terra 31.5 Inch 80cm 2560×1440 Curved LED TV User Manual

terra 31.5 Inch 80cm 2560×1440 Curved LED TV

Operation Instructions

Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation. This monitor has been tested and found compliant with the CE mark. These limits are designed to provide proper protection against harmful interference to a residential installation. This monitor generates, uses, and can radiate radio frequency energy. Harmful interference to radio communication may be led as a result if it‘s not properly installed and used. However, there is no guarantee that interference will not occur in a particular installation. If this monitor does cause serious interference to radio or television reception, resetting the monitor may determine it. Moreover, users are encouraged to correct the interference by doing one or more of the following:

• Reorient or relocate the receiving antenna.
• Move the monitor and the receiver further away from each other.
• Connect the monitor into an outlet on a circuit different from that to which the receiver is connected.
• Consult your local dealer or a qualified technician.

Warning
To assure a continued compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this monitor would void the user‘s authority to operate this device.

Note : If necessary, shielded interface cables and AC power cord must be used to meet the emission level limits.

Safety Precautions

This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy.

Warning

• This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor. If you’re unsure of the power supply in your residence, consult your local dealer or power company.
• Do not try to repair the monitor yourself as it contains no user-serviceable parts. The monitor should only be repaired by a qualified technician.
• Do not remove the monitor cabinet. There are high-voltage parts inside that may cause an electric shock to human bodies, even when the power cord is disconnected.
• Ensure that the power cord is connected to a grounded power outlet before turning on the monitor.
• If smoke, abnormal noise, or odor came out from your monitor, caution you should remove the power cord immediately and call your service center.
• Put your monitor only in a clean, dry environment. Unplug the monitor immediately if gets wet and consult your service technician.
• Avoid exposing your monitor directly to sunlight or another heat source.
• Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia-based cleaner onto the cloth, not directly onto the glass screen.
• Keep the monitor away from magnetic objects, motors, TV sets, and transformers.
• Do not place heavy objects on the cable or power cord.
• For PLUGGABLE EQUIPMENT, the Socket-outlet shall be installed near the equipment and shall be easily accessible.
• Please do not position the monitor on an unsafe space, if it falls, it may be damaged and may hurt the user.
• Unplug the monitor if it is not going to be in use for an extended period of time.
• Pay attention to all cables connected to the monitor against stumble hazards.

First Setup

Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories:

• AC Power cord
• Audio cable
• Warranty card
• DisplayPort cable
• Quick start guide

Quick Installation

Connect Video cable (DisplayPort cable)
Make sure both monitor and computer are powered OFF. Connect the DisplayPort cable from DisplayPort output of computer to the DisplayPort input of the monitor.Or connect HDMI cable Optional Connect the HDMI cable from HDMI output of computer to the HDMI input of the monitor. Important note: Make sure that the graphic card supports the full resolution (2560×1440) via DisplayPort or HDMI！ Or connect DVI cable Optional
Connect the DVI cable from DVI output of computer to the DVI input of the monitor. Important note: Use a DVI dual-link cable and Make sure that the graphic card supports the full resolution (2560×1440) via DVI！

Connect Power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.

Connect Audio cable
Connect the Audio cable from Audio output of computer to the Audio input of the monitor.

Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.

Windows users
Setting the Timing Mode (Resolution and Refresh Rate) Example: 2560 x 1440 @ 144 Hz Resolution Right-click on the Windows desktop > Display Settings > Advanced Display Settings. Set the resolution.Refresh Rate (vertical frequency) See your graphic card’s user guide for instructions.

Installing the LCD Monitor

Installing the Stand Base

• Place the monitor face down on a soft cloth or cushion on a table.
• Fit the two tabs on the upper part of the stand to the groove on the back of the monitor and push the snaps until it into place then released.
• Install the stand base to the stand, then tighten the screw that fixes the stand base to the stand.

Note : To secure or release a screw, a screwdriver or a coin is required.

**Disconnecting the Stand Base

**

• Place the monitor face down on a soft cloth or cushion on a table.
• Release the screw that fixes the stand base to the stand, then pull the stand base backward away from the stand.
• Push the snaps and hold the stand, lift the stand up and away from the monitor.

Note : To secure or release a screw, a screwdriver or a coin is required.

