do so, attach the
following notices to the program. It is safest to attach them to the start of
each source file to most effectively state the exclusion of warranty; and each
file should have at least the “copyright” line and a pointer to where the full
notice is found.
<one line to give the program`s name and a brief idea of what it does.>
Copyright (C)
This program is free software: you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with
this program. If not, see http://www.gnu.org/licenses/.
Also add information on how to contact you by electronic and paper mail. If
the program does terminal interaction, make it output a short notice like this
when it starts in an interactive mode:
IT. MADE IN GERMANY.
Artikel-Nr.: 8001047, Stand 08/2015
Bredenhop 20 32609 Hüllhorst Tel +49 5744.944-0_Fax +49 5744.944-100 www.wortmann.de