Front View of the Product

Rear View of the Product

Using On Screen Display (OSD) Functions

| Power ON/OFF (press the button)
---|---
When in OSD menu, press more than 3 seconds to switch display power

off

◄| Display main menu
Exit from OSD menu
►| Manual adjust mode select for DVI, HDMI, DisplayPort mode
Confirm the Select

▲

| Select the desired item when in OSD menu
When not in OSD menu, directly enters the Anti Blue Light menu
OSD Lock (when not in OSD menu, Press more than 5 seconds)

▼

| Select the desired item when in OSD menu
When not in OSD menu, directly enters the Brightness menu
Power Lock (when not in OSD menu, Press more than 5 seconds)

Note : Changing OSD settings may increase power consumption.

Main Menu

Short Cuts Function from the button(s)
Input Source: When Input Source is pressed, change Input signal to DVI, HDMI or DisplayPort.

Brightness/Contrast
To manually adjust the Brightness, Contrast and DCR

• Brightness : To adjust the luminance of the video. ▲ : increase brightness, ▼: decrease brightness.
• Contrast : To adjust the foreground white level of screen image. ▲ : increase contrast, ▼: decrease contrast.
• DCR : To detect the distribution of the visual signals inputs, and create an optimized contrast. Press ► key to adjust the DCR On or Off.

Color Setting
To select the color for improving brightness and color saturation between Gamma, Picture Mode, Color Temperature and Anti Blue Light.

• Gamma : To adjust the Gamma value, low gamma values display whitish images and high gamma values display blackish images.

• Picture Mode : Provides an optimum display environment depending on the contents displayed. It contains 4 user-selectable presets. Standard is for general windows environment and monitor default setting. Photo optimized for displaying outdoor scenery images. Movie optimized for movie and video environment. Game optimized for PC game environment.

• Color Temperature : To adjust the default picture color. It contains 4 user-selectable presets. Warm: Adds green to screen image for a darker color.\

• Normal : Adds red to screen image for warmer white and richer red.

• Cool : Adds blue to screen image for cooler white.

• User : Individual adjustments for Red (R), Green (G), Blue (B).
  Press button ► to select the desired color.
  Press ▼ or ▲ button to adjust selected color.

• Anti Blue Light : Decreases the blue light emitted from the display to reduce the risk of blue light exposure to your eyes.

Picture Quality Setting
According to the overall image quality configuration

• Sharpness: To adjust the clarity of a non-WQHD Resolution (2560×1440) signal with ▼ or ▲ button.
• Over Drive: Allows the user to change the Over Drive strength. Improve the quality of the motion pictures. Press ► key to adjust the Over Drive On or Off.
• FreeSync: To control support FreeSync. Press ► key to adjust the FreeSync On or Off.

Display
To manually adjust the Aspect Ratio. Aspect Ratio : To select the video mode from Full Screen , 4:3 or 1:1 Full Screen: To select full-screen size image. 4:3 : To select 4:3 image size. 1:1 : To select 1:1 image size.

Audio
To adjust the audio functions.

• Volume: To adjust the volume of speaker output.
• Audio Source: To select where the audio source comes from Line-In, HDMI or DisplayPort.

Other
To set up Language, OSD H-Position, OSD V-Position, OSD Transparency, OSD Time Out, OSD Rotation, Resolution note and Reset.

• Supporting Timing Modes : To allow users to choose from available languages.
• OSD H-Position: To horizontally adjust the OSD position. ▲ : move OSD to the right, ▼: move OSD to the left.
• OSD V-Position: To vertically adjust the OSD position. ▲ : move OSD to the right, ▼: move OSD to the left.
• OSD Transparency: To adjust the transparency of the OSD background.
• OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period of time.
• OSD Rotation: Rotates the OSD by Normal/90/180/270 degrees.
• Resolution note: When PC resolution not on 2560×1440 will send a message remind. Press ► key to adjust the Resolution note On or Off.
• Reset: To recall factory settings for Video & Audio controls. Press button ► to select the Reset menu option.

Supporting Timing Modes

Video Timing Modes

• 480i
• 480p
• 576i
• 576p
• 720p
• 1080i
• 1080p

Warning : Do not set the graphic card in your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to your monitor.

Technical Information

Power Management

| VESA DPMS compatible Off Mode, ≤ 0.3 W

Displayable Resolution

| WQHD 2560 x 1440 max.

Vertical Frequency 144Hz max.

Pixel Dimension| 0.2724 x 0.2724 mm
LCD Display Color| 16.7M
Active Display Area| 697.334 mm x 392.256 mm

Temperature

| Operating: 0°C ~ + 40°C Storage: -20°C ~ + 60°C
Compliance| CE, WEEE
Power| Input Voltage AC100-240 V
Speaker| 3W x 2

Care and Maintenance

• Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare.
• Put your monitor in a well ventilated area.
• Do not place any heavy things on top of your monitor.
• Make certain your monitor is installed in a clean and moisture-free area.
• Keep your monitor away from magnets, motors, transformers, speakers, and TV sets.
• Move the monitor out of the package and take off the plastic bag and Polystyrene Foam.
• Adjust the tilt of the screen for an optimum seating and viewing position.
• If smoke, abnormal noise or odor came out from your monitor, caution you should remove the power cord immediately and call your service center.
• Never remove the rear cover of your monitor cabinet. The display unit inside contains high-voltage parts and may cause electric shock to human bodies.
• Never try to repair your monitor yourself. Always call your service center or a qualified technician to fix it.

**Troubleshooting

**

No power

• Make sure AC power cord is securely connected to the power adapter and the power supply is firmly connected to the monitor.
• Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage.
• Make sure all signal cables are installed.
• Make sure the video cable supplied with the monitor is tightly secured to the video output port on back of the computer. If not, tightly secure it.
• Adjust brightness.
• If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection.
• Connect the monitor to another computer.

Important Information for Recycling
This warning sign of trash bin indicates that the objects are not allowed to be disposed as general refuse. Please follow the local act and carry out further disposal with refuse recycling and collecting system in your Country or District. Please contact the address below for more information on recycling.\

LICENSE STATEMENT / GPL CODE STATEMENT
This product includes software code developed by third parties, including software code subject to the GNU General Public License Version 2 (“GPLv2”) and the GNU Lesser General Public License, Version 1.2 (LGPLv2.1). These parts of the software are hereinafter referred to as „the or this Program “

WRITTEN OFFER FOR GPL/LGPL SOURCE CODE
We will provide everyone upon request the applicable GPL and LGPL source code files via CD-ROM or similar storage medium for a nomi- nal cost to cover shipping and media charges as allowed under the GPL/LGPL. This offer is valid for 3 years.
GPLv2 and LGPLv2.1 inquiries: Please direct all GPL/LGPL inquiries to the following address. Note that technical support inquiries will not be supported at the below address.

NO WARRANTY
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMA- GES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

GNU GENERAL PUBLIC LICENSE Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble
The licenses for most software are designed to take away your freedom to share and change it.
By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software–to make sure the software is free for all its users. This General Public Licen- se applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors‘ reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

1. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The „Program “, below, refers to any such program or work, and a „work based on the Program “means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
   (Hereinafter, translation is included without limitation in the term „modification “.) Each licensee is addressed as „you “. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. You may copy and distribute verbatim copies of the Program‘s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropri- ate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work ba- sed on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Pro- gram itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.

3. In addition, mere aggregation of another work not based on the Program with the Program (or  with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: we use this doubled UL to get the sub-sections indented, while making the bullets as unobvious as possible.

   • a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange
   • b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange
   • c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Sub- section b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable.
   • However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating sys- tem on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the reci- pients‘ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agree- ment or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distri- bute the Program at all. For example, if a patent license would not permit royalty-free redistribu- tion of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.

8. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.

9. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

10. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such a case, this License incorporates the limitation as if written in the body of this License.

11. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License that applies to it and „any later version “, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

12. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

13. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM „AS IS “WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

14. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

15. NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL

16. CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: The hypothetical commands show w ‘andshow c ‘should show the appropriate parts of the Gene- ral Public License. Of course, your program‘s commands might be different; for a GUI interface, you would use an “about box”. You should also get your employer (if you work as a programmer) or school, if any, to sign a “copy- right disclaimer” for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see http://www.gnu.org/licenses/. The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read http://www.gnu.org/philosophy/why-not-lgpl.html

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